The attached video-clip is the recording of what appears on the PC monitor (in the clip the shift between video and audio is due only to technical causes of recording and does not affect the substance of the problem exposed).

To help understand it, I list what happens:
- I am tuned to channel 1 and everything is OK.
- I set the tuning on ch.501, and here the video is blocked: trying various solutions, I have found that clicking on "Live TV" the video gets restored.
- by clicking now on "channel +" it is OK for ch.502 and then for ch.503 …
  ... but then on ch.504 and 505 and 506 there is no audio and a message appears;
  still looking for solutions I found that clicking on "Audio stream" and then on "ita" the audio gets restored.
  The message says "You don't have a MPEG1 decoder selected" but all decoders are just selected (as highlighted in the clip)!
- going now to ch.507 is instead OK.

What is it happening?


Attached ZIP with log and video-clip.

I still can't get my PCH A110 to access the mvpmc shared folder on Windoze 10 Pro (build 1909).  I'm pulling my hair out on this one.  I have been using my NMTs for 9+ years on my Win7 NextPVR installation, although as I recall I had a battle getting that share to work originally as well.

Notes:
My NMTs can and do work with NextPVR on my dying Windohs 7 Pro PC. 
I have the latest v4.2.5 installed on both the dying Win7 and new Win10 machines.
I do have Kodi v18.6 and knewc add-on working with both the new and old PCs (Win7 and Win10 machines).

I've tried dozens of combinations of settings, I've lost track.

I have tried the procedures in these links:
https://www.howtogeek.com/126214/how-to-...windows-8/
https://answers.microsoft.com/en-us/wind...78f679e428
http://files.syabas.com/popcornhour/down...ssword.pdf

I tried with firewall turned off.  I tried using REGEDIT to create a DWORD value called 'AllowInsecureGuestAuth' in HKLM\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters and set this new value to 1.
I've tried the Guest account and with user/password.  40/56 and 128bit encryption.  Media sharing enabled and disabled.  Public network access on and off.

After running up and down the stairs enough times to make a fitness instructor jealous, I finally moved a PCH into my office next to the Win10 box.
Here's the results of NMTcheck on that PCH from the Win10 machine:


Checking for mvpmc share on BIVO-2020
mvpmc        C:\mvpmc                        Automatic caching of programs and documents

Checking GB-PVR.html links
C:\mvpmc                        Automatic caching of programs and documents\GB-PVR.html not found

NMT IP Address: 192.168.0.83  MAC 0006DC429B03

GB-PVR Not Installed

N-PVR Installed C:\Users\Public\NPVR
config.xml entry found Client Type PCH2
MVPClientType PCH2
MVPWidth 1256
MVPHeight 708
MVPOffsetX 24
MVPOffsetY 12
MVPSendIncrementalUpdates true

Enabled true
Port 8866

The remote server returned an error: (404) Not Found.

Checking NMT Version
01-17-110314-15-POP-403-000

Checking NMT Display
720p 60Hz

Calling NMT Source
HPP7-1080T-BIVO:mvpmc
smb://HPP7-1080T-BIVO/mvpmc Username:  Password Length: 0

HPP7-1080T-BIVO:Movies
smb://HPP7-1080T-BIVO/Movies Username:  Password Length: 0

BIVO-2020:mvpmc
smb://BIVO-2020/mvpmc Username:  Password Length: 0

Does V5 have a screen saver?  My system used to go to a NextPVR logo wandering around on a black screen if left at a menu screen for a few minutes.  It hasn't kicked in since I moved over to V5.

Hello everyone,

I'm new and this is my first post. I tried to schedule a recording that started late in the day and went past midnight until about 1:30 a.m. the next day.

I received an error message that rejected the schedule on the basis that it was more than one day (not a direct quote of the error message). I thought such a schedule would be common.

Have I missed something? Can this be done? Can I schedule a recording that runs over to the next morning? If so, can someone please tell me what I need to do to make it work?

Thank you.

Regards,
Noggle

Is there a way to disable the XML meta data for recordings, and to have all recordings in one folder instead of being filed to individual folders?

For example, all .TS recordings in one destination folder, no subfolders, no XML files. All I need are the video recordings.

Hello, 
I have just recently set up a Open Media Vault NAS and I am having trouble trying to figure out how to install the docker.

I tried using stacks in Portainer but I am getting this error. "Deployment error unsupported compose file version 1.0"

This was my attempt.

nextpvr:
    image: nextpvr/nextpvr_amd64table
    container_name: nextpvr
    network_mode: host
    environment:
      - PUID=998
      - PGID=100
      - TZ=America/Los_Angeles
volumes:
    -/srv/dev-disk-by-label-Media/one/nextpvr/config:/config \
    -/srv/dev-disk-by-label-Media/one/nextpvr/videos:/recordings \
    -/srv/dev-disk-by-label-Media/one/nextpvr/buffer:/buffer \ 
ports:
  - "8866:8866"
restart: unless-stopped 


I am totally lost on how to deploy the docker container and I have no clue how to install it as I am brand new to all of this,
my aging brain is probably not helping. I can pull the docker image and it shows up in my images but I don't know how to configure it.


Thanks.

OK, I got rid of the compose file version error by adding a version: "3" line at the top and now get a new error "volumes must be a mapping" I thought that was what I was doing with
volumes:
    -/srv/dev-disk-by-label-Media/one/nextpvr/config:/config \
    -/srv/dev-disk-by-label-Media/one/nextpvr/videos:/recordings \
    -/srv/dev-disk-by-label-Media/one/nextpvr/buffer:/buffer \

which are shared folders I setup and the absolute path.

I tried using putty with the 
docker run -d \
    --volume /srv/dev-disk-by-label-Media/one/nextpvr/config:/config \               
    --volume /srv/dev-disk-by-label-Media/one/nextpvr/videos:/recordings \
    --volume /srv/dev-disk-by-label-Media/one/nextpvr/buffer:/buffer \
    --publish 8866:8866 \
    nextpvr/nextpvr_amd64:latest

and get "docker: invalid reference format."

Has anyone had any success in getting NextPVR to record NASA TV with an m3u/m3u8 IPTV list? (I hope I said that right. I kinda new with IPTV.)

Hi,
Quick question... is there an easy way to pick the epg big file made by nextpvr and export either to xml or txt?
If yes, instructions please.
Thx.

Getting a silly issue, not sure why

- http://127.0.0.1:8866 works
- http://192.168.178.230:8866/index.html works- and all other pages when full url given
- http://192.168.178.230:8866 doesn't work- 404 error

Had similar little niggles with first page not coming up before/ after login on a few different machines as I've been testing- they always work after I get first page and full page is given.

Any suggestions?

Hi all.
This may not be an NPVR issue, but I thought I'd post it in here to rule this out first before going to Kodi etc...

I was watching Destination America and the picture froze about 15:12 I think, and then it looks like Kodi quit about 15:15
I'm guessing this isn't a NPVR issue?

Have included the Kodi log in with the NPVR logs

Attached Files

  logs-20200530-1518.zip (Size: 518.94 KB / Downloads: 2)