How difficult would it be to support populating the TV Guide from the DVB EPG? Using XML sources is fine, but there are some advantages to using the DVB EPG:
1) Not all systems have internet access; with the DVB EPG it will come over the aerial
2) All channels that can be received have EPG data
3) The DVB EPG can provide updates for last minute schedule changes

When I watch live tv (which is perfect, no problem) I don't see an OSD displaying the channel name. Is this correct? I would like to see the channel name for a few seconds. Or did I miss somthing?

Hi, I've just completed a complete rebuild with fresh WinXP-SP2, and new GBPVR v0.93.10, but LiveTV recording service will not work. The gbpvrrecordingservice.exe-native.log shows that it cannot locate "ATI AVStream MPEG2 Multiplexer". The ATI 550 driver (6.14.10.86) installed ok and Radlight Filter Manager shows that the MPEG2 Mux is registered correctly, and other applications can use the 550 card without error.

I've done the usual things of rebooting PC several times, uninstalling/re-installing ATI driver, and even uninstalling/re-installing GBPBR (with reboots between each step) but no luck.

gbpvrrecordingservice.exe-native.log

20:40:20.209 INFO Log started
20:40:20.209 VERBOSE ConexantRecorder::StartRecording(1, 64, 2, 1)
20:40:20.249 VERBOSE Capture Device is based on BlackBird architecture
20:40:20.249 VERBOSE Capture Device is using Conexant (derived) drivers
20:40:20.249 VERBOSE Loading filter names
20:40:20.249 VERBOSE Found names:
20:40:20.249 VERBOSE ATI AVStream Analog Xbar
20:40:20.249 VERBOSE ATI AVStream Analog Capture
20:40:20.249 VERBOSE ATI AVStream Analog Tuner
20:40:20.249 VERBOSE ATI AVStream Analog TV Audio
20:40:20.359 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
20:40:20.429 VERBOSE ConnectPins: 'Audio Decoder Out' to 'ATI Analog Audio Input'
20:40:20.439 VERBOSE Looking for encoder filter
20:40:20.459 VERBOSE - ATI AVStream MPEG2 Multiplexer
20:40:20.489 VERBOSE GetMedium(pCapturePin) returns: {8CAEADDB-7C6C-469B-B70C-3081FD0A8554}-00000064-00000000
20:40:20.489 VERBOSE getSetting(AutoDetectEncoderMethod)
20:40:20.509 VERBOSE About try all encoders until we find one that works...
20:40:20.509 VERBOSE ATI AVStream MPEG2 Multiplexer
20:40:20.509 VERBOSE FindFilterByName failed to locate filter: ATI AVStream MPEG2 Multiplexer
20:40:20.509 ERROR Failed to find encoder filter
20:40:20.569 VERBOSE put_Mode(AMTUNER_MODE_TV)
20:40:20.579 VERBOSE put_CountryCode(64)
20:40:20.589 VERBOSE put_TuningSpace(64)
20:40:20.589 VERBOSE put_InputType(0, 1)
20:40:20.589 VERBOSE put_ConnectInput(0)
20:40:20.589 VERBOSE put_Channel(2, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
20:40:21.210 VERBOSE get_VideoFrequency() returns 203250000
20:40:21.210 VERBOSE get_CountryCode() returns 64
20:40:21.230 VERBOSE ConexantRecorder::SetConfigurationDefault()
20:40:21.230 VERBOSE getSetting(EnableTeleText)
20:40:21.260 VERBOSE getSetting(ListGraphFilters)
20:40:21.260 VERBOSE Graph contains the following filters:
20:40:21.260 VERBOSE - GB-PVR Writer
20:40:21.260 VERBOSE - Capture
20:40:21.260 VERBOSE - ATI AVStream Analog Xbar
20:40:21.260 VERBOSE - TV Audio
20:40:21.260 VERBOSE - TV Tuner
20:40:21.260 VERBOSE getSetting(SaveGraphFiles)
20:40:21.260 VERBOSE ConexantRecorder::StartRecording() done
20:40:33.257 VERBOSE ConexantRecorder::StopRecording()

Any ideas?

hi,

does someone know where i can find this file

thanks in advance

Hi,

GBPVR works GREAT on my PC. I can watch LIVETV, change channels, no problem.

I get the GBPVR MENU on my TV, via the MPV. No Problem.

BUT trying to watch liveTV simply throws up the "No Tuners are available with the requested Channel" message.

1. I have disabled the two Hauppage Services.
2. I don't have GBPVR running on the PC, but the recording service is in the tray (not recording)3.
3. I have set the # of MPV servers in the GBPVR config set to "1", and I do not have the recording service duplicated in the Startup.

There must be something SIMPLE, surely, that I am doing wrong?
Any ideas?

Cheers,

k.

I have a problem where I can't install any release or pre-release newer than 09211. Is there anything different in the install process SUB? Basically it looks like its completed the install and just before it would normally display the message about using a Hauppauge Remote it rolls back the install and complains of an error (non-discript error message - Fatal Error I think it was). I have uninstalled 09211 - removed the devnz directory - rebooted and it still fails the same way - and yet 09211 installs ok everytime.

Any help on this GREATLY appreciated. The main feature I want to get is the export/import recordings so in future playing around I can Backup my recording list as I have quite a few "orphaned" recordings from prior fresh installs / pc changes.

Just to say that I have updated this skin to work with the new gbpvr version (0.93.10).


cheers,

tieke

I have to say this is the nicest background I've seen for a long time. I'm using it as my windows desktop (A higher res version) and my Background for the Blue Skin. It looks REALLY nice on a TV (nice contrast) and it's great as a desktop background if you are like me and have LOTS of desktop shortcuts etc as its dark enough for the icons to standout. I got it from a desktop wallpaper site somewhere - didn't seem to have any copyright info anywhere?

I was wondering if there was a way to do this so I could free up some disc space automatically (my current HDD is a measly 33GB, till I can find a good deal on a 320GB; I use my xbox to store/view them in XBMC, and it has a 200GB HDD). I assumed the postprocessing.bat was copied into the dir where the video ended, but when I tried adding some code (to move the avi to a temp folder, delete the current dir, and move the avi back and delete the temp folder) it ended up deleting the main dir for GBPVR :mad:. Anyone know of a simple way to do this? C+ is more of my fortay than DOS commands...

I was wondering if there was a way to do this so I could free up some disc space automatically (my current HDD is a measly 33GB, till I can find a good deal on a 320GB; I use my xbox to store/view them in XBMC, and it has a 200GB HDD). I assumed the postprocessing.bat was copied into the dir where the video ended, but when I tried adding some code (to move the avi to a temp folder, delete the current dir, and move the avi back and delete the temp folder) it ended up deleting the main dir for GBPVR :mad:. Anyone know of a simple way to do this? C+ is more of my fortay than DOS commands...