Sub, I have to say after trying many PVR softwares, I find that GB-PVR is the best. Thanks a million!!
I was just wondering if any progress has been made into speeding up channel changes in timeshift mode. I saw this post http://forums.nextpvr.com/showthread.php?t=13294 but it's over two years old. I had to turn off timshifting because of 10-15 second channel changes.
I have a Hauppage 1600 and I cant get it to find any channels.
also the cable is split before it gets to the cablbe box but it doesnt seem to affect the tv at all so... idk whats going on or what to do.
I did a rescan with win tv and it found two channels so I looked at channel 4, which is one of the channels it found and channel 4 shows what ever channel my digital cable is sitting on. So I can change the channel with my remote and I see it in WinTV changing channels. So my cable works there, but when
I try to scan in config mode to do mapping it doesnt find any channels.
I just did some tweaking on my Guide. I manually added channels and in the guide it shows the channel and the information but when I try to go the watch or live tv it gives me an error: Index was outside the bounds of the array.
Is that because when I scanned I hadnt found any channels?
I actually have two problems, installing the patches from the survival guide and the system not waking from standby to record. I figured I wait on the patches before asking about the record problem.
Anyway, I can download the zip files for the updates just fine, but my XP box says that they're password protected and I can't extract them. What's the password?
*included no logs as there are no crashes
*Only plugin is Weather
*GBPVR 1.1.5
I have just a couple issues that I don't get.
The worst is that I can't record a season. It simply doesn't mark it for recording at all. I can record individual shows just fine.
The other is that Play All doesn't work in GBPVR2 for mp3's. It'll play one song, then stop. It does this for any folder. It works fine in GBPVR (old interface).
I've made a C# exe that can be run at the DOS prompt to insert recordings into the RECORDING_SCHEDULE table by supplying arguments to it ( download link and syntax at bottom of this post )
My problem is that these RECORDING_SCHEDULE rows are only picked up and acted on by the recording service unless either:
a) I stop and restart the service after running my exe ( unsatisfactoy since it may break a recording in progress )
or
b) Any schedules that my exe inserts that are scheduled to follow recordings scheduled via the usual PVR2 GUI *are* picked up after a "GBPVR GUI-inserted" recording starts.
When first proposing this exe, sub suggested I needed to run "PVRX2.exe -OnlyUpdateEPG" after inserting a row, but doing this does not fix the problems described above.
Please, please, please, is it possible that PVRX2.exe could be given a new command line option to force it to re-look at the RECORDING_SCHEDULE table and take notice of any new *externally* inserted rows ?
This would make my exe useful for any number of other apps to be able to integrate with GBPVR i.e. other EPG services, or remote SMS schedulers.
<path to gbpvr db> = the fullpath to where you have installed the gbpvr.db3 file e.g. "c:\program files\devnz\gbpvr\gbpvr.db3"
<prepad mins> = number of pre-padding minutes for this recording e.g. 2
<endpad mins> = number of post-padding minutes for this recording e.g. 10
<channel number> = the number you have assigned the channel you want to record e.g. 4
<programme starttime> = start time of recording in format "YYYY-MM-DD HH:MI" e.g. "2008-02-11 21:30" ( for 9:30pm on Feb 11th 2008 )
All the above arguments are mandatory, the next two are optional and if left out the exe will query the GBPVR EPG data and get the end time and programme name automatically.
[programme endtime] = end time of recording, in the same format as the start time
[recording filename] = The name you want GBPVR to give the recording file e.g. "Manual Recording 3"
If you do specify an endtime and recording filename, the recording event will be entered as a GBPVR "manual recording" , rather than a named programme recording.
-----
Errors:
The exe does not check for typos in arguments, so will crash if given invalid input.
You may see the following errors reported:
Quote:ERROR: Non-manual recording requested, but GBPVR could not find a programme in it's EPG data at that time for the requested channel - try again, but specify an end time and a recording filename to set a manual recording
This means you specified a channel number and start time and expected GBPVR to find the end time and programme name automatically but it could not find EPG data for that channel at that time. You could force a manual recording for the same channel and start time by running the recgbpvr.exe again and adding the end time and recording filename arguments
Quote:ERROR: GBPVR has not been set up for that channel - recording not scheduled
You probably mistyped the channel number!
Quote:ERROR: No free recording source available at that time for that channel - recording not scheduled
All your recording sources that carry the channel you want to record are busy at the time you requested
I am very close to finish automating my GBPVR living room setup. I have GBPVR running from a shell looking spiffy. I have all the EPG, web admin, and automatic comcut and comskip working perfectly. All I have is the standby issue. The computer automatically goes into standby after 5 minutes of inactivity. I would like to be able to wake it up using the remote control but it doesn't look possible so far. It'd be pretty inconvenient reaching into the back of the tube and pressing that flashing button. Can this problem be fixed?
I also have an issue where the TV "monitor" does not get a signal from the computer when it wakes up from standby. Can this problem be fixed too?
ANY information at all about these two issues is much appreciated...
Went to start GBPVR but hit 'Re-register filters' instead (shame they are next to each other in the start menu).
Now Live TV does not work at all. GBPVR reports "Object reference not set to an instance"...or something like that. PVRX2 does not report an error but just goes back to the menu.
Also 'Resume' no longer works on DVD's, and it takes ages for a DVD file to start playing.
So what have I done by re-registering the filters? And how do I fix it?
Pob
So, I've been a long time user of GBPVR as my primary recording device, I thought I'd share a write up on how I have GBPVR setup to allow me to subscribe to my recordings and have them sync automatically to my iPhone for viewing on my daily commute.
I didn't want to use the EWA RSS feeds with enclosures because I only wanted certain shows, not all completed recordings (I have no particular need to watch my wifes episodes of Coronation Street each morning).
I borrowed heavily from this post but used HFS to serve up the files (feeds and recordings).
The software required:
1. HFS
2. XMLerator
3. Script to delete transcoded files when mpeg is deleted (see below)
The configuration:
1. I have GBPVR configured to automatically transcode everything using the iPod video configuration. (This is left over from my first attempt at getting video to my iPod, I could probably use a batch file to transcode only the programs that I would like transcoded, but at this point I haven't bothered, this also has the benefit that if there is a movie or something that I recorded that I want to manually add to iTunes, it's always there the next day.)
2. Since I didn't want to delete the original recordings from my haddrive because of the quality difference, I needed a way to remove the mp4 recordings when the mpegs were deleted either automatically by GBPVR or manualy. So I wrote this script that runs after the EPG update (run from the PostUpdateEPG.bat). It searches through all the folders in my recordings directory and if there is an mp4 file that doesn't have a matching mpg file it deletes it.
Code:
Option Explicit
Dim oFSO
Dim sDirectoryPath
Dim oFolder
Dim subFolders
Dim showFolder
Dim showFile
Dim oFileCollection
Dim oFile
Dim showFullName
Dim showName
Dim showExt
'14
'Customize values here to fit your needs
Set oFSO = CreateObject("Scripting.FileSystemObject")
sDirectoryPath = "e:\recordings"
set oFolder = oFSO.GetFolder(sDirectoryPath)
set subFolders = oFolder.SubFolders
set oFileCollection = oFolder.Files
For each showFolder in subFolders
set oFileCollection = showFolder.Files
For each showFile in oFileCollection
showFullName = showFile.Path
showName = Mid(showFullName,1,len(showFullName)-3)
showExt = Mid(showFullName,len(showFullName)-2,3)
If showExt = "mp4" Then
If Not oFSO.fileExists(showName & "mpg") Then
showFile.delete
End If
End If
Next
Next
'Clean up
Set oFSO = Nothing
Set oFolder = Nothing
Set oFileCollection = Nothing
Set oFile = Nothing
Set sDirectoryPath = Nothing
Set subFolders = Nothing
Set showFolder = Nothing
Set showFile = Nothing
Set showFullName = Nothing
Set showName = Nothing
Set showExt = Nothing
4. Also in PostUpdateEPG.bat I have a line to run XMLerator for each show that I want a podcast generated:
cd E:\Recordings\The Daily Show With Jon Stewart
"c:\Program Files\XMLerator\XMLerator.exe" TheDailyShowWithJonStewart.txt
The contents of TheDailyShowWithJonStewart.txt:
Code:
[GENERAL]
basedirectory=E:\Recordings\The Daily Show With Jon Stewart
rssfilename=TheDailyShowWithJonStewart.xml
linkbasedirectory=E:\
aggregatefiles=true
includesubdirectories=true
[RSS]
Title=The Daily Show With Jon Stewart
Link=http://GBPVRMachine:7650/<DirectoryOffset><RssFileName>
Description=Daily Show Podcast
Category=TV
ItemTitle=
ItemLink=http://GBPVRMachine:7650/<DirectoryOffset><FileNameFull>
[FILEEXT]
mp4=video/mpeg
5. I use HFS to serve up my recordings directory so I can allow iTunes to access the XML file generated in step 4.
6. In iTunes in the menu, select Advanced > Subscribe to Podcast and paste in the URL of the XML file (should be something like http://GBPVRMachine:7650/Recordings/The Daily Show With Jon Stewart/TheDailyShowWithJonStewart.xml).
Where I have GBPVRMachine:7650 you would have to replace with either your GBPVR machines IP address or localhost if you are running everything off one computer and replace 7650 with the port that HFS is using.
Because this will serve up all the mp4 files in the folder and the podcast will contain all of them, I have iTunes set up to keep only the most recent episode so that it will only keep copies of the recordings in the recordings folder.
So using this, each morning when I grab my iPhone, it has the latest episodes of each show that I have a line in PostUpdateEPG.bat for. And I have something to do on my morning commute when I finish the news paper.
I should note that I only have this configured to work within my local network, I don't open the HFS port, but theoretically opening/forwarding that port on your router should allow you to access this out side your local network.
The date carried for EPG info in a DVB broadcast is encoded as a Modified Julian Date. The document I have gives the following formulae to convert to Year, Month and Day components.
Quote:a) To find Y, M, D from MJD
Y' = int [ (MJD - 15 078,2) / 365,25 ]
M' = int { [ MJD - 14 956,1 - int (Y' Ã 365,25) ] / 30,6001 }
D = MJD - 14 956 - int (Y' Ã 365,25) - int (M' Ã 30,6001)
If M' = 14 or M' = 15, then K = 1; else K = 0
Y = Y' + K
M = M' - 1 - K Ã 12
The following is my C# interpretation but my day result is always one day ahead, i.e., today is the 10th but my code is returning D=11.
Code:
int MJD = (start_time[0] * 256) + start_time[1];
int Y1 = Convert.ToInt32((MJD - 15078.2) / 365.25);
int M1 = Convert.ToInt32((MJD - 14956.1 - Convert.ToInt32(Y1 * 365.25)) / 30.6001);
int D = MJD - 14956 - Convert.ToInt32(Y1 * 365.25) - Convert.ToInt32(M1 * 30.6001);
int K = 0;
if ((M1 == 14) || (M1 == 15))
K = 1;
int Y = Y1 + K;
int M = M1 - 1 - (K * 12);