First of all, thanks for this product and forum. I've been able to solve a lot of my problems by reading the threads already.
Executive summary: Fully up and running. Forced to use LAV instead of the more highly regarded FFA and/or Cyberlink decoders, leading to slowdowns and reduced performance. Trying to get one of the latter two decoders up and running.
I have NextPVR 3.1.1 up and running well on my HTPC (more than enough machine to run it).
Like many people, I had the black screen issue with live TV early on. I was able to fix it by moving to the LAV video decoder. From there I was able to get up and running in XBMC as well. My only problems are extremely slow channel changes and buffering issues in XBMC.
One of the main suggestions that seems to be a theme both here and elsewhere is to get rid of LAV for a better performing decoder.
First I tried FFA--that gives me a black screen. I also used some detailed instructions to install and get access to the Cyberlink PowerDVD decoder. Regrettably, that also produced a black screen in the Next PVR App.
Any suggestions would be greatly appreciated.
PC: Intel i5 w/ 6GB RAM
OS: Win 8 64
Source: HD Homerun ATSC w/ OTA antenna (set up to output ATSC instead of HDHR in the HDHR settings)
First off I am new to NextPVR, but not to PVR software (SageTV and clients used daily) or XBMC (Still use old chipped original Xboxes).
But Google purchased SageTV (so expansion is difficult), and with the PVR add-on for XBMC, it finally seemed like it was time for a 'One Box to Rule them All' media center.....
So I just got a new box up and running with NextPVR backend using HDHomeRun DUAL tuner and a DB8 antenna for North American ATSC.
Got the guide data working via schedules direct and currently have the standard PVR Add-on (sub's flavor) working in XBMC 12.3 on a front end box.
It all seems very, very close. Nice job by all. When / If I get this stable enough to roll out to the family I will definately donate. (And sell my SageTV clients).
Why this thread topic? From the sticky...
Quote:
Why would I use X-NEW and not sub's XMBC addon?
you really should try sub's plugin first
navigation support for recordings in progress
you mainly use NextPVR and NMT client and you want to share resume bookmarks.
your XBMC doesn't support Frodo, tested on OpenElec, GeeXBox and XBMCbuntu live
Quote:you really should try sub's plugin first
It's quite impressive.
Quote:navigation support for recordings in progress
One heavy usage pattern I have with SageTV, during NFL season, is to start a recording at 1:00pm (and pad it an hour) and start watching it about 2:30-3:30pm. This is before the recording's scheduled end time so the file is not 'complete' in the server's OS file system - but it streams just fine anyways. In initial playing with sub's flavor PVR add-on I noticed that (appears to me anyway) the recording must complete before they become available / visible in the 'Recordings' area of the XBMC client. Does this bullet point mean that with X-NEWA I can do what I described I do with SageTV?
Quote:you mainly use NextPVR and NMT client and you want to share resume bookmarks.
Along time ago I investigated XBMC's mySQL features to enable multiple clients to stop / start / resume in coordination (SageTV has this feature). Does this bullet point potentially mean that I would not have to install mySQL on my backend? But this comes out-of-the-box with X-NEWA? Sure sounds like it.
Quote:your XBMC doesn't support Frodo, tested on OpenElec, GeeXBox and XBMCbuntu live
I was planning on eventually making clients to replace my SageTV HD200s using the future favored Intel NUC boxes - which seem to have a lot of love in the OpenElec crowd. And I assumed I would run OpenElec on them to save $ vs Windoze boxes. Does this bullet imply that sub's NextPVR add-on CANNOT run on anything but XBMC (Windows) Frodo 12+. ? If so that had escaped me in threads that I had read.
1. the ability to capture in HD, as in 16x9 at at least 720 vertical
2. The only capture source will be either s-video or component, and audio needs to be rca red and white. I just need to hook into the back of my iptv box.
What is the minimum card that will do these things on NextPVR? As in exact part number. The hardware list given on this site states the Hauppauge 1250MCE. Well I can't find no MCE, but plenty of 1250's, like this
Thanks
PS does anyone else find it less than intelligent that vBulletin has one section called My Profile, that has some editable fields and just shows you your signature, and then you have to know to find Forum Actions, General Settings to actually edit it?
Hi I know that IPTV was removed in 2.5.9, but I recently lost a sports feed and the only quick way to get it is via access over the internet (http://www.uk-tv.asia/index.php) to BBC1 or similar.
Is there any way to get any one of these services to work with NPVR for scheduling recording playback etc. I got it working on the PC, but it produces stf files?
If so what I do I need to get it working? AN IP address?
I've gathered some info on the batch helper utility NScriptHelper.exe. Unfortunately, my id has expired on the Wiki and cannot add the page to the Utility section. If someone has the time and access, here is the content I was planning to add:
NScriptHelper.exe is a helper utility which is part of the core NPVR package. The utility provides a command line (i.e. batch) interface which can query the NPVR recording service. The executable can be found in the NPVR executables location.
Below lists the functions and calling syntax as of NPVR 3.1.1
-------------------------------------------------------------------------------------------- NScriptHelper -Description filename
- Output description of recording from the EPG
Ex:
c:\Program Files\NPVR>NScriptHelper -Description "d:\pvr\Recordings\Revolution\Revolution.S01E11.The Stand.ts"
2013-03-25: Miles leads the rebels out of Philadelphia and away from Monroe's machine guns; Rachel is forced to leave her children behind -- again -- as she provides power to the rebels.
-------------------------------------------------------------------------------------------- NScriptHelper -Cancel oid
- Cancel recording with specific OID
-------------------------------------------------------------------------------------------- NScriptHelper -Pending
- Output list of pending recordings
Ex:
c:\Program Files\NPVR>NScriptHelper -pending
3089 534 2014/02/01 21:00:00 Black Sails
3087 8 2014/02/03 20:00:00 Almost Human
3091 10 2014/02/04 20:00:00 Marvel's Agents of S.H.I.E.L.D
3092 8 2014/02/06 21:00:00 Rake
3093 62 2014/02/08 18:05:00 The Walking Dead
3090 534 2014/02/08 21:00:00 Black Sails
3094 62 2014/02/09 21:00:00 The Walking Dead
3088 8 2014/02/10 20:00:00 Almost Human
-------------------------------------------------------------------------------------------- NScriptHelper -Title filename
- Output title of recording from the EPG
-------------------------------------------------------------------------------------------- NScriptHelper -SubTitle filename
- Output the subtitle of recording from the EPG
Ex:
c:\Program Files\NPVR>NScriptHelper -subTitle "d:\pvr\Recordings\Revolution\Revolution.S01E11.The Stand.ts"
The Stand
-------------------------------------------------------------------------------------------- NScriptHelper -Rename srcFileName tgtFileName
- Rename the recording in the EPG to new name(location)
Does NOT move/rename the actual file, only updates the database.
-------------------------------------------------------------------------------------------- NScriptHelper -Delete filename
- Delete the recording in the NPVR database
Does NOT delete the actual file, only updates the database.
-------------------------------------------------------------------------------------------- NScriptHelper -isRecording
This function does not seem to work, always returns NOT RECORDING
Ex:
c:\Program Files\NPVR>NScriptHelper -isRecording
NOT RECORDING
-------------------------------------------------------------------------------------------- NScriptHelper -isInUse
- Display status of tuner (Recording or Not Recording)
Ex:
c:\Program Files\NPVR>NScriptHelper -isInUse
RECORDING
c:\Program Files\NPVR>NScriptHelper -isInUse
NOT RECORDING
Been running the old GBPVR for years but having moved house, have taken the plunge to update to NPVR
As with my experience when first installing GBPVR, things aren't quite going to plan.
I have a BlackGold DVB T & S tuner and it scans & finds channels ok. Having reduced the channel list down to those I actually want, I've checked they're all set to OTA EPG update. If I manually update the EPG, it gets populated as you would expect. A day later after the auto-update has run, the EPG is empty :confused:
I've checked the log and there are no error messages showing, indeed the extract below is an example of what I see for all channels:-
Hi all. Newbie to NPVR. Have been using the Homerun for a few years with WMC just fine.
But I am switching to NPVR. I have the latest software and firmware for the home run and am running the latest NPVR software.
When I scan for channels on both the ATSC and QAM sides of each tuner, I get no channels back.
I get 50+ channels just fine via WMC. When I check the log files, I see the below log for each channel being scanned.
The things that stick out are:
Unable to get IKsPropertySet interface and Unexpected error on ATSC put_TunerRequest: 0x8000FFFF.
Also the log says signal strength = 0. Yet when checking signal strength from WMC - i get excellent strength.
Any ideas? Thank you.
2014-01-31 14:20:11.713 [DEBUG][1] Frequency has changed, so stopping recording from previous frequency. (Handle 209)
2014-01-31 14:20:11.713 [INFO][1] Setting locator to BDA_MOD_256QAM
Martin, as requested here are a few comments on v2.1.5 running under Windows and Openelec, some of which have already been mentioned:-
The Web client looks very good and only slightly slower than normal NextPVR menus but âExitâ not working means the power button is only way out in Openelec.
The absence of âSkipâ in X-NEWA and the web client is a major loss for me. I gave up trying to get Comskip to work reliably when I found that four skips forward works to skip the adverts for most channels. Having to use Fast Forward to avoid the adverts is a pain!
From my normal viewing distance (9ft 6in) I donât have a problem reading text in the default NextPVR menus but the text used in X-NEWA is smaller and I have difficulty reading some. The menu on the left is OK but is âa bit smallâ. The text used on the panel to the right is a little smaller so only just readable but the scrolling text used for the programme description is more difficult to read even though it seems larger. Part of the problem may be the poor contrast because of the grey background.
âSaveâ under "Settings" does not seem to work so have to make permanent changes under âAdd-on Settingsâ instead.
I have not been able to get the built in WOL to work so have installed the Advanced WOL add-on.
While navigating or displaying the X-NEWA menus the server does not see itself as "in use" so it goes to sleep. On the NextPVR client just having NextPVR running prevents the server going to sleep. Mounting a server directory using XBMC file manager does prevent the sever going to sleep but only for about 90 seconds after the last action.
Equipment:- Vista NextPVR server, XP NextPVR client and XBMC client, OpenElec XBMC client, Vista Client. Different versions of Windows may behave differently!
I'm trying to set up a recurring recording based on a wildcard and found this while searching:
sub Wrote:You can probably do a manual record, set the type to 'Daily', and set the Advanced Rules to something like:
title = 'College Basketball' and description like '%Duke%'
Is this still applicable? I tried doing this, but I am not seeing 'Advanced Rules' options in the web gui. Also, it seems that you have to choose a channel for manual recordings. Can this be set to 'All channels'?
I'm just getting started with imagegrablite. I see that it has functionality for moving files from the live tv folder. What I would like to do is have imagegrablite rename my recordings and then move them to my NAS for use with XBMC when the NPVR server is sleeping. Can this be done? If so, will NPVR also honor the 'record x number of episodes' settings for additional recordings? Does NPVR database get updated with the new location of the files?
