I cannot access the NEWA log in screen. When I enter the address I receive an "unable to connect" error message. I have tried changing the port, turning off my firewall and uninstalling and reinstalling NPVR after deleting the /web file. I'm running the latest version of NPVR and it works flawlessly except for this issue. I confirmed that the services entry for NPVR is configured correctly. I've confirmed I am using the correct static IP address. I also have confirmed that I have checked the enable web server check box.

As an experiment, I tried installing NPVR on another machine on my network and was able to access that instance of NEWA without any issues. I've read through the forum and have found references of NEWA not working after an upgrade. I hadn't tried to use NEWA until recently.

I'd really appreciate any suggestions. Thanks!

I cannot get any NPVR section but Videos to recognize both xml and jpg files in addition to a video file. Pictures will recognize jpg but not xml. I need two sections that will recognize both, one for movies and one for TV. Is there a relatively easy to accomplish this or am I out of luck?

Since the provider is nuking clearQAM for the blasted encrypted channels, was forced to get a cablecard.
Question is, just how are you supposed to scan cablecard channels ?

I did select the HDHR ones and enable them, and disabled the old QAM ones, then a scan does a instant update, but those are pretty much the same channels as I had before. (ie, local broadcast ones)
Do I have it correct that it reads that info from the silicondust HDhomerunprime setup program, and that is it, or did I miss something ?

There have been reports that we can (& have been able to for months & months) get Channel Nine from Aus on Optis D1, refer Lyngsat image attached.... but what is needed in the tuning ini for QPSK (if it's possible at all)?? I have tried all the options as in the D1-S2 test ini by just changing it to 12381 but it finds zilch.

Hi, things seem to be going well here so far. I am just wondering though if there might be a way to adjust the Windows priority of the NPVR recording process (nrecord) from within NPVR.

I have been able to accomplish this with simpler programs in the past by just incorporating the Windows "start /abovenormal" command in my shortcut, but in this case there might need to be more of a hack, considering that there are multiple processes running in the background.

Chris

I'v discovered two minor bugs, not sure if they are new to 3.2.9 thou.

1. If you watch an in-progress recording at the catch-up point and then stop, npvr says that you have watched this recording to completion and asks if you want to delete it, even thou it is still recording.

2. If you import recurring-backup.xml with a non empty database, all your recurring recordings will be recorded double from the next epg update. There really should be a duplicate check in the database, at least for recurring recordings.

Note : This is repeat of the posting NRecord Crsshing so that it will be searchable.

NRecord crashing with last message “FindFilterByName failed to locate filter: NPVR Net Push Source”

Attached are two logs and two sets of Windows Event Log entries.

On 11 May there was to be two recordings at 1700 and two recordings at 1730. NRecord crashed at 1700. I restarted NRecord at 1751 and the two 1730 recordings started without error. Although there is no log entries for FindFilterByName success, all of the successful recordings have a message “Removing filter NPVR Net Push Source”

I had suspected that Bitdefender AV+ was involved somehow but there is no events in the Windows Event Log or events in Bitdefender that it has been involved.

Hi chaps.
I am running xmbc on my windows 7 ultimate 64bits PC and have been struggling to use live TV and set up NextPVR 3.2.9 in XMBC (Gotham version).
First and foremost do I need a PCI tuner to receive TV channels in XMBC so I can watch live TV?
I have TV catch up addon on and can see UK freeview channels. How can I get them to be recognised by NextPVR?
I have a list of TV channels in a strm file can they be included in NextPVR?
What I have done so far is: Downloaded NextPVR 3.2.9 and installed the program under administrator.

I went to devices and it recognise my xmbc program. So I highlighted it and pressed OK.
when Web server is enabled and "act as client PC" is ticked.
In XMBC I can see on top a message saying: PVR manager is starting up - Loading channels... from clients. Afterwards when I select live TV I have a menu on the right hand side with no TV channels and in the system tab under system info I can see that the PVR service appears with the following PVR service information:
CLIENT NUMBER 1 OF 1
PVR backend 127.0.0.1
Version 1.0
Address connected
Disksize total 0 gbites
Channels 0
Recording 0
Upcoming recording 0
In NPVR I have the following message: server database not found at: hushpc/npvr/npvr.db3.
When I untick "act as a client" nothing happens.
What am I doing wrong?
Many thanks for your help.
Marty

I cannot press fast forward (set to skip forward instead of fast play) more than a few times without the video freezing/stalling, then eventually (after 1 - 2 minutes) returning to the recordings menu and stating that the program was watched to completion and would I like to delete it?

I've tried almost every combination of video/audio decoders, run the source file (I have 4 recordings I've tested this with) through ts doctor (no video errors but 2 audio errors), updated my video card drivers to the latest version, and even disabled the audio decoder entirely to attempt to isolate the issue. It almost always freezes around 1.5 minutes into the program.

What else should I try? I'm running a clean install of 3.2.9. Log attached.

I am having difficulty getting NextPVR working. It will not record or play live TV. WMC is working fine. I make the appropriate change in HDHomerun to point to the NextPVR app, but I just get a black screen. I have attached my log files. Any help would be greatly appreciated.