v 1.3.11 zero file sizes

dennit · 2009-02-06, 02:50 AM

soccerdad Wrote:Here it is.
[ATTACHMENT NOT FOUND]

Thanks

I went ahead and tried it too. Mine looks nearly the same:

Code:
49:07.000    Checking for driver PID filtering

49:07.000    Filter GB-PVR Flow Status

49:07.000    Checking GB-PVR Flow Status

49:07.000    Filter GB-PVR PSI Parser

49:07.000    Checking GB-PVR PSI Parser

49:07.000    Filter MPEG-2 Demultiplexer

49:07.000    Skipping MPEG-2 Demultiplexer

49:07.000    Filter GB-PVR TS Mon

49:07.000    Checking GB-PVR TS Mon

49:07.000    Filter MDAPI Filter

49:07.000    Checking MDAPI Filter

49:07.000    Filter DTV-DVBS 878 Digital Capture Filter

49:07.000    Checking DTV-DVBS 878 Digital Capture Filter

49:07.000    Found IBDA_Topology@1

49:07.000    Found IBDA_Topology@2

49:07.000    Filter DTV-DVBS 878 Digital Tuner Filter

49:07.000    Checking DTV-DVBS 878 Digital Tuner Filter

49:07.000    Found IBDA_Topology@1

49:07.000     - KSNODE_BDA_RF_TUNER         

49:07.000     - KSNODE_BDA_QPSK_DEMODULATOR 

49:07.000    Found IBDA_Topology@2

49:07.000    Filter Microsoft DVBS Network Provider

49:07.000    Checking Microsoft DVBS Network Provider

49:07.578    CRC32 is good. Parsing PAT...

49:07.578    PAT maps service_id 0000 to PMT PID 16 (0x0010)

49:07.578    PAT maps service_id 0066 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 006d to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 00cb to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 00d3 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 0108 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 0124 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 01c9 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 01ce to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 01cf to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 01d0 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 01e4 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 0205 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 033a to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 037d to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 03e7 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 16c0 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 176b to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 1d7e to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 1f6a to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 24b2 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 24ea to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 4a4a to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 4a53 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 4a55 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 4a77 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 4a99 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 4a9a to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 4ab3 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 4ab4 to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 4acf to PMT PID 33 (0x0021)

49:07.578    PAT maps service_id 8000 to PMT PID 33 (0x0021)

***sub*** · 2009-02-06, 03:00 AM

soccerdad Wrote:Here it is.
[ATTACHMENT NOT FOUND]

Thanks

Sorry, can you do that again, but post a matching set of GBPVRRecordingService.exe.log and GBPVRRecordingService.exe-native.log and recording-x.log? (preferrable Nasa TV again)

You too dennit. (any channel will be fine)

dennit · 2009-02-06, 03:13 AM

sub Wrote:Sorry, can you do that again, but post a matching set of GBPVRRecordingService.exe.log and GBPVRRecordingService.exe-native.log and recording-x.log? (preferrable Nasa TV again)

You too dennit. (any channel will be fine)

Here it is (not NASA).

dennit · 2009-02-06, 03:14 AM

dennit Wrote:Here it is (not NASA).

Oops - lost the attachment last time.

soccerdad · 2009-02-06, 03:35 AM

Here is nasa again
[ATTACHMENT NOT FOUND]

[ATTACHMENT NOT FOUND]

***sub*** · 2009-02-06, 03:46 AM

Can you try this patch? Make sure you have <BDASubmitTuningRequestTwiceOnRecord>true</BDASubmitTuningRequestTwiceOnRecord> in config.xml.

dennit · 2009-02-06, 11:22 AM

sub Wrote:Can you try this patch? Make sure you have <BDASubmitTuningRequestTwiceOnRecord>true</BDASubmitTuningRequestTwiceOnRecord> in config.xml.

FYI, I've always had that turned on during these tests.
I tried NASA first. I got a zero byte file, then a few seconds later it started a good recording labeled -1. I'm not sure if that's what soccerdad was getting. I looked at the file, and it was a single unchanging photo - I guess NASA wasn't sending video then. I'm not sure if that would make a difference.

Having that success, however, I tried a DVB-S multidec channel and got the same 0-byte files as before this change - a first one, then a few seconds later a second one. I've got the txt file and recording logs attached.

dennit · 2009-02-06, 11:36 AM

dennit Wrote:FYI, I've always had that turned on during these tests.
I tried NASA first. I got a zero byte file, then a few seconds later it started a good recording

Let me know if you want logs for NASA.

As an aside, I have multidec and multirec turned on, and I have the config.xml tweak
<BDAAllowMultiRecordOnEncrypted>true</BDAAllowMultiRecordOnEncrypted>
still in there.

Another possibly useful bit of info. When I want to copy logs, edit config.xml, etc. I usually use the tray icon to stop the recording service. It's taking two tries before the icon changes from green to black/white. However, I can hear the relay in the DVB-S card drop out (stop sending voltage to the dish) the first time.

soccerdad · 2009-02-06, 12:37 PM

I applied the patch and it looks like it is working great with multirecord on. I get recordings very quickly and so far no zero bytes even switching sats. I also do not get the zero byte then recording like I got without multi record on.

I will keep testing but it looks like it has solved the problem.

Thanks.

dennit · 2009-02-06, 01:05 PM

soccerdad Wrote:I applied the patch and it looks like it is working great with multirecord on. I get recordings very quickly and so far no zero bytes even switching sats. I also do not get the zero byte then recording like I got without multi record on.

I will keep testing but it looks like it has solved the problem.

Thanks.

Seeing this, I went back and tested again. I had multirecord turned off for all the earlier tests. As soon as I turned multirecord on, it worked! No zero byte file for a multidec single DVB-S recording. I'm going to test some more, and there's still an issue with zero byte files if multirecord is off, but it's looking good - Thanks sub!

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	file types of recorded TV	paul1	3	3,424	2012-09-30, 05:20 PM Last Post: sub
	No Data In the Recorded File	zb1	5	1,966	2010-08-24, 01:08 AM Last Post: zb1
	Path to file being recorded.	brianj	5	2,032	2010-08-08, 10:58 PM Last Post: brianj
	error: failure playing back file	yonu	4	1,806	2010-07-12, 12:52 AM Last Post: yonu
	UK Freesat Scan.cache File	jeffers	3	1,871	2010-05-25, 10:34 PM Last Post: jeffers
	3 AC3Filter instances when playing back a still recording TS file?	jksmurf	3	1,711	2010-05-17, 12:30 AM Last Post: jksmurf
	Recording stops at 4gb file size	experiencebliss	5	2,130	2010-05-04, 02:54 AM Last Post: pBS
	Hauppage HVR-950q, no file created when recording, no pause.	donbrowne	5	1,777	2010-04-08, 04:03 PM Last Post: sub
	ffdshow postprocessing on .ts file playback	alibert	2	1,534	2010-04-05, 05:33 AM Last Post: alibert
	ATI Mux / mpeg file recordings playback issues	topperdude	10	3,850	2010-03-29, 11:44 PM Last Post: ww4397