Problem setting up Reclock

[imilne]

You may also see yellow (I think) if you try to bitstream, because that severely limits the adjustments Reclock can make (it can basically only drop audio packets to try to keep it in sync, and you can only drop a few packets before you'll notice the audio breaking up). If the audio is decoded by the PC first, then Reclock's can properly adjust its speed and/or resample it.

[Reddwarf]

Green = all good; you're either running at the same refresh rate as the video, or Reclock has been able to speed up/slow down (by the % amounts you've allowed) the video to match.
Yellow = Reclock can't adjust the video to match the refresh rate, eg 23.796fps with an allowed 1% speedup will never give you green at 50hz (but 5% speed up will).
Red = not working
Flashing between red/green = Reclock is "getting used" to the current refresh rate, and is learning what tweaks are needed to the clocks to get things perfect (at which point the icon will turn solid green)

Thanks. I will try disabling the other codecs on my htpc (the one with SB X-Fi) later today and report.

[Reddwarf]

I was able to get sound on my second testrig with all decoders enabled by changing "Audio Settings" -> PCM to WASAPI and Bitstream to WASAPI, then selecting Speakers for WASAPI Exclusive. Tried the same on my htpc (with SB) but no luck. Does that work for you?

[imilne]

I won't be able to check tonight, but my settings were already on WASAPI I think.