Just 2 small inconveniences with the "Channels" setting page and the channel editor (the place you go to manually map to alternate epg source) on the web app.
1. On the channel setting page when making custom groups. You can make your group called whatever you want for example "All Sports". Then go to the search/filter bar and type in "Sports" and only channels with the word sports in the name will show up. There is a check box there to select all. When clicked, it looks like it works. There are now checks next to all sports channels. But then as soon as you click any where or delete the text the changes revert and have not been saved. Meaning you actually have to individually click each checkbox.
2. On the channel editor (after clicking on the little wrench). I have a schedules direct line-up added. I select it from the "source" dropdown list. Then click on the "mapping" drop down list. It gives me a very short period of time to look for the proper channel before something happens and the list changes to whatever the source was before.
I have reproduced this issue on both Firefox and Chrome. Not complaining. Just some small things I thought you might like to be aware of to get the kinks out. Or if anyone has ran into these issues before could give me a workaround.
With V4 I used a program called ccextractorwin to develop srt closed captions. I now gather that unfortunately with v5, the recordings are stored online and I cannot see an easy way to process them. Is there a way to get srt closed captions. I tried downloading the show but was told that that is not available. Even if I were to make the srt files, where would I put them?
I did a test recording where 36 minutes of recording was saved but NextPVR thinks the duration is 33 minutes. An EPG update was performed in the middle of the recording, and I am wondering if that reset the recorded start_time from (program start time - the 3 minute pre-pad) to (program start time)?
I am using: Ubuntu 20.10, NextPVR 5.1.1.210329
I am attaching a .zip file that includes the log files, and images showing Kodi and NextPVR both think a 36 minute recording is 33 minutes.
I did 6x 30 minute show test recordings overnight. I used 3 minute pre and post padding, so I expected 6x 36 minute recordings. One of the recordings ending up being "33 minutes". I say "33 minutes" because it appears that 36 minutes was recorded, but NextPVR (see 33_minute_recording.png) and Kodi (see kodi_33_minute_recording.png) "think" it was 33 minutes. Kodi lets me watch all 36 minutes , but I can't skip forwards and backwards in the last 3 minutes. The NextPVR browser player won't let me watch the last 3 minutes.
It turns out that an EPG update was done in the middle of the recording (see "2021-04-18 02:44:38.834 [DEBUG][10] Update EPG..." in nrecord.log.1):
2021-04-18 02:44:31.665 [DEBUG][54] Have received 293856220 bytes from rtp source
2021-04-18 02:44:38.834 [DEBUG][10] Update EPG...
2021-04-18 02:44:38.845 [INFO][55] About to update EPG
2021-04-18 02:44:38.910 [DEBUG][55] No /var/opt/nextpvr/scripts/UpdateEPG.sh file found
I am wondering if the EPG update is what corrupted the recording? When playing back the recordings I notice in record.log.1 that the recordings that worked show the correct start time including the pre-pad, example (11:57:00 = program start @ 12:00:00 - 3 minute pre-pad):
2021-04-18 08:33:51.717 [DEBUG][50] <?xml version="1.0" encoding="utf-8" ?>
<rsp stat="ok">
<recordings>
<recording>
<id>851</id>
<recurring_parent>0</recurring_parent>
<name>Modern Family</name>
<desc>A series of crises on Mitch and Cam's wedding day put Pepper to the test; Phil gets an eye procedure before the celebration; Claire embraces the role of best woman.</desc>
<subtitle>S05E23 - The Wedding, Part 1</subtitle>
<start_time>4/17/2021 11:57:00 PM</start_time>
<start_time_ticks>1618729020</start_time_ticks>
<duration>00:36</duration>
The failed recording in nrecord.log.1 doesn't, example (2:30:00 recording start_time, expected 2:27:00):
2021-04-18 08:59:46.056 [DEBUG][63] <?xml version="1.0" encoding="utf-8" ?>
<rsp stat="ok">
<recordings>
<recording>
<id>853</id>
<recurring_parent>0</recurring_parent>
<name>Hazel</name>
<desc>Hazel uses her wits to delay a decision at a gangster meeting.</desc>
<subtitle>S03E19 - Scheherazade and Her Frying Pan</subtitle>
<start_time>4/18/2021 2:30:00 AM</start_time>
<start_time_ticks>1618738200</start_time_ticks>
<duration>00:33</duration>
From within Kodi I had scheduled the recording of the F1 race. I saw the message on the screen saying "recording completed" (about 3 hours later) at the appropriate time. So I attempted to watch it. After approximately 22 minutes the recording must have failed because the video stopped. The length is only 22 minutes long even when played in VLC and Nextpvr Desktop. Admittedly I have only been using this to watch tv for a short time but I haven't had issues with streams being interrupted. But there do seem to be issues with watching current recordings and watching completed recordings though. I'm wondering if I have bad settings for transcoder / decoder / chunk sizes / other... Is there a way to record in another file format? ... Just had another thought that it could it be my computer going to sleep after 20 minutes. But it's a desktop HTPC and is set to Never sleep.
Also, curious about the "Live TV method" in Kodi... If I apply the trasncoded method and allow timeshift, some channels allow me to pause live tv and others do not. The pause button simply isn't present. But with straight timeshift pausing always works... Resuming from paused is a little sketchy though.
Moved over from TVheadend last week mainly for use with my IPTV supplier using the nextPVR addon for KODI 19.
Im amazed how is it is to setup after using TVHeadend for a couple of years i kinda got used to how complicated it is to get setup ( xmltv epg really needs some work on TVHeadend )
The only thing i cant see to do, is rename and remove channel groups. Currently im doing it via x-tream editor and then importing the resulting playlists into nextPVR, but id like to remove the 'middle man' and edit the groups in nextPVR.
Often I record a movie without realizing it's already been recorded some time ago. It would be helpful to have some indication on the guide that the show/movie is already in my library. Maybe a checkmark or "rec" where the "new" indicator is?
Or when I choose to record a movie, I get a warning...
I have NextPVR running on my 2015 MBP and also a Windows 10 computer.
Has been working flawlessly on both.
However, on my MBP, I can not longer get the EPG which is an XML file that it retrieves from a server. Works fine on Windows, but on my MBP, I keep getting a 404 error. I have several sources for the EPG, all work find on Windows but on my MBP, they all return the same 404 error with no EPG updated.
I am using the latest NextPVR software, MBP is the last release prior to Big Sur. Like I said, worked fine until just recently and I have made no changes to my MBP other than any updates that Apple might have pushed out.
Ideas?
hey yall first post here but i recently tried to install ntpvr on my w10 machine and its hanging at "installing pvr service" ive tried uninstalling removing folders and all the stuff suggested in similar threads ive found but no luck yet. It installs fine on my other machines in the house. I am running the install as an admin im not sure whats going wrong exactly.
Code:
2021-04-17 16:26:28.674 [DEBUG][12] wwwroot/vendor/test.html
2021-04-17 16:26:28.675 [DEBUG][12] wwwroot/vendor/vue/vue.min.js
2021-04-17 16:26:28.677 [DEBUG][12] wwwroot/video.png
2021-04-17 16:26:28.678 [DEBUG][12] Unzip complete
2021-04-17 16:26:28.678 [DEBUG][12] Installing NextPVR Service
2021-04-17 16:26:28.704 [DEBUG][13] output>>
2021-04-17 16:26:28.704 [DEBUG][13] output>>D:\Downloads>echo OFF
2021-04-17 16:26:28.712 [DEBUG][13] output>>######## ######## ######## ####### ########
2021-04-17 16:26:28.712 [DEBUG][13] output>>## ## ## ## ## ## ## ## ##
2021-04-17 16:26:28.712 [DEBUG][13] output>>## ## ## ## ## ## ## ## ##
2021-04-17 16:26:28.712 [DEBUG][13] output>>###### ######## ######## ## ## ########
2021-04-17 16:26:28.712 [DEBUG][13] output>>## ## ## ## ## ## ## ## ##
2021-04-17 16:26:28.712 [DEBUG][13] output>>## ## ## ## ## ## ## ## ##
2021-04-17 16:26:28.712 [DEBUG][13] output>>######## ## ## ## ## ####### ## ##
2021-04-17 16:26:28.712 [DEBUG][13] output>>
2021-04-17 16:26:28.712 [DEBUG][13] output>>
2021-04-17 16:26:28.712 [DEBUG][13] output>>####### ERROR: ADMINISTRATOR PRIVILEGES REQUIRED #########
2021-04-17 16:26:28.712 [DEBUG][13] output>>This script must be run as administrator to work properly!
2021-04-17 16:26:28.712 [DEBUG][13] output>>If you're seeing this after clicking on a start menu icon,
2021-04-17 16:26:28.712 [DEBUG][13] output>>then right click on the shortcut and select "Run As Administrator".
2021-04-17 16:26:28.712 [DEBUG][13] output>>##########################################################
2021-04-17 16:26:28.712 [DEBUG][13] output>>
