GB-PVR with TechniSat SkyStar Hd2 dount work ??

[dater]

Hello,
I have installed the GBPVR 1.4.7 Version and have also adjust the "Recording Source" with TechniSat SkyStar HD2, when I press "Map Digital Channels to EPG.." I get the message that the Msgbox "GB-PVR was unable to start BDA-Device ....and not already in use" ??

The DVBViewer found the TechniSat SkyStar HD2-> TechniSat Mantis DVBS BDA Receiver !

what can I do ???

[sub]

Run the filtercheck.exe in the gbpvr directory, then post the filtercheck.log that gets created and I'll take a look.

[dater]

12:41:28.453 INFO Log started
12:41:28.453 INFO Filter Check v1.0
12:41:28.453 INFO
12:41:28.453 INFO
12:41:28.453 INFO Checking AM_KSCATEGORY_CAPTURE filters
12:41:28.468 INFO found: MPU-401
12:41:28.468 INFO - (input) MIDI
12:41:28.468 INFO - (input) Synthesizer
12:41:28.468 INFO - (output) Synthesizer
12:41:28.468 INFO - (input) Synthesizer
12:41:28.468 INFO - (output) Synthesizer
12:41:28.468 INFO
12:41:28.468 INFO found: Aureon 5.1 Fun Wave
12:41:28.468 INFO - (output) Aufnahme
12:41:28.468 INFO - (input) ADC
12:41:28.468 INFO - (input) Lautstärke
12:41:28.468 INFO - (output) DAC
12:41:28.468 INFO - (input) SPDIF-Schnittstelle
12:41:28.468 INFO - (output) SPDIF-Schnittstelle
12:41:28.468 INFO
12:41:28.468 INFO
12:41:28.468 INFO
12:41:28.468 INFO Checking AM_KSCATEGORY_ENCODER filters
12:41:28.468 INFO
12:41:28.468 INFO
12:41:28.468 INFO Checking AM_KSCATEGORY_CROSSBAR filters
12:41:28.468 INFO
12:41:28.468 INFO
12:41:28.468 INFO Checking AM_KSCATEGORY_TVTUNER filters
12:41:28.468 INFO
12:41:28.468 INFO
12:41:28.468 INFO Checking AM_KSCATEGORY_TVAUDIO filters
12:41:28.484 INFO
12:41:28.484 INFO
12:41:28.484 INFO Checking AM_KSCATEGORY_VBICODEC filters
12:41:28.484 INFO found: NABTS/FEC VBI-Codec
12:41:28.484 INFO - (input) VBI
12:41:28.484 INFO - (output) NABTS
12:41:28.484 INFO - (input) HWNABTS
12:41:28.484 INFO
12:41:28.484 INFO found: Untertiteldecoder
12:41:28.484 INFO - (input) VBI
12:41:28.484 INFO - (output) CC
12:41:28.484 INFO - (input) HWCC
12:41:28.484 INFO
12:41:28.484 INFO found: WST-Codec
12:41:28.484 INFO - (input) VBI
12:41:28.484 INFO - (output) Videotext
12:41:28.484 INFO
12:41:28.484 INFO
12:41:28.484 INFO
12:41:28.484 INFO Checking KSCATEGORY_BDA_NETWORK_TUNER filters
12:41:28.484 INFO found: TechniSat Mantis DVBS BDA Receiver
12:41:28.484 INFO - (input) Input0
12:41:28.484 INFO - (output) MPEG2-Transport
12:41:28.484 INFO
12:41:28.484 INFO
12:41:28.484 INFO
12:41:28.484 INFO Checking KSCATEGORY_BDA_RECEIVER_COMPONENT filters
12:41:28.484 INFO found: TechniSat Mantis DVBS Caputre BDA Receiver
12:41:28.484 INFO - (input) Input0
12:41:28.484 INFO - (output) MPEG2-Transport
12:41:28.484 INFO
12:41:28.484 INFO found: BDA Slip De-Framer
12:41:28.484 INFO - (input) NABTS
12:41:28.484 INFO - (output) IPv4
12:41:28.484 INFO
12:41:28.484 INFO found: BDA MPE-Filter
12:41:28.484 INFO - (input) MPE
12:41:28.484 INFO - (output) IPv4
12:41:28.484 INFO

[sub]

Which card type did you select when yuou setup your capture source? You should have chosen 'TechniSat SkyStar HD2 type2'.

If you dont have that option listed, add the following to you bda.ini file:

[TechniSat SkyStar HD2 type2]
TUNING_TYPE=DVB-S
ONLY_SCAN_ON_LOCK=1
RECEIVER_ONLY_MODE=1
FILTER_RECEIVER=TechniSat Mantis DVBS BDA Receiver
PIN_RECEIVER_IN=Input0
PIN_RECEIVER_OUT=MPEG2 Transport

[dater]

Hallo,
I select "TechniSat SkyStar HD2 type2" and in bda.ini entry has been.

[sub]

I cant see whatever pictures you tried to attached above.

[dater]

Hello,
look here for -> http://sites.google.com/site/fastclipv2/bilder

[sub]

Hit the 'map digital channels to epg channels' button to reproduce the error, then post the config.exe.log and config.exe-native.log and I'll take a look.

[masariello]

...I've attached my log files

They were obtained as requested by Sub on a virgin 1.4.7 install on a Vista 64 system, fully up-to-date with M$ patches etc.
Skystar HD2 driver v1.3 from 13.07.2009

I'd love to ditch VMC for MP. I really hope we can find a workaround for this.

Thanks in advance for all the good work!

[Cormick]

Hello is the solution? I have the same problem as Dater.
"TechniSat SkyStar HD2 type2" in bda.ini entry has been.
OS
WINDOWS XP SP3 install on E: (windows is new install) and net.framework 3.5
my hardware
Tv kart skystar HD2 +CI slot + Cryptoworks eurocam
driver v1.3 from 13.07.2009

Please help