I've missed several season recordings this week, but with no error that I can find. While a couple did work, I missed Survivor, Lost and Invasion, all new episodes. The programs still show in my reoccuring recordings list, and the EPG updates have succeeded.
Since the recording service log doesn't show the date but instead just the time, I'm having a hard telling exactly what entries might go with the shows I missed, but as best I can tell, the system didn't even try to record Lost, Invasion and Survivor. For your reference, Lost and Invasion are on channel 4 at 9:00 pm and 10:00 pm, while Survivor is on channel 5 at 8:00 pm. In the log there's are two recordings early in the log on channel 26 where done on Tuesday. The last is CSI being recorded at 9:00pm on channel 5 Thursday which was a one-time recording I selected in the guide after Survivor was over.
Code:
12:30:01.483 INFO Log started
12:30:01.483 VERBOSE ConexantRecorder::StartRecording(1, 1, 26, 0)
12:30:01.513 VERBOSE Capture Device is based on BlackBird architecture
12:30:01.513 VERBOSE Capture Device is using Conexant (derived) drivers
12:30:01.513 VERBOSE Loading filter names
12:30:01.513 VERBOSE Found names:
12:30:01.513 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
12:30:01.513 VERBOSE Hauppauge WinTV PVR PCI II Capture
12:30:01.513 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
12:30:01.513 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
12:30:01.814 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
12:30:02.184 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
12:30:02.204 VERBOSE Looking for encoder filter
12:30:02.234 VERBOSE - Hauppauge WinTV PVR PCI II Encoder
12:30:02.244 VERBOSE GetMedium(pCapturePin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000
12:30:02.244 VERBOSE getSetting(AutoDetectEncoderMethod)
12:30:02.334 VERBOSE About try all encoders until we find one that works...
12:30:02.334 VERBOSE Hauppauge WinTV PVR PCI II Encoder
12:30:02.354 VERBOSE Encoder.GetMedium(p656Pin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000
12:30:02.354 VERBOSE Pin mediums match...
12:30:02.374 VERBOSE using instance: 1
12:30:02.464 VERBOSE put_Mode(AMTUNER_MODE_TV)
12:30:02.464 VERBOSE put_CountryCode(1)
12:30:02.464 VERBOSE put_TuningSpace(1)
12:30:02.464 VERBOSE put_InputType(0, 0)
12:30:02.464 VERBOSE put_ConnectInput(0)
12:30:02.464 VERBOSE put_Channel(26, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
12:30:02.635 VERBOSE get_VideoFrequency() returns 235250000
12:30:02.635 VERBOSE get_CountryCode() returns 1
12:30:02.635 VERBOSE About to query available formats
12:30:02.645 VERBOSE ConexantRecorder::SetConfigurationECP()
12:30:02.655 INFO Firmware Version 2.5.32
Audio Firmware Version <<can't read now>>
Model 26032 Rev C182
Serial No: 2964406
Tuner[1]: Model 82 (LG TAPC_H791F)
Decoder: 28
AudioIC: 35
IR
Input Map: C= 0x000f, S= 0x0003
12:30:02.705 VERBOSE getSetting(EnableTeleText)
12:30:03.526 VERBOSE getSetting(ListGraphFilters)
12:30:03.526 VERBOSE Graph contains the following filters:
12:30:03.526 VERBOSE - GB-PVR Writer
12:30:03.526 VERBOSE - Encoder
12:30:03.526 VERBOSE - Capture
12:30:03.526 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
12:30:03.526 VERBOSE - TV Audio
12:30:03.526 VERBOSE - TV Tuner
12:30:03.526 VERBOSE getSetting(SaveGraphFiles)
12:30:03.526 VERBOSE ConexantRecorder::StartRecording() done
15:00:00.082 VERBOSE ConexantRecorder::StopRecording()
15:05:12.371 VERBOSE ConexantRecorder::StartRecording(1, 1, 141, 0)
15:05:12.402 VERBOSE Capture Device is based on BlackBird architecture
15:05:12.402 VERBOSE Capture Device is using Conexant (derived) drivers
15:05:12.402 VERBOSE Loading filter names
15:05:12.402 VERBOSE Found names:
15:05:12.412 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
15:05:12.412 VERBOSE Hauppauge WinTV PVR PCI II Capture
15:05:12.412 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
15:05:12.412 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
15:05:12.682 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
15:05:12.692 VERBOSE Looking for encoder filter
15:05:12.702 VERBOSE - Hauppauge WinTV PVR PCI II Encoder
15:05:12.712 VERBOSE GetMedium(pCapturePin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000
15:05:12.712 VERBOSE getSetting(AutoDetectEncoderMethod)
15:05:12.712 VERBOSE About try all encoders until we find one that works...
15:05:12.712 VERBOSE Hauppauge WinTV PVR PCI II Encoder
15:05:12.732 VERBOSE Encoder.GetMedium(p656Pin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000
15:05:12.732 VERBOSE Pin mediums match...
15:05:12.742 VERBOSE using instance: 1
15:05:12.802 VERBOSE About to query available formats
15:05:12.802 VERBOSE ConexantRecorder::SetConfigurationECP()
15:05:12.802 INFO Firmware Version 2.5.32
Audio Firmware Version <<can't read now>>
Model 26032 Rev C182
Serial No: 2964406
Tuner[1]: Model 82 (LG TAPC_H791F)
Decoder: 28
AudioIC: 35
IR
Input Map: C= 0x000f, S= 0x0003
15:05:12.852 VERBOSE getSetting(EnableTeleText)
15:05:13.673 VERBOSE getSetting(ListGraphFilters)
15:05:13.673 VERBOSE Graph contains the following filters:
15:05:13.673 VERBOSE - GB-PVR Writer
15:05:13.673 VERBOSE - Encoder
15:05:13.673 VERBOSE - Capture
15:05:13.673 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
15:05:13.683 VERBOSE getSetting(SaveGraphFiles)
15:05:13.693 VERBOSE ConexantRecorder::StartRecording() done
17:20:00.031 VERBOSE ConexantRecorder::StopRecording()
21:00:18.501 VERBOSE ConexantRecorder::StartRecording(1, 1, 5, 0)
21:00:26.222 VERBOSE Capture Device is based on BlackBird architecture
21:00:26.222 VERBOSE Capture Device is using Conexant (derived) drivers
21:00:26.222 VERBOSE Loading filter names
21:00:26.222 VERBOSE Found names:
21:00:26.222 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
21:00:26.222 VERBOSE Hauppauge WinTV PVR PCI II Capture
21:00:26.222 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
21:00:26.222 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
21:00:32.722 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
21:00:36.287 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
21:00:36.617 VERBOSE Looking for encoder filter
21:00:36.878 VERBOSE - Hauppauge WinTV PVR PCI II Encoder
21:00:37.098 VERBOSE GetMedium(pCapturePin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000
21:00:37.098 VERBOSE getSetting(AutoDetectEncoderMethod)
21:00:37.278 VERBOSE About try all encoders until we find one that works...
21:00:37.278 VERBOSE Hauppauge WinTV PVR PCI II Encoder
21:00:37.559 VERBOSE Encoder.GetMedium(p656Pin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000
21:00:37.559 VERBOSE Pin mediums match...
21:00:38.660 VERBOSE using instance: 1
21:00:39.602 VERBOSE put_Mode(AMTUNER_MODE_TV)
21:00:39.602 VERBOSE put_CountryCode(1)
21:00:39.642 VERBOSE put_TuningSpace(1)
21:00:39.662 VERBOSE put_InputType(0, 0)
21:00:39.662 VERBOSE put_ConnectInput(0)
21:00:39.662 VERBOSE put_Channel(5, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
21:00:39.922 VERBOSE get_VideoFrequency() returns 77250000
21:00:39.922 VERBOSE get_CountryCode() returns 1
21:00:39.962 VERBOSE About to query available formats
21:00:40.022 VERBOSE ConexantRecorder::SetConfigurationECP()
21:00:40.122 INFO Firmware Version 2.5.32
Audio Firmware Version 1.4.42
Model 26032 Rev C182
Serial No: 2964406
Tuner[1]: Model 82 (LG TAPC_H791F)
Decoder: 28
AudioIC: 35
IR
Any suggestions? Is there anything I can do to make sure I don't miss other reoccurring recordings short of must making sure they appear as Pending the day they are due?
i'm having two problems, don't know if they are releated
I just ran out and bout a pvr-150mce and threw together a new machine around it. I'm ruuning xp pro but no service pack updates.
1st problem.
I created an account with zap2it and can log in through thier website fine, but when I select update epg I get a window telling me its retrieing epg data from zap2it fallowed by an instant error message stating my epg source settings might be wrong. The source is set to zap2it, the username and password are the same as the account I made in the site acceable through "click here" my subscription on that sight is listed as gold and due to expire 1/22/06 I've also added a line uo on that site and selected a handful of channels.
2nd problem.
with thay not wokrin I wnt ahead and manualy added 1 channel. Fox at channel 2. When I start gb-pvr amd go to live tv I can hear fox 2 coming out of the speakers but the window is black.
(not sure this belong on this thread, feel free to move it if not and sorry for the inconvenience if so).
Hello all, (first time on this forum)
First of all Sub a BIG THX for this fine peace of software, tried sagetv, meedio but gb-pvr for me beats them all I love it (until now :p ), so to the facts.
I'm curently upgrading my htpc with a pvr 500mce, the main goal is to be hable of recording 3 shows via cable ( I live in belgium btw, I know i saw the movie hrhrh), since i don't watch live tv(never at home when interesting things air ).
I know by the reading so far on this forum that gbpvr will handle this setup very well, but that's not the bottom of the case.
So this is it, i'll be adding to this setup 2 sat receivers so i could in theory record:
3 shows via cable (tuners entry on the cards) supported by gbpvr.
or 2 shows via cable and 1 via sat (supported i think).
or and this is the triccky one 1 via cable and 2 via the sats receivers( i would buy the optional bracket for the 500mce a/v inputs).
The question is will gbpvr support the third option:
1. via 1 USB-UIRT, in other words command 2 sat receivers with one of those?
2. or should i buy 2 USB-UIRT (does gbpvr support this kind of setup)?
2. or this kind of setup is simply put "impossible"?
If possible with the first case (one USB-UIRT), would it be better that the 2 sat receivers be from different manufacturers?
Many thanks to all for your time.
ps: And guys those of you with multi tuners in htpc and sat receivers, could you share any of your experince regarding this matter. thx
I'm having a problem with the sound starting to stutter and skip after watching tv for an hour or so. The video seems ok but the sound is gone or skipping. If I exit to the menu or tv listings and got back to tv it works again.
It occurred to me that there are two posting styles on the forum.
One where one thread continues for a very long time (such as webadmin) and another where every new topic related to a certain utility is published in a new thread (Comskip).
I was wondering if there is any preference between the two?
I am in the process of setting up my first MVP with GBPVR. So far, I am getting mixed results - I can get it to work, but it loses connectivity especially when viewing live tv. I am using wireless 54g - singal strength is strong. I think I must have configured something incorrectly. Would some mvp - gbpvr expert please provide step by step instructions? I loaded the latest mvp software from hauppauge and disabled the hauppauge mvp gui service - leaving the hauppauge mvp media service active. This works, but I do not know if that is optimal and is causing my problem(s).
sound is completely gone. it only works sometimes. if it does happen to be working, after one recording it is gone, until a couple of reboots later. sometimes it will not work for a few hours, but sound works everywhere but livetv. any ideas on what to do/check.
switching the decoders/renders does not have any effect either.
I have recently changed to the option to get the epg data from the dvb broadcast but since doing so i have lost my channel icons in the tv guide, apart from two (Channel Four and E4) i am in the uk.
Any ideas anyone.
).