Hello all.

I got my AVerMedia M780 set up with GBPVR for NTSC and ATSC the other day. Works great! I'd like to get the QAM channels working though, and avoid OTA if possible.

First issue I'm having - I don't know which input is for QAM! The instruction manual doesn't mention QAM, so I don't know which input I should be trying to use.

Second issue I'm having - I can't find any QAM channels on either input.

I followed the directions in the following post to update my bda.ini (didn't have to change anything) and qam.ini file (did update the entries it mentioned).
http://forums.nextpvr.com/showthread.php?t=28343

I then did a scan but found no channels, on either input.

To make sure I should be getting something I looked around and found the post below mentioning the QAM channels that are available in my area.
http://forums.sagetv.com/forums/showthre...stcount=29

Any input would be greatly appreciated! I'm pretty happy that I'll finally be able to take back my Comcast DVR pretty soon!

It's easy to test.
Set primary monitor resolution to 1600x1200 or lower and GB-PVR starts up on the secondary monitor just fine as it should. Change primary monitor resolution to anything higher like 1920x1200 and GB-PVR starts up on the primary monitor which it shouldn't.

This was tested on two completely different computers - both my old AMD/ATI and new Intel/NVIDIA computers with the same results.

Using renderers Overlay Manager, VMR7, VMR9 made no difference.
Switching cables on DVI connectors made no difference.
Secondary monitor is to the right (as it should) of primary as defined in Display Properties|Settings
WinXP SP2, DirectX 9.0c, GB-PVR 1.0.16 on both

Any workaround for this?

here is one

is it possible to make it so rectracker will not unschedule a show if I choose a recording using "quick record" or by pressing the record button in the guide.

many times I say "that was a good episode" and set it to record, only to see it was purged later.

It's looking like Zap2it is still keeping scheduling for upto the end of the month at least. (as of this post.. 15 days)

so how far do you guys and gals tell GBPVR to get data for? a few days - a few weeks.
is there a disadvantage for getting two 1/2 weeks ahead?

Nothing on my System or anything has been changed but tonight I can't get any channels listings in the TV Guide, I reload the EPG multiple times and still no change, I've restated the PVR, no luck.... Is it SD or Me?

Many of the new HTPC motherboards have only 2 pci slots. It would be great to be able to seamlessly schedule and use tuners in more than one PC so you could use more tuners in the system. (the main and a client?) or....

I'm Using GB-PVR V1.0.16 & Schedulesdirect.com with multiple lineups.
I've emptied the EPG and deleted all channels.
When I update using the "username;DITV623%3A-" It appears to be collecting data... requesting, parsing, saving, etc.
Once it completes however, the channels list box is still completely empty in config and there is no EPG data visible in the TV guide.

When I remove the lineup reference from the login name it does populate the channels list in config and TV guide with both line ups. :eek: I have two sources connected to individual GBPVR boxes at my house and do not want to mix the guide data.

I've attached logs in debug mode from both methods as:
Failed.config.exe.log.txt
Worked.config.exe.log.txt

The only thing I see missing from the failed logs are "inserting channel" references.

I found one reference to this problem at the following URL referencing initial update:
http://snipurl.com/1qsoz

Thanks

I'm trying to setup a v1.0.16 client in a WinXP SP2 Virtual Machine. I installed .Net 2.0 and then 1.0.16, but it fails at the same point every time:

Installer Information:

Error 1904.Module c:\program files\devnz\gbpvr\PsiParser.ax failed to register. HRESULT -2147010895. Contact your support personnel.

...so that's what I'm doing. ;-)

I tried "ignore", but got more errors when it launched the configuration.

Any ideas?

-Brad

Martin, I now have Vista going to sleep properly but there is a problem with mvpmc waking it up. I seem to need to soft power toggle the mvp to get a WOL sent. The WOL will wake it and pvrx2 comes up fine. If I then put Vista into sleep mode the mvp continues to show the pvrx2 menu but there is no response from key presses. The mvp registers the keys (light flashes) but nothing happens.

As an aside, this behaviour seems to have changed after loading the latest alpha. Previously, if Vista was asleep, I got a loop - loaded and setup mvpmc, showed correct IP# of my server, said "Pinging", went back to start of loop.

NB I am using the latest alpha. I don't power my mvp off in normal operation.

Do I need to pwr toggle my mvp every time?

Hi, I recently upgraded to Vista and ever since haven't been able to get my MVP working again. I recently got GBPVR working well on the PC itself, by using the Nero Video decoder and the ffdshow audio decoder.

I have the GBPVR config set to autostart 1 MVP server, and I am using dongle2.bin. When I start the MVP, it loads a graphic in the middle of the screen that says mvpmc.org. That's it, it hangs there and nothing I do has any effect except doing a power cycle of the MVP unit.

I definitely haven't downloaded anything from the mvpmc.org site and installed it, so I can't figure out what's happening here. Can anyone give me some advice? Thanks.