So I have a problem with the syfry channel. I read the few posts on other peoples problems for when they did this, and thought I had fixed it as well.
Or at least had it livable. I got the old scifi and new scyfry channel listings together in the guide. Scifi still shows no entries, but that was okay, I got the new one to show and play properly.
Originally it played a different channel.
After I moved it in the list to the same channel, it played the scyfry channel correctly.
A day or so ago, I go and watch a recording, and it is the old wrong channel again. I verified the listing and it still shows it in the correct order.
So in doing that, it restarted gbpvr. I go to watch again, and it is now the correct channel again.
So the next day I check and it is still good, thinking the update might have messed up the channels.
When I got home from work, I checked again, and now it is the wrong channel. I know it wasn't doing any updates for the guide at that time, so I am stumped.
Right now since the two channels are listed next to each other in the guide, I just set up manual recordings in the no description list above so I can catch my shows.
Is there something else I can do to clear this up?
Is this where I need to do the DB wipe to start over again?
I am new to all of this and not all that good with computers.
I have tried lots of different things now and still can not make the system work properly. I seem to be able to get ether live TV or recording working but not both at one time. I am using windows 7, gigabyte 9500 GT, pentium 5200, PVR-2200. I also have a nova T 500 but have not started playing with that yet.
At present I have recording and play back working really well but get no image with live TV.
I am setting up a new pc to run GBPVR on, but get errors when installing gbpvr.
I have installed dotnet 2 and then began installing.
Part way through the install i get the following:
ERROR 1904:Module c:\program files\devnz\gbpvr\gbpvrwriter.ax failed tto register. HRESULT - 2147010895
abort retry ignore
Whe i choose ignore then psiparser fails to register. This continues with every file thereafter.
No antivirus installed yet. I switched off windows firewall.No success.
Windows XP Pro sp3
I installed a fresh copy of XP SP3 and the latest version of GbPVR. I went through and did the setup, I have a dvico HDTV5 RT Lite card. It went through and found all my aerial digital channels. But when I run GbPVR when I lick on Live TV, or TV Guide, nothing happens. I know the tuner card is working because I can open it with the Dvico software. Thanks, Im new to this!
New to gbpvr, I need some help with channels (germany).
My config:
Win XP SP 3
GB-PVR v1.3.11
Hauppauge NOVA-HD-S2 (detected as HVR 4000); digital recording
The automatic scanning process found more than 1000 channels some are listed as "unknown" though. I am able to view, hear (and record thru the common and the web-client) some channels.
But the popular german SAT1, RTL (Super-RTL) and ProSieben channels are missing (though the software that was included (CyberLink PowerCinema) has found these channels).
And funny thing is that their AUSTRIAN counterparts are shown...
GBPVR version
Operating System (also specify 32-bit or 64-bit)
Windows Media Player version
Codecs and codec packs
h.264 Decoder used in GBPVR config
Video card
Video card driver version
I've seen a post a while back stating that patches for PowerDVD will disable their decoder for 3rd party apps. Is this still the case? Is it safe to get the latest version of PowerDVD? I see that you can buy a decoder pack separately here:
Problem: Volume is very low when playing a file in GBPVR. When playing the same file in GraphEdit (render media file) or in Media Player Classic Home Cinema it is very loud.
System: I send audio via SPDIF coax to my amp. The SPDIF coax connects to the motherboard, and it uses Realtek HD Audio Manager set to 5.1 audio
PVRX2: I have tried setting audio renderer, audio decoder and AC3 decoder in config to system default.
Here is what the log says about filters used when set this way:
Code:
2009-07-18 08:39:55.314 VERBOSE Graph contains the following filters:
2009-07-18 08:39:55.314 VERBOSE - Default DirectSound Device
2009-07-18 08:39:55.314 VERBOSE - Video Renderer
2009-07-18 08:39:55.314 VERBOSE - CyberLink Video/SP Decoder (PDVD7)
2009-07-18 08:39:55.314 VERBOSE - AC3Filter
2009-07-18 08:39:55.315 VERBOSE - E:\GBPVR\Recordings\A Funny Thing Happened on the Way to the Forum(1966)(TV-14)(5 stars)\A Funny Thing Happened on the Way to t
2009-07-18 08:39:55.315 VERBOSE getSetting(SaveGraphFiles)
This has low volume.
GraphStudio renders the file and plays it loud using 4 filters:
- AC3Filter
- Default DirectSound Device
- CyberLink Video/SP Decoder (PDVD7)
- Video Renderer
This looks the same to me, but if it is, why is the volume so much lower?
My normal setup for GBPVR uses these filters:
Code:
2009-07-18 08:31:37.480 VERBOSE getSetting(ListGraphFilters)
2009-07-18 08:31:37.480 VERBOSE Graph contains the following filters:
2009-07-18 08:31:37.480 VERBOSE - Video Renderer
2009-07-18 08:31:37.480 VERBOSE - CyberLink Audio Renderer (PDVD7)
2009-07-18 08:31:37.480 VERBOSE - CyberLink Video/SP Decoder (PDVD7)
2009-07-18 08:31:37.480 VERBOSE - AC3Filter
2009-07-18 08:31:37.480 VERBOSE - E:\GBPVR\Recordings\A Funny Thing Happened on the Way to the Forum(1966)(TV-14)(5 stars)\A Funny Thing Happened on the Way to t
2009-07-18 08:31:37.480 VERBOSE getSetting(SaveGraphFiles)
This also has low volume.
My volume setting is Master volume, but I've also tried "none-internal."
Does anyone have any comments about why GBPVR is playing at the lower volume than other programs? 99% of programs are playable by turning the volume up, but then I get blasted when I leave GBPVR.
I have recordings scheduled from HDTV cable qam and analog tv. However, after the QAM one finishes, and the analog one is supposed to start, the file is not created. There is simply an empty directory where the recording is supposed to be. However, if I restart the recording service, the analog recording continues as planned. Is there any way to resolve this?
