Hi all
I think there is a config problem in the last version of gbpvr.
If i delete one tv card from source and i try to add the same one, after the setting when i try autoscan on the screen appear the title message.
I suppose that the program doesn't delete the deleted card setting.
I have a 16x10 monitor (1920x1200) and select Television Shape Widescreen (16x10) in GB-PVR.
In 1.3.11 I used to get small black bars top/bottom of a live TV window - and the picture looked correct aspect ratio wise.
In 1.4.7 I now see a picture stretched to fill the frame (no black bars, incorrect aspect ratio). Playing newly recorded .ts files with VLC they still have the correct aspect ratio - they're just wrong when playing them through GB-PVR.
I don't often play recorded .ts files through GB-PVR, but thought it was worth mentioning ...
I have just downloaded GBPVR and am trying to get it set up to receive Freeview, Freesat, some channels from 19.2E and the MPEG4 DTT service from the ROI.
I have tried to set up the DVB-T side of things but a scan is not bringing anything up. I have went through the sticky with the walkthrough and checked the settings and they are what i believe to be correct but a scan still finds nothing. Can anyone offer any help?
Also, I would like to set up my dish which is on a Diseqc for 28,2E and 19.2E. I notice too that Eurobird is set up as a seperate satellite too, so do I have to then set up 3 different tuning parameters for each satellite or is there a setting that will do at least the 28.2/28.5 in one?
New user, new installation (1.4.7), new computer (Vista 64 SP1 Pentium dual core E5200, 4 GB ram) dedicated to media center use.
Finally got the latest version installed and working, mostly satisfactory, except that intermittently, the wireless USB devices stop working. I've got a Diamond "All-in-Wonder" setup which comes with an IR remote, one with a green button, so I've supposed it's an MCE remote. It works with GBPVR without any other plugins. I also have an IOGEAR long-range keyboard/mouse that I use with the computer.
Several times over the past couple of days, I've had to restart the computer when trying to change sources. The MCE remote stops working (can't get to menu to exit), although the receiver is still seeing a signal (well, it blinks). At the same time, the keyboard/mouse stops functioning, so I can't do anything other than a hardware restart. It's more of an annoyance than a real bug, but it's happened often enough that I figure somethings not wired in quite right.
Per the "guide" I'm posting logs for expert review.
I'm otherwise absolutely delighted in the performance and features of the package, and appreciate all the hard work that's gone into bringing it to this advanced stage.
I use the IR Blaster to change channels on a General Instrument (Motorolla) DCT2500 set top box on Shaw cable. My problem is that this works unreliably, about 5% of the time the channel change request fails as it switches to the wrong channel.
I use code set 0081 and have GBPVR set to always send 3 digits. Whenever I test manually, the channel changes work fine but through GBPVR they fail 5% of the time as "005" appears to get interpreted as "00", "043" is taken as "04" or "127" is taken as "27", etc.
I've played with the IR Blaster "Advanced Configuration" a bit but as I can't reproduce the problem I never know if I've solved it until it fails again. Has one had a similar problem and came up with a solution?
Config.exe hangs when I try to exit normally. I can cancel, but when I respond OK it just gives me Vista's circular hourglass symbol.
The last line in Config.exe.log is always a simple:
Code:
2009-09-07 08:21:17.576 INFO [1] Config is saving settings
The last lines in Config.exe-native.log is always :
Code:
2009-09-07 08:29:04.027 VERBOSE FindFilterByName failed to locate filter: ATI MPEG Multiplexer
2009-09-07 08:29:04.037 VERBOSE FindFilterByName failed to locate filter: InterVideo Multiplexer
2009-09-07 08:29:04.052 VERBOSE FindFilterByName failed to locate filter: ShowShifter MPEG PS Writer
2009-09-07 08:29:04.062 VERBOSE FindFilterByName failed to locate filter: MainConcept (Hauppauge) MPEG Multiplexer
The title bar shows (Not Responding). Eventually I hit the red X and tell Vista to close the program. I'm not sure how long this has been going on, but I usually just open up config.xml or gbpvr.db3 and do it manually.
I've tried disabling plugins, without any improvement. Suggestions would be welcome!
Hi,
I have a question about gbpvr mux mpeg2.
On my mediacenter previously there were installed:
haali media splitter
saf 4.0 beta 9
gbpvr 1.47
there are 2 tv cards:
Hauppauge hvr-1300
hauppauge hvr-3000
The problem was, if i tried to watch some channels like k2 in italy or others i could watch video but couldn't listen audio. i tried to modify mpeg audio configuration like ffdshow but without success.
The only way to obtain a good result was install elecard driver from dvbprog installer after that all channels are with audio and video.
Why had i problem without elecard?
Elecard is a good mpeg2 mux but there is always the logo on the top right side on the tv and i don't like it.
anyone have any recommendations for windows web hosting?
i would like
- server 2008 (for iis7)
- url rewrite module installed for iis7
- sql server 2008 (multiple dbs)
- ability to host 3 websites or more
- lots of bandwidth a month (unlimited would be nice, but not needed)
- fast
cheaper the better, but i dont mind paying a few dollars more for a better host.
my current one is far too expensive for what it is
I'm using the Hauppauge 1800 card and I went through the steps without an issue until I got to the mapping part. The live TV box shows the first channel, and it lets me map it, but when I click to the next channel it hangs the program and I have to close it to get it to work again. I tried some other programs trial without an issue, but I'm stumped on why this is occurring.
![[Image: IR_Blaster_Config_20080913_02.gif]](http://members.shaw.ca/David.Williams/IR_Blaster_Config_20080913_02.gif)
