A little help please. Could you explain how Bulk Remap is supposed to work on the Settings / Channels screen? I have 1,000+ channels in the m3u file from my IPTV provider, and I wanted to clear out the first 100 or so by changing their channel numbers from 1 to 2001, 2 to 2002, etc. Is it possible to add 2000 to the channel numbers of a selected set of channels? That would then enable me to give channel numbers to the ones I really care about in the 1-100 range.
Alternatively, is it possible to control how channel numbers are assigned when setting up a new Device (e.g. start numbering from 101)?
When I connect to npvr with my phone I see two channel icons that are missing on the channels page. But when I select the channel the channel icon shows up. Here are a couple screen grabs.
[ATTACHMENT NOT FOUND] [ATTACHMENT NOT FOUND]
It is always the same channels that are missing every time I connect. The strange thing is that on my tablet it is missing a different icon, and one that shows up on my phone. I have tried emptying and updating the guide in npvr and restarting, clearing the data on the andriod app, and uninstalling and re-installing the app, and it shows the same icons missing on both devices.
I have three RPi devices running LibreElec v8.2.4 (Kodi 17.6). I will start a recorded show on one TV, then move to another room and try to resume the show. However, I have to disable and re-enable the NextPVR plugin and have it re-down load the EPG channels and content before I can resume the show on the different TV.
This is not new. I posted something similar to this a couple of years ago when I first started using NextPVR. If I remember correctly, the answer was to try X-Newa, but I could never get it to work, so I've always stuck with the default NextPVR plugin.
I don't know if there is a setting somewhere that I need to adjust, or to set or to tweak? Something within either Kodi, the plugin or on the NextPVR server? I would think that there should be a daemon somewhere that runs that would keep checking in with the server to see if there are any updates. Perhaps there is something that I need to enable? Its just getting old having to disable/re-enable the plugin, so I can resume watching what I was watching.
Would be great if the app had the ability to allow the user to select direct play, therefore turning off the transcoding and letting the device do all the heavily lifting (if required). Most modern android devices should allow h.264 & mpeg decoding without taxing it too much.
Our TV network provider Ziggo broadcasts the full EPG of every possible channel on each channel. So for a full EPG update I only need NextPVR to scan one channel/frequency for one minute. I've tested this by emptying the EPG from the Settings window, selecting one channel on the Channels section and push the "Update EPG" button. This gives me a full guide for all my channels. So technically this works fine. My wish is to have the option in Settings -> Misc2 to select a specific channel for the auto update EPG.
Just switched from W7/Media Center to W10/NPVR full-time...sorry for my influx of questions lately. Hopefully this will be the last.
I haven't found definitive instructions (at least to me) about setting up NPVR as a server. So, is it as simple as choosing the "Clients" tab, checking "Enable Web Server" and "Allow Remote Access", and choosing a web server port (80, 22, whatever...), and opening the port in my router and firewall? I believe that I read somewhere to also change the Username, Password, and PIN. Is this all correct?
From there, how exactly do I connect my client(s)? I have another desktop and laptop I would like to access the main NPVR server from. Do I just enter the same Access PIN and Username/Password? At what point would I specify the IP address and port for the server? Any clarification is appreciated, as the wiki is a vague.
Thanks!
Also, on another note, is there a way to edit the size of the font for Recorded Show descriptions and Movie descriptions? Reading it from 2 feet away on the PC is fine, but once it's on the TV it would be easier to read if I could make it larger.
Really like the improvements to version 4.1.0 especially the ability to remove channel numbers in the TV guide. I was wondering if there was a way to remove them from the smaller guide as well. I tried leaving them blank but the program wont let me do this so they are now listed 1 though 70 which confuses guest's since they are not in the correct order. My cable company has the channels scattered in a random order so I did this intentionally to group channels together such as all the sports, news, local programming etc. I know you have more serious issues to work on or fix and this isn't that important but if you get a chance and there is a way to accomplish this I would appreciate any information on how. Thank you.
Hi. The channels ITV 2 HD and ITV 4 HD currently do not have any audio when I attempt to watch them live in NextPVR. A message comes on the screen which says:
"Missing audio? You don't have a MPEG-1 decoder selected. You can fix this on the Settings->Decoders screen."
However, on the Settings->Decoders screen, I have 'LAV Audio Decoder' set for all of the Audio Decoder types, including MPEG1 Audio. Plus, ITV 1 HD and ITV 3 HD play just fine, with audio. Any idea what the problem might be?
Hi all,
I use android box to watch iptv via stb emulator, want to know how to use this to record my favorite show? just download from play store and install?
Thank you
