No Sound on Hdmi output or std monitor

[Rowkin]

Hi
I am new to GB-PVR so am still on a steep learning curve. Am using a ASUS AS P2-M2A69G barebones system (ati X1250 video, audio ?? ) AMD 5200+, 2 gb ram, old 200 gb ide hard drive, sata dvd player & a hauppauge nova-T-500 Tuner. Operating system is windows xp home sp3 a new install + motherboard drivers, Microsoft direct(10)X & recommended bits from wiki. I am trying to put together a set top box / pvr to work on HD freeview New Zealand.

After quite a bit off playing round have got everything working but the sound & EPG. ( Have spent a fair bit of time checking all options in config & the mute is not switched on). Cyberlink Power-cinema that came with the tuner card finds the sound card drivers 'Ok' . Though you do have to change the diver depending whether your output is though the Hdmi or sound card audio outputs, using dual screen mode you have to chose one or the other & restart the program to change drivers.
Sound Divers are Relteck. GB-PVR ver 1.2.9
Just for information the system seems up to the job with the CPU only going above 80% occasionally at 720p output & the case remaining cool with low fan noise.
Log files attached.
I have reached the end of my present level of expertise & welcome any help or suggestions many thanks in advance.

RowKin or John

[whurlston]

Code:

2008-10-12 21:29:09.062    VERBOSE    getSetting(PreferredAACLATMAudioDecoder)
2008-10-12 21:29:09.093    VERBOSE    FindFilterByName failed to locate filter: MONOGRAM AAC Decoder
2008-10-12 21:29:09.093    VERBOSE    getSetting(PreferredH264AudioDecoder)
2008-10-12 21:29:09.109    VERBOSE    FindFilterByName failed to locate filter:

If looks like you don't have any of the supported AAC decoders or they are not set in your Config.

[Rowkin]

Thanks

Followed advice from 'SUB' on other threads. Have sound on all channels now. Was using poor keywords in the seach.

John