Hi,

I've used the EWA (build 81) for some time to schedule recordings on my GBPVR server from other PCs on my network. I also access the EWA remotely when away from home (via the internet).

When I'm on my local network, I'm not prompted for a user/password but when I'm remote, I have to enter the User & password I entered in the GBPVR config page. ok so far

I prefer to use Guide2 which works fine when I'm on the local LAN but refuses to let me log-in when I'm remote.

To be precise, If I use guide.aspx in the URL during remote access, I get prompted for user & password and when entered, I get the normal 1st EWA listings page.
If I use guide2.aspx, I get prompted for the user & password but when I enter them, I get an error saying I've entered an invalid User or password and the page resets to the login page.

Should I be able to log-in via guide2.aspx remotely?

Hi,
Suddenly my Programs in EPG are scheduled on the next day.
What am i doing wrong?
I'm using XMLTV to update EPG.

Thanks,
EddiCamaro.

I have 2 cable boxes I want to use. One has RCA outputs, and one only has Coax channel 3/4 output.

Can I set up my Hauppauge 500 to use these 2 boxes? If so, how?

Currently I only have 1 capture source set. It's for the Haup 500, Capture Device #1, Fixed Channel External tuner, tuning Cable, channel 4.

I might try other board numbers. Because I have a Haup 150, but I haven't connected it to anything yet. (That'll be later.)

using xp with sp3. comcast cable in california. cannot get gb to complete scan of channels when trying to map. always freezes at 541250.0. i've turned off firewall etc. any suggestions would be appreciated. logs are attached.

I'll be stepping up to Windows 7 in the next week or two.

Changing from XP Home (32 bit) to 7 Ultimate (64 bit), so it will be a fresh install.

What gotcha's will I need to be on the lookout for?

In windows 7, will I need to specify a login? (currently I have the mvpmcx2 scripts using the guest account in XP)

Any special permissions I need to give gbpvr?

Thanks in advance.

It's a long story and I won't bore you with it In full. So short version...

After conversation with Blader it was suggested that maybe Wiki could get skin overhaul.

After seeing Hairy's new front end webpage did a mock up entirely based on his look and feel.

So this is nicked from him, completely!

This is mock up of new skin for wiki, just done in photoshop. Everything remains content and layout wise the same, just a new look?

Comments? (But only positive!!!)

Have I missed anything you would expect to see on the homepage??? Even though didn't put any homepage detail in....

Cheers

#Steeb

This is odd, I set it to record a clearQAM channel, and this time around, I left the default quality level be medium. I know that setting isn't supposed to do anything for digital recordings, however, in this case, it produced a .ts file that is 704 x 480 1,206,745,680 bytes for a hour show.

The issue is, when using VLC to play it, it doesn't show a duration at all. It has 0:00/0:00, but it IS the full hour show.
Using a different player, it shows 10:43 as the length.
AVIcodec shows:
Video : 1.10 GB, 14821 Kbps, 29.970 fps, 704*480 (4:3), = MPV Decoder, Supported
File : 1.12 GB (1.12 GB), duration: 0:10:43, type: DSH, 1 audio stream(s), quality: 98 %

the other show I record (different station) with a quality setting of high, had:
Video : 1.24 GB, 2944 Kbps, 29.970 fps, 1920*1080 (16:9), = MPV Decoder, Supported
File : 5.41 GB (1.41 GB), duration: 1:00:47, type: DSH, 1 audio stream(s), quality: 98 %

Any ideas why the duration got screwed up?

This is using TS Mux on windows 7.

I'm using a Kworld ATSC-330u. I just want to use the program to watch over the air, HD channels. I went through the configuration files per the instructions and mapped serveral over the air HD channels. I tested them in the little window and they work fine (except there's no sound). But when I close the configuration program and open the PVRX2 program and select LiveTV, nothing happens. My operating system is Windows 7 Evaluation copy Build 7100. Thanks for any help.

I'm getting the "request cannot be processed" error when I use the GB-PVR via Network Browser" option. If I use the first option of "GB-PVR" the GB-PVR menu displays. I'm using the default skin, but it displays in the top left corner of the screen with the left margin cut out. But it works to the point that I can play recordings or watch live tv, but anything I play stops and turns black after about 5-10 seconds. I can then press return, choose something else to play, with the same result.

I read the sticky about "request cannot be processed", and some other threads that deal with similar symptoms. But I haven't been able to solve the problem. I used mvpmcx2 following the dummies guide.

Some history: I'm running windows 7, 64 bit, with SD HDhomerun tuners. PCH A-100 can play GB-PVR recordings through a smb share of the c:\Temp dir. I've run NMTInstall.exe several times, with different results each time. Initially, using the default skin, I was able to play and record normally, and I had access through the Network Browser option. The only problem was the menu display I mentioned above. So I ran NMTInstall.exe again and chose the the mayhem3 skin. This resulted in VERY slow response times, almost unreadable menus, and nothing would play. So I ran NMTInstall.exe again choosing the default skin, and response was fast, but still no playback, putting me in the current situation I described above.

So I'm stuck. The guide says to run from Network browser. Does it matter? Is the first choice of GB-PVR viable, or is it mandatory to choose via Network Browser?

I'm posting logs with this, hoping that will help. The first attempt is with the windows 7 firewall on. Playing the recording resulted in an immediate black screen. The second is with firewall turned off. Playing the recording resulted in a black screen after about 10 seconds.

I appreciate any direction you can give me.

How do I invalidate the baseline screen background rectangle to cause incremental update to do a full update? ML3 overlays the background with images and lists and sometimes as the views are changed the old screen appears under the list boxes. If there are enough changes to force a full update the normal background is shown.

Martin