v 1.3.11 zero file sizes
|
2009-02-05, 04:39 PM
sub Wrote:Its not currently exposed, but I could add a setting for you to allow the multidec multi-records to occur. You'll end up with all but the first recording started being encrypted. You might be able decrypt after the fact - but this is only possible on some encryption systems. I would dearly love to have this option, but hesitate to ask for it if I'm the only one.
2009-02-05, 05:09 PM
dennit Wrote:i would dearly love to have this option, but hesitate to ask for it if i'm the only one. +1 
2009-02-05, 05:58 PM
My testing is going fairly well, but have a problem still. If I preview the channel first in live tv, then set it to record, everything is fine. If I select a different channel to start to record, I usually get 0 byte files. It looks like it needs a little time to make the switch to get ready to record. Is there anything I can to to get it to wait a little before it tries to start recording?
[SIZE="1"] Server= Asus M3A78-EM, 4 gigs ram, AMD A64 5200+, Windows 7 home premium 32, 1 HVR-1800, 1 PCH A-100, Test Rig, Biostar 880g+, AMD X2 260, 4 gb ram, Windows, 7 Home Premium 32, 1 DCR-2650 cablecard tuner [/SIZE]
[SIZE="1"][/SIZE]
2009-02-05, 06:14 PM
dennit Wrote:I would dearly love to have this option, but hesitate to ask for it if I'm the only one. Try this patch, and add <BDAAllowMultiRecordOnEncrypted>true</BDAAllowMultiRecordOnEncrypted> to the config.xml.
2009-02-05, 06:38 PM
sub Wrote:Try this patch, and add <BDAAllowMultiRecordOnEncrypted>true</BDAAllowMultiRecordOnEncrypted> to the config.xml. Thanks!!!
2009-02-05, 09:22 PM
Thanks so much, the psi patch has fixed my problem too see this thread. I still have to have ignore pmt crc errors on to scan for the channel but thats not a big deal.
The ability to do multi record on the encrypted channels is just the icing on the cake. Sub you are a legend, thanks again 
2009-02-06, 01:35 AM
Hi Sub, You likely are sick of this but it is soooo close. I did about a hundred tests and found that on ati mux, I got good recordings every time. With ts mux and multirecord on, I get 0 byte files most of the time, but have better odds if I preview the channel first. If I turn off multirecord, I often get a zero byte file, then in a few seconds it starts a new file and records fine. Unfortunately, I really need multirecord working (if possible).
Here are the logs for a multi and non multi record. Both show it finding small files but the non-multi restarts the recording and it works [ATTACHMENT NOT FOUND] [ATTACHMENT NOT FOUND]
[SIZE="1"] Server= Asus M3A78-EM, 4 gigs ram, AMD A64 5200+, Windows 7 home premium 32, 1 HVR-1800, 1 PCH A-100, Test Rig, Biostar 880g+, AMD X2 260, 4 gb ram, Windows, 7 Home Premium 32, 1 DCR-2650 cablecard tuner [/SIZE]
[SIZE="1"][/SIZE]
2009-02-06, 01:47 AM
Create a C:\temp directory, and an HKEY_LOCAL_MACHINE\Software\Devnz\LogTSWriter=1 (DWORD) registry setting, then do restart the recording service and reproduce one of this failed recording, then zip and attach the c:\temp\recording-x.log file for me to look at.
2009-02-06, 02:15 AM
Here it is.
[ATTACHMENT NOT FOUND] Thanks
[SIZE="1"] Server= Asus M3A78-EM, 4 gigs ram, AMD A64 5200+, Windows 7 home premium 32, 1 HVR-1800, 1 PCH A-100, Test Rig, Biostar 880g+, AMD X2 260, 4 gb ram, Windows, 7 Home Premium 32, 1 DCR-2650 cablecard tuner [/SIZE]
[SIZE="1"][/SIZE]
2009-02-06, 02:44 AM
soccerdad Wrote:Here it is. I'm a bit behind soccerdad in my testing, but I can confirm I see the same things he is seeing - 0 byte files for the ts mux and good recordings for both ATI and Cyberlink MPEG muxes. I also was having lots of trouble with crashes under 1.3.11 when scanning in config, and all of those problems are gone with these patches. I've completed four DVB-S scans without a problem. I was about to produce the requested test data, but since he's already done it, I'll hold off. Thanks sub! |
|
|
