No known card detected, for WinTV PVR USB2

[fiteclub]

here is the log

[sub]

When you crate a capture source, and tick the 'only show cards detected in this machine' checkbox, does it find anything? The filtercheck.log looks like it should match the device named "Hauppauge WinTV PVR2 USB2 (AVS)".

[fiteclub]

Hmm, it does not; only finds my Avermedia card

[sub]

Reproduce that, then zip and attach the config.exe.log and config.exe-native.log and I'll take a look.

[fiteclub]

here they are

[sub]

Can you make a capture source and select the "Hauppauge WinTV PVR2 USB2 (AVS)" device, ignoring the 'only detect...' checkbox, then try to watch live tv, then zip and attach a complete set of logs?

[fiteclub]

should I remove my Avermedia capture device from the list first? If I try to watch live tv, gbpvr will use that device.

[fiteclub]

went ahead and removed avermedia device; here are the logs after setting up device as you asked.

[sub]

Can you make sure you have this section in your direct.ini file:

[Hauppauge WinTV PVR2 USB2 (AVS)]
INIT_MODE=ECP
INIT_MSP=0
BLACKBIRD=1
SUPPORTS_FM_RADIO=1
DETECT_MSP=0
FILTER_CROSSBAR=Hauppauge PVR USB2 AVS Crossbar
FILTER_CAPTURE=Hauppauge PVR USB2 AVS Video Capture
FILTER_TV_TUNER=Hauppauge PVR USB2 AVS Tuner
FILTER_TV_AUDIO=Hauppauge PVR USB2 AVS TvAudio
FILTER_ENCODER=Hauppauge PVR USB2 AVS Encoder
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audio In
PIN_CAPTURE_PREVIEW_AUDIO_OUT=Audio Out
PIN_CAPTURE_I2S_OUT=I2S
PIN_CAPTURE_656_OUT=656
PIN_ENCODER_I2S_IN=I2S
PIN_ENCODER_656_IN=656
PIN_ENCODER_OUT=MPEG
PIN_WRITER_INPUT_IN=Input

This is the section in the master direct.ini file. You seem to have something slightly different in your direct.ini. For example the "FILTER_TV_TUNER" line is wrong.

[fiteclub]

sub

That fixed it. I should have learned my lesson by now and ALWAYS cut and paste. Sorry for the run around.

BTW, will this section be added into the direct.ini file of future versions of GBPVR?