i'm having bad audio issues. everything looks fine and it all works okay. the only thing i can think of is the SIS audio that i'm using. My orginal system had a P4-2.4 on a motherboard that had a via chipset. i've swapped over to a AMD 2800+ with sis chipset. i then did a fresh copy of xp pro, and then all these problems showed up. has anyone else had a problem with the sis audio chipset?

One of the problems of Comclean is the non continues timeline created by mpgtx. This causes some players to stutter or to hangup.
One possibility is not to use mpgtx but to use cuttermaran.
The newest version of comskip can create the cuttermaran project file (cpf) that is used for this alternative cutting.
On my server you can also find comclean2_0_0.zip containing a demuxer and a muxer you have to run before and after cuttermaran.
This is all demonstrated in the batchfile comclean2.bat.
This batch file can be used instead of the regular comclean
It has not yet been extensively tested so be carefull when using.

If I use the tuning Assistant, it finds the channels. But when I click on LiveTV it only displays the channel (E.g MTV) with no signal.

I use the Hauppauge 350 card and I have tried everything.

The "Capture sources" tab is set to "No channel changer required" because I cannot get the IR remote to work.

I use Direct Recording Plugin set for Internal Tuner, Norway, and Cable.

The cable antenna goes into the Hauppauge card. Here is a log:

16:44:13.062 INFO Log started
16:44:13.062 VERBOSE getSetting(ShowClosedCaptions)
16:44:13.062 VERBOSE getSetting(UseFFDSHOW)
16:44:13.062 VERBOSE getSetting(EnableTeleText)
16:44:13.062 VERBOSE getSetting(HorizontalZoom)
16:44:13.062 VERBOSE Horizontal Zoom: 1.050000
16:44:13.062 VERBOSE getSetting(VerticalZoom)
16:44:13.062 VERBOSE Vertical Zoom: 1.000000
16:44:13.062 VERBOSE getSetting(HorizontalOffset)
16:44:13.062 VERBOSE Horizontal Offset: 0
16:44:13.062 VERBOSE getSetting(VerticalOffset)
16:44:13.062 VERBOSE Vertical Offset: 0
16:44:13.062 VERBOSE getSetting(LiveTVPrePlayDelay)
16:44:13.062 VERBOSE getSetting(OSDTransparency)
16:44:13.062 VERBOSE getSetting(AspectRatio0)
16:44:13.093 VERBOSE getSetting(AspectRatio1)
16:44:13.093 VERBOSE getSetting(AspectRatio2)
16:44:13.093 VERBOSE getSetting(AspectRatio3)
16:44:13.093 VERBOSE getSetting(AspectRatio4)
16:44:13.093 VERBOSE getSetting(TeletextRect)
16:44:13.093 VERBOSE MinimumFilePlaySize=200000
16:44:13.218 VERBOSE DirectShowPlayerVMR9() initialising...
16:44:13.218 VERBOSE getSetting(OSDTransparency)
16:44:15.109 VERBOSE ConexantRecorder::StartRecording(2, 47, 2, 0)
16:44:15.109 VERBOSE getSetting(DeinterlaceMethod)
16:44:15.125 VERBOSE Loading filter names
16:44:15.125 VERBOSE Found names:
16:44:15.125 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
16:44:15.125 VERBOSE Hauppauge WinTV PVR PCI II Capture
16:44:15.125 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
16:44:15.125 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
16:44:15.125 VERBOSE FindFilterByName failed to locate filter: Hauppauge WinTV PVR PCI II Crossbar
16:44:15.125 ERROR Failed to find Crossbar filter
16:44:15.125 VERBOSE ConexantRecorder::StopRecording()

coudl you add a button to watch a channel / Program to the tvguide?
the same place where record button is...

Hi,

I'm new here and these forums look great, I'm looking forward to using gbpvr as well!

I've got myself a 1.6Ghz, 384Mb RAM computer ready to roll.

First question though, I want to have UK freeview. I'm looking at getting the WinTV-NOVA-T PCI. Will this work out of the box with gbpvr?

Also, I hear people talk about software vs hardware encoding, from waht I understand this card, as it is already digital coming in doesnt do any decoding onboard, but nor does the processor as it can be recorded or output straight to a TV. Is this a correct assumption and if not, what kind of performance impact will there be on the computer?

Finally, it comes supplied with a remote and remote reciever. Will this also work with gbpvr. If not whats a good suggestion for an all around standard remote?

Thanks,
Ben

Hi as many have probs with this card and Live TV I'm gonna show my setting which right now works =)
LeadTek winfast pvr2000 LiveTV works with these settings

playback -> use VMR7 (I dont know about the others, try em I guess)
playback->VideoDecoder -> DScaler mpeg2 decoder
Its the ones below I THINK solved my problem
misc -> Use Live Preview if possible -> YES
Deinterlacing -> Encoder passthrough

hope it helps someone!

I've mentioned it before & I'm probably the only person who gets this problem but I would like others to comment on it so I may have a chance to resolve it.

At the end of a timeshifted program (actually at the end of the padding given to any program on timeshift) my gb-pvr setup doesn't jump automatically onto the next program. It just freezes. If I hit pause/play then it fires up. Another thing that gets it moving, funnily enough, is moving the mouse ....

I thought it was a laugh - but I've tried constantly jiggling the mouse at the end of the timeshift file and the program happily continues playback .... It doesn't matter what decoders I use, various system drivers (mouse; video; audio etc.), demuxs or the like.

I've tried diasabling girder, which is the only thing that I would have thought could cause such an issue - still the freezing. Also I've tried many screensaver/power settings (both XP & GB-pvr), killing excess services, the usually <everything> to no avail.

Does anybody have a clue how to work around this freezing issue - especially with this mouse moving phenomenon .... :confused:

I have a vsionplus DVB by twinhan, model VP 7041, its a USB DVB terrestrial box.
I dont know for sure if it works yet with GBPVR, so far, I have not installed any drivers for this box, and I cant seem to find any BDA drivers for my model.
I was hoping somebody could point me in the right direction before I start installing drivers and software I dont need.
Thanks
Deus.

I have a FusionHDTV 5 lite card connected to digital cable in the USA. Using the Fusion software I can recieve analog and digital stations just fine. To get gbpvr to work with this card I assume I have to manually configure the tuning request table similar to other threads shown in this forum. The command string shown in this example is T:48,4,1 for OTA. Is there a reference on how to set this up for cable? Or at least a table showing what each parameter does? Thanks.

Hi Sub,

Any chance that in the next version the SelectedProgrammeTitle and SelectedProgrammeDesc Special Elements will support aligning (align="Right")?

Thanks,
Tomer.