For the last few days all recordings on one of my machines have failed to record. Directly entered recordings and all scheduled recordings have recorded only a few megabytes of information and then stopped. This is on a computer that has been working perfectly for a long time.
I am using version 1.2.9 with 2 Hauppauge PVR 150MCE capture cards. I don't know much about which log should show me what but I found this when I checked GBPVRRecordingService logs:
2008-08-30 15:47:01.328 VERBOSE Hauppauge WinTV PVR PCI II Encoder
2008-08-30 15:47:01.328 VERBOSE Encoder.GetMedium(p656Pin) returns: {7D82C13C-452C-445F-A55E-90227B0F26C3}-007FD508-00000000
2008-08-30 15:47:01.328 VERBOSE Pin mediums match...
2008-08-30 15:47:01.343 VERBOSE ConnectFilters@1
2008-08-30 15:47:01.343 VERBOSE ConnectFilters@2 got source pin
2008-08-30 15:47:01.343 VERBOSE ConnectFilters@3 got dest pin
2008-08-30 15:47:01.343 VERBOSE Connection attempt failed: 0x80040207
Error code : 80040207
DIERR_NOTBUFFERED & VFW_E_NO_ACCEPTABLE_TYPES
Attempted to read buffered device data from a device that is not buffered. & There is no common media type between these pins.
2008-08-30 15:47:01.343 VERBOSE ConnectFilters@2 got source pin
2008-08-30 15:47:01.343 VERBOSE ConnectFilters@3 got dest pin
2008-08-30 15:47:01.343 VERBOSE Connection attempt failed: 0x80040207
Error code : 80040207
DIERR_NOTBUFFERED & VFW_E_NO_ACCEPTABLE_TYPES
Attempted to read buffered device data from a device that is not buffered. & There is no common media type between these pins.
Can someone tell me if I am looking in the right place and what this means?
i de-checked the exit "plugin" in the config utility, but it's still shown.
I don't need it, 'coz i can exit the pvrx2 frontend using the system screen.
I had a setup with a single hauppauge nova-s plus tuner. All was working well so I purchased and installed another one. The first one is working still but the second one will only see vertical polarity channels and not horizontal. I get no signal reading when scanning.
I am running freeview nz and I have the latest version of GBPVR.
The setups are identical except the second one I setup as device 2.
Both cards are plugged in using a splitter from Dick Smith. If one was faulty or not installed correctly then i dont think I would get anything. I am using an old sky dish. And I have tried seeting with and without power on both cards. No difference.
I have been trying to install my new HDPVR and keep running into the same problem when I go to add the capture source. I get a message that says "The drivers for the device you have configured do not seem to be installed." The device works perfectly with Arcsoft TotalMedia and everything seems fine in windows device hardware. Any ideas? Have attached logs.
Hi, I've been trying to use carpeVideo's excellent GraphRecorder plugin, and have had decent success so far. I got a graph together in graphEdit that works to display video, but I can't get audio. All I get is pulsing static noise. Unsurprisingly, pvx2 can't get audio either (it does get the video successfully, however).
I'm using a Leadtek Winfast tv2000 Expert card, and I'm plugging the composite output from my set-top-box right into the back of the card. There is an audio out that goes from the card to the line-in on the soundcard (well, really into the integrated sound on the motherboard).
My simple, preview graph is attached. I haven't bothered attaching the recording graph because I figure the only difference is encoding and muxing the audio once I can make it work when rendering it.
The audio capture filter is Realtek HD Audio In.
Thanks for any help you can give me. Sorry for my green-ness at graphEdit.
Hello, I have a Twinhan 1020a, been using it with DVDdream and SichboPVR with DN and B3V, I wanted to try GBPVR again but, I can't seem to find an easy guide to setup GBPVR and the EPG for both DN and B3V...is there an easy way? XMLTV?
I cant delete one of my capture sources, it keeps coming back when I go back into config.
I've been monkeying around with a second dual digital tuner and i wanted to get the capture source priority working so I used sqlitespy as per this thread:
I just noticed that I was getting 0-byte recordings this week. Checked the hard drive and it's still got some space left (150+GB) so no idea why it didn't record. Live TV seems to be working okay. Did a couple of short recordings to test (5-KTLA Spiderman, 5-KTLA Chaotic and 11-KTTVDT TMNT).
I'm using a SiliconDust HDHomeRun and both tuners are connected to the same antenna via a Channel Vision splitter. Checking the status with the HDHomeRun Manager shows good signal strength and quality (80+%) and 100% symbol quality while recording.