The Recording Service seems to work fine BUT:
GB-PVR itself does not (with v2.0 installed only - so I re-installed v1.1 again to get GB-PVR working again but now with v2.0 released I would say that this should get fixed...), I got that error in the log file:
29.10.2005 19:32:04.966 VERBOSE [1] installDirectory is C:\Programme\GB-PVR\
29.10.2005 19:32:04.966 VERBOSE [1] configurationFile is config.xml
29.10.2005 19:32:04.986 VERBOSE [1] getValue() loading new key/value into cache: /settings/DatabaseConnectionString
29.10.2005 19:32:04.986 VERBOSE [1] getValue: /settings/DatabaseConnectionString : Provider=Microsoft.Jet.OLEDB.4.0;Data Source=".\gbpvr.mdb";User Id=admin;Password=
29.10.2005 19:32:04.986 VERBOSE [1] databaseConnectionString is Provider=Microsoft.Jet.OLEDB.4.0;Data Source="C:\Programme\GB-PVR\\gbpvr.mdb";User Id=admin;Password=
29.10.2005 19:32:04.986 VERBOSE [1] getValue() loading new key/value into cache: /settings/DontAntiAlias
29.10.2005 19:32:04.986 VERBOSE [1] getValue: /settings/DontAntiAlias : false
29.10.2005 19:32:04.986 VERBOSE [1] getValue() loading new key/value into cache: /settings/LoggingLevel
29.10.2005 19:32:04.986 VERBOSE [1] getValue: /settings/LoggingLevel : Info
29.10.2005 19:32:05.076 INFO [1] Starting
29.10.2005 19:32:05.317 ERROR [1] The signature is incorrect.
29.10.2005 19:32:05.327 ERROR [1] at System.ModuleHandle.ResolveMethod(Int32 methodToken, RuntimeTypeHandle* typeInstArgs, Int32 typeInstCount, RuntimeTypeHandle* methodInstArgs, Int32 methodInstCount)
at System.ModuleHandle.ResolveMethodHandle(Int32 methodToken, RuntimeTypeHandle[] typeInstantiationContext, RuntimeTypeHandle[] methodInstantiationContext)
at System.ModuleHandle.ResolveMethodHandle(Int32 methodToken)
at System.RuntimeType.GetMethodBase(ModuleHandle scope, Int32 typeMetadataToken)
at System.RuntimeType.GetMethodBase(Module scope, Int32 typeMetadataToken)
at System.Reflection.CustomAttributeData..ctor(Module scope, CustomAttributeRecord caRecord)
at System.Reflection.CustomAttributeData.GetCustomAttributes(Module module, Int32 tkTarget)
at System.Reflection.CustomAttributeData.GetCustomAttributes(Assembly target)
at System.Resources.ResourceManager.GetNeutralResourcesLanguage(Assembly a, UltimateResourceFallbackLocation& fallbackLocation)
at System.Resources.ResourceManager.InternalGetResourceSet(CultureInfo culture, Boolean createIfNotExists, Boolean tryParents)
at System.Resources.ResourceManager.GetObject(String name, CultureInfo culture, Boolean wrapUnmanagedMemStream)
at System.Resources.ResourceManager.GetObject(String name)
at xae10db17d26ba033.xbb1566157f5f8b1f.xba6706297944b6d3()
at xae10db17d26ba033.xbb1566157f5f8b1f..ctor(String x2b67e84843b345a4, Boolean x16a8bfd49ea44853)
at xae10db17d26ba033.xbb1566157f5f8b1f.xfb409e85bd292293(String[] xf18a926310372520)
This has happened twice in the past couple of weeks. All of my channels are three digit and are sent from a USB-UIRT to a Sky Digital box.
It would appear that gbpvr is sending 1115 rather than 115, this then switches the Sky box to the wrong channel.
In the USB-UIRT channel changer dialog I have tried:
1. All checkboxes unticked
2. Checkbox 1 and checkbox 3 ticked.
Both have resulted in this occasional problem.
I'm not using the most recent release of gbpvr. Can someone please tell me if this problem has been known to occur with older releases and whether it has been fixed?
It may not be a gbpvr issue but on both occasions it has occured when trying to switch to channel 115. Other recordings on 115 have been successful so I'm not quite sure why. Both may have been back to back recordings with something else - I'm not certain about that though.
See the latest posts in the sticky thread at the top of this forum, regarding poor MPEG playback performance. It seems Microsoft acknowledges the playback problems and publicly released a fix along with a recent security update. You may have upgraded your system without knowing it, like I did.
For me at least on Windows 2000, the problem with directx 9.0c's quartz.dll does seem to be solved. If you experienced the trouble yourself, rolling back to 9.0b's quartz.dll fixed your trouble, and you test out the latest update, please consider posting your findings here. Others will probably be reluctant to update until they get more confirmed success, and if it doesn't work for you, people will want to know.
Sub, thanks for mentioning the Cyberlink registry settings in this thread. As much time as I spend on these boards and tweaking my installation, I don't know how I missed this. I wondered why the mini-guide didn't work for me. I have a question though.
Do I understand correctly that even if you have enabled VMR 9 in config, without this reg setting the Cyberlink decoders were switching to Overlay mode?
Personally, I found adding the hardware setting, UIUseHVA, and the EnableVMR setting helped quite a bit (I think it's just the UIUseHVA that made the difference), but when I used EnableVMR9, playback suffered tremendously. I guess that means my system doesn't have enough horsepower for VMR9?
Looking at the wiki for some more information about VMR I noticed another tidbit I'd missed. It says that neither VMR 7 or 9 are supported in Windows 2k... but this isn't right, is it? If so, then why does the EnableVMR9 setting have any impact on my system if all my system can do is Overlay anyway? Assuming the wiki is inaccurate, and I've found other info on the web that contradicts it, without the EnableVMR9 setting, but with EnableVMR does that mean my system is really using VMR7? And if so, besides the Mini-guide is there anything I'm losing between VMR7 and VMR9?
I'd be happy to update the wiki page to explain differences between the two in GB-PVR, but I'd have to know what they are first.
Sometimes, and moreso lately, gb-pvr just forgets to record my shows. If I update the EPG or schedule another recording, it magically remembers my previous requests and begins recording (if something had been previously scheduled at that time).
This behavior began after upgrading to the version with the built in divx encoding. Now besides the fact that no matter what codec I choose nothing happens to my files once they are complete (no conversion). I'm running 0.94.13
Hey I've got an error when I try and retreive infor on films I have on the HDD
here's the error can any one help. It was working a couple of weeks ago.
I do the search and it finds the infomation, I select the correct film and it eith returns to My video's with nothing done or gives the error below
29/10/2005 10:30:43 p.m..734 VERBOSE [2] strURL = http://www.imdb.com/find?q=Dr. Seuss The Cat In The Hat;tt=on;mx=20
29/10/2005 10:30:47 p.m..062 VERBOSE [2] No key mapping found for: LBUTTON
29/10/2005 10:30:47 p.m..062 VERBOSE [2] No key mapping found for: LBUTTON
29/10/2005 10:30:48 p.m..140 VERBOSE [2] No key mapping found for: LBUTTON
29/10/2005 10:30:48 p.m..140 VERBOSE [2] No key mapping found for: LBUTTON
29/10/2005 10:30:49 p.m..265 VERBOSE [2] No key mapping found for: LBUTTON
29/10/2005 10:30:49 p.m..265 VERBOSE [2] No key mapping found for: LBUTTON
29/10/2005 10:30:53 p.m..625 VERBOSE [2] short date = 9/05/1953
29/10/2005 10:30:55 p.m..375 VERBOSE [2] short date = 26/06/1970
29/10/2005 10:30:56 p.m..984 ERROR [2] Error: msg=0x100 (WM_KEYDOWN) hwnd=0x1a02b4 wparam=0xd lparam=0x1c0001 result=0x0 : System.NullReferenceException: Object reference not set to an instance of an object.
at MyVideosPlugin.Database.Database.UpdateActors(ActorInfo actor)
at MyVideosPlugin.Database.Database.AddActorToDatabase(ActorInfo actor)
at MyVideosPlugin.ActorInfo..ctor(String url, String name)
at MyVideosPlugin.InfoLookup.IMDBScraper.FindCast()
at MyVideosPlugin.IMDBResults.IMDB()
at MyVideosPlugin.IMDBResults.Enter()
at MyVideosPlugin.MyVideosTask.OnKeyDown(KeyEventArgs e)
at xae10db17d26ba033.x86396f56243de9fb.OnKeyDown(KeyEventArgs xc4f45905cb1fc7ba)
at xae10db17d26ba033.xbb1566157f5f8b1f.xdae9991ab918b397(Object xdf2e3583f942db7b, KeyEventArgs xc4f45905cb1fc7ba)
at System.Windows.Forms.Control.OnKeyDown(KeyEventArgs e)
at System.Windows.Forms.Control.ProcessKeyEventArgs(Message& m)
at System.Windows.Forms.Control.ProcessKeyMessage(Message& m)
at System.Windows.Forms.Control.WmKeyChar(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at xae10db17d26ba033.xbb1566157f5f8b1f.WndProc(Message& x5f8f2c40c000ab2c)
29/10/2005 10:30:57 p.m..281 VERBOSE [2] No key mapping found for: LBUTTON
I've just changed from the Hauppauge Remote receiver to using the USB-UIRT receiver.
Is there any what of teaching the USB-UIRT 2 remote controls, say my Hauppauge one (the one it has currently learnt) and save another one, such as my Yamaha receiver one. So I can use either remote to control GBPVR??
What can prevent the on screen display from working? I can't seem to get any OSD functions to appear such as miniguide. What other tests can I run? Is it a codec issue? Clicked on a wrong button in config? Is it a video card limitation?
I've been playing with many PVR apps over the past 3-4 months. Is my system just messed up from all the apps? I was thinking of formating and starting over.
See components in signature. I use Cyberlink PowerDVD5 for mpeg2 decoding.
