When I view the 'Guide' tab on the Android app and scroll to the bottom, the last channel (highest number) is missing. All the channels are present when viewing the 'Channels tab'. see pics

[ATTACHMENT NOT FOUND] [ATTACHMENT NOT FOUND]

I tried scrolling up and down several times and landscape orientation but still won't show the last channel.
Build version 1.3.180426 (24)

Hi,

I'm moving from DVBLink to NextPVR but having issues.

First all seemed to be good, I was able to record and play just fine.

But the recording seemed to fail after a couple of successful recordings, seemed like recording service went very sluggish and started to cause errors to recordings and after that stopped recording until the service was rebooted.

I scheduled a service reboot for every night hoping it would fix it.

But now I noticed NextPVR recorded empty files, they show up in records, but do not play and looks like there's no data.

Currently I'm trying to rescan channels, but so far no channels have appeared.
At the same time my TV shows channels just fine.

System:
Windows 10 64-bit, Intel Core i3 3225, 8GB DDR3, 1TB HDD. Tuners: 2 x PCTV 291e/461e BDA 28179 TVTuner C

Logs attached.

When I attached a 4k television to my Windows 10 computer, NextPVR started cropping the UI in a way that makes all dialog boxes impossible to see. I switched back to 1080p, and the problem persists, even after uninstalling and reinstalling. I have tried tweaking both the zoom and resolution settings to no avail. Any idea what may be wrong? A couple of screenshots are attached for reference. Thanks!

I have everything set up correctly, i.e. I can watch television, have a guide that will update periodically, etc. But, when I record shows, the actual recording is cut short--anywhere from 15 minutes to 1 hour long. I am using IPTV, and have no issues with it, but it will glitch on rare occasions, due to network congestion I assume. I have tried setting 'use out of process digital recording' to false, but made no difference in the error. Either way, the recordings are cut short from finishing

I noticed that I will still see the first recording in the task bar, even when multiple recordings have been attempted (all of the attempts are successful to start, but have media files that aren't complete, as I described earlier in the email). The first recording attempt never leaves the task bar icon.

I have attached log files that may help in diagnosing the issue.

Sub,

Thanks for creating the client. For the most part, I think that it works great, however I would like to see some more controls for playback.

I have one particular TV in one particular room that I can't put a RPi on and I'm stuck with watching whatever is on. I've always wished that I could watch some of the programming that I've recorded and now I can. I put the client on my tablet and now I can watch some of the show's that I would normally only be able to watch on one of the other systems.

I started watching a recorded show via my tablet. Playback was great with an exception or two. The pause button didn't work (it works on the phone, but not on the tablet) so, I pressed stop. When I went to resume playback, I had to start from the beginning and then used the progress bar to FF to where I left off. This could be an issue if there was sometime between viewings because I wouldn't be able to remember where I had left off. There was a little trial and error finding where I stopped because I had not looked at the time stamp and I had to guess how long I had been viewing and then jumped around a bit to find the correct time.

I don't know if there is a way to sync with the client with the PVR to mark my place or something? Also, FF and RW buttons would help.

Just a few thoughts.

Thanks

Daryl

Hi.

What extra configuration do I need to do to get ffdshow to work?

Even after I switched my NextPVR video decoder from the original "Microsoft DTV-DVD Video Decoder" to "ffdshow" I get audio but not video.

I am using HDHomeRun LAN tuner and their native app gives me both video and audio (it worked fine before and still works after I installed ffdshow).

Thanks!

Is there a way to watch a desired channel from the TV guide with a single key stroke? Currently, I need to hit enter, then select watch, then enter again.

....I found a way with the following addition to the key mapping:

<Subsystem name="TVGuide">
<Key code="{ALT}G" command="SelectGroup"/>
<Key code="Return" command="Play"/>

Yesterday, I installed the NPVR android app on my T95Z Plus Smart TV Box Running Android 7.1 OS. This is just to let those who might be curious how it works on that device that it works fairly well as long as you have an air mouse. The major drawbacks are that since it was meant for a phone, some of the screens are a little difficult to read in the fifteen foot enviroment, and playback of videos is limited to start, pause, and exit. I was unable to find any way to fast forward or skip at this time. The dropdown screen indicators are really small but they do work with the air mouse. At this time the only real use for the app is the ability to delete recordings and to set reccordings on the Windows server, and to see what the scneduled recordings are.

Personally, I think it was worth it to install the app and I look forward to it improving in functionality in the weeks/months ahead.

Whenever I attempt to play video by clicking on the Video Menu selection, NextPVR hangs. I have tried uninstalling and reinstalling NextPVR without any success at resolving this problem. Logs attached.

Currently if you use more than one IPTV provider that uses exactly the same name, NPVR overwrites the channel list for that of the other provider.

If it was possible when it detects another folder with the same name, another could be created such as "France (2)" for example.