I am using version 0.99.12, with no problems - if I upgrade beyond this version, I lose the 'TV Out' capability.
My graphics card is a Sapphire Radeon X1600 (256mb). I seem to need the VMR 7 setting to allow me to view video on the PC and on the television via TV out.
Is there a 'workaround' which would allow me to upgrade to a newer GBPVR version whilst still maintaining my display capabilities please?
Okay, so I've now got my Hauppauge HVR-1300 card working, and doing some manual recordings on 1 or 2 channels I don't get over DVB-T. I've only configured the analog bit of the tuner so far, and most likely will NOT use the DVB tuner as I've already got two of 'em
My biggest problem is to next setup the channels (Germany UnityMedia cable) and try to get an EPG for some of them.
As I already get EPG data for about 20 of the 35 channels over DVB-T, is there any way I can setup the analog portion of the card to use this data? I need a way to overlap the channel IDs in the database so that I can say that channel x (say RTL) is available on either of my DVB-T tuners, or on the analog Hauppauge.
For the rest of the channels, I will need to get data from an external source. I've got NextView working from the German Kabel 1 feed, and get coverage for most of the rest. I assume I will need to somehow "merge" this data into the database so that I get EPG coverage for the rest of the channels. I assume I can automate NextView harvesting through command line, let it run for an hour or so at night, and then import in the morning into GBPVR somehow.
My question is thus -- can I configure GBPVR so that some of the channels on the tuner share the DVB EPG pool, and other channels are fed from XMLTV?
I have also sent a request to tvtv to see if they offer an EPG download service that I would have to subscribe to -- not much hope here, but it's worth a try.
I'm sure this bug has been reported before, but the "Play All" option in Music Library only plays the first track in a folder.
Would it be possible to add:
- Running Time -versus- Total Track Time (perhaps a progress bar)
- "Queue-It-Up" (I'd imagine a button called "Queue-It-Up" and another page showing the Queue, and the ability to add folders to the queue)
- Repeat mode
I tried to install music library 2, but it looks very complicated and has the honour of the only programme to have ever crashed by GBPVR system. Couldn't get it to work, and I think I prefer the idea of using folders anyway.
I noticed yesterday that my EPG (which is downloaded from the DVB) only went to Monday Night.
I rescanned (on tuner 1 & 4) this afternoon and went to update EPG and it doesn't seem to show any scanning steps.
It goes straight from starting, to saving with no scanng in between.
I'm running from the Sutton Coldfield transmitter.
Anyone have the same problems or suggest a solution.
I get this in the log?
2008-01-05 14:00:57.843 VERBOSE [1] labelAction.Text = Starting scan...
2008-01-05 14:00:57.953 ERROR [4] Unexpected failed in DvbEpgReader.LoadChannels(): System.NullReferenceException: Object reference not set to an instance of an object.
at NativeUtilities.BDARecorder.RenderToDVRMSMux(Int32 videoPID, Int32 audioPID, IBaseFilter* demuxFilter, Char* pszFilename)
at NativeUtilities.BDARecorder.StartRecording(String cardType, Int32 board, String filename, IntPtr hwnd, ChannelTuning channelTuning, Int32 lnbLOF1, Int32 lnbSwitch, Int32 lnbLOF2, Int32 diseqc, Boolean powered, Boolean previewMode)
at NativeUtilities.BDARecorder.StartRecording(String cardType, Int32 board, String filename, IntPtr hwnd, ChannelTuning channelTuning, Int32 lnbLOF1, Int32 lnbSwitch, Int32 lnbLOF2, Int32 diseqc, Boolean powered)
at GBPVR.Backend.Common.DvbEpgReader.LoadChannels(IEpgUpdateProgressCallback callback)
2008-01-05 14:00:58.187 VERBOSE [4] DVB EPG scanning complete
I have this remote that came with the computer, and not an MCE remote but works almost like one. I think it's a cyberlink remote, though it's called something else. Anyways, I've selected Default under DVD/Remote, installed EventGhost and used that xml file for the MCE remote but changed the buttons to correspond with my remote. So, when I used my remote to open pvrx2, I thought I was good to go,
But, it didn't work. After some playing around I found out that my remote doesn't work because the keyboard shortcuts doesn't work for pvrx2 either. Well, it works on some shortcuts but not all. Like Ctrl P doesn't play a song or a video. Ctrl S works to stop it, but not Ctrl X to increase volume.
Am I missing something? When I use EventGhost and keyboard shortcuts in Gb-pvr, it works just fine, but not with pvrx2.
In reading through the forum it seems there are a number of people who can not get the play all to work through MVP. I too have this issue. I seem to have the same issue with playlists (m3u). In both cases the first song will play and then nothing else. I just wondered if anyone had been able to overcome this issue. If there is an answer that i havnt found i would certainly appreciate some help with this. I am using MVPMC and the date of the dongle is 2007-12-28. I am also trying slimserver with MVPMC for my music but it seems config has me a bit confused (like thats hard to do). But that is for another forum if i can find one for it. Thanks in advance for all the help.
Im looking for one of those USB DVB-T tuners to watch free DVB-T channels.
Is the "Hauppauge WinTV-NOVA-T-STICK DVB-T tuner" good enough and ofcourse, will it work in GB-PVR?
The "noname" incorporated in my laptop makes a good job also when recording, but it doesn't work in GB-PVR.
Any suggestions are welcome and it must work fine in GB-PVR.
Thanks.
Edit: forgot, whats the difference between the Hauppauge WinTV-NOVA-T-STICK DVB-T tuner and the "lite" one of same??
I have the latest skin plugin and community skin 3 installed and when I enter the skin menu and change the background to another one that is nclided in the community skins nothing happens after retsrt of gbpvr and i'm stuck with the basic blue background or mce or ....
is this a known bug or em I the only one?
I have delated all contents in my skins skin2 and plugin skintool diectory and re-insalled community 3 and skintool and same problem.
