I recently picked up a HVR-1600 with the remote and i've been looking on how to use the remote with GBPVR for a while now and i cant seem to find anything that works.
I'm running VISTA 64bit
4gb ram
Intel E8400
Nvidia 8800GT
I setup 1.1.5 on a newer PC and when I try to play recordings PVRX2 crashes. I was able to play the file when it was recording. I am also able to play older videos just fine. I have zipped the log files.
I don't know how to fix this. I'm using Zap2xml scraper. All my channels in the EPG are showing no show details now.
I went into each cap source and deleted extraneous channels. I then went back into each cap source and emptied first, then updated the EPG. At some point I went to the channels tab and hit "remove unreferenced channels" and it only left 3 or so extraneous which I left unchecked.
I don't know why the xml file's time stamp was not matching with when I was doing the updating. It looks like it was not being updated which I guess would lead to me seeing all the crap that was there before.
I don't know why the F'n thing went TU in the first place. Ahh, I'm feeling a bit frantic.
I've tried to attach the logs and xml file. I would greatly appreciate any help anyone out there can offer.
I've been using gbpvr for a few months now and never really had much of a problem. It's a great program. I have a plextor 402tvu or whichever that requires the GO7007 recording plugin. I have it set to output mpeg files so that I may use comskip and comclean to get rid of the commercials. I just updated to the newest version as well. Sometimes my files output as avi instead of mpg. I continually look at my setting baffled as to why the file type is wrong. It seems that there might be a difference depending on whether I click record or quick record when I want to record a program. It also outputs all my season long recurring shows as avi too. Anyone have any ideas what the problem is and how to solve it?
I think I've seen the answer, I just can't remember where.
I have a DVD that has a video on both sides, part A and part B. It's one movie, but two parts.
I've got the MPG files okay, but I can't remember how to splice them together.
Also, they're 3.6Gb and 3.9Gbs, so it'll be 7.5Gb total. Should I expect any problems streaming that to an MVP?
Posted by: Anthony - 2008-02-13, 01:31 AM - Forum: Hardware
- No Replies
I have two HVR-1600 digital tuner cards in my computer. While my Samsung plasma TV has zero problems with my Comcast cable connection, the HVR-1600 tuners just refused to lock on to QAM channels reliably. I even went so far as to have the Comcast service tech come out and verify my signals were as good as they could be. I even bought an OnAir GT tuner to rule out the tuners, but it performed even worse. So, after fighting the futility of the cable connection, I decided to switch to over-the-air ATSC stations. According to antennaweb.org all of my stations are 20-22 miles away and in the same general direction (less than 5 degrees between stations).
I first bought a Philips PHDTV1 "Silvor Sensor Classic" desktop antenna, then later bought a Channel Master 4221 to put in my attic so I wouldn't have to stare at the desktop antenna. Unfortunately, while the antenna worked much better than cable, I still had many signal problems. Contrary to most reports I had read, my signal actually improved when we had snow on the roof, but then quickly declined when it melted off. I tried a 10db booster amp, but it had no effect on most channels and actually made other channels worse.
I finally had a day to myself, so I decided to experiment with different antennas and locations to see if I could figure out some way to improve my signal. Using the Hauppauge Signal monitor and the 4221 antenna I had in my attic, I received the following SNR levels:
Today was a particularly bad reception day, and only two of those stations were reliable. Generally anything below 20 ends up unwatchable, and most of my channels were at or occasionally dipped below that level.
So, I disconnected the attic antenna, and tried the Silver Sensor on my office desk:
Ironically, some stations improved while others declined dramatically. This led me to believe the house structure or wiring was somehow interferring with my signals. So, I decided to set the Silver Sensor outside on a chair, just to see if it would behave any differenly:
Bingo! Every channel came in strong with much fewer fluctuations. But, the Silver Sensor is not an outdoor antenna, so I pulled the 4221 out of the attic and set it on the same chair:
Interesting. Not much different than the Silver Sensor, though still far better than I was getting in the attic. So, I decided to experiment with locations outside. The first was on the side of the house, hanging under the eave:
Again, about the same readings. So, it came down to ease of installation. The eave location would have been out of the way, but it would have involved some complicated cable routing. In the end, I decided to mount the antenna at the very peak of the gable end, as this let me drill a single hole through the gable end and tie into the cable I already had run to the attic. After puchasing a mast and gable mounting bracket my final readings were:
The best signal levels I had seen so far, and better yet they're consistant across all channels. KRCW is nearly 7 points higher than I was getting in the attic, and KPDX is an outstanding 13 points higher than I got with the Silver Sensor on my desktop.
Of course, I will be keeping an eye on my signal levels over the coming weeks, as I've had periodic improvements before and am not ready to call this problem solved. But it appears an outside location results in a much better signal than an indoor or attic location (regardless of the antenna used).
Hopefully my experiments will benefit someone else.
Hi
I'm using GBPVR with an Avermedia A16AR PCI card, and my HD recordings seem to stop after about 30 seconds of stuttering videos, while the recording service tries to record the program forever!
Watching and not recording HD works, and both recording and watching SD works, although I can't get CC/Teletext captions to show/capture.
Edit: I can now record HD, and view captions but the captions are not being saved.
Having trouble setting up 2nd DVB-T card.
My current system consists of GB-PVR 1.15 using Pinnacle DVB-T and all works just great (so why not leave it that way says the wife! )
but I am trying to add a second DVB-t card, this one being a Peak DVB-T Digital TV Hybrid PCI which incorporates DVB / Analogue / FM tuners.
My first steps were the normal steps - Config/Capture Sources/Add/Select source as BDA go into settings
At this point I usualy use the "Only show detected devices" however I was surprised to see a whole load of devices :confused: as follows -
Lifeview flyDVB-T
Pinnacle (my old card)
Kworld DVB-t
Ads Tech Cardbus DVB-t
Medion 880 BDA
Asus MyCinema
Confused I thought I would go down the list trying each until I gained success but non of them will work. All available options produce the same result, ie save and return to edit source and click mapp digital channels where I am presented with the "GB-PVR was unable to start the BDA device..."
Digging around the wiki I ventured into creating your own card bda.ini.
Using graphedit I can see receiver components
Pinnacle RoyalTS Capture
713x BDA Digital Capture
and source filters
Pinnacle RoyalTS Tuner
713x BDA DVB-T Tuner
so I created my new bda entry as -
[713x BDA DVBT]
TUNING_TYPE=DVB-T
FILTER_TUNER=713x BDA DVBT Tuner
FILTER_CAPTURE=713x BDA Digital Capture
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport