1. Can we have the ability to enable/disable specific resources it uses to pull the images from?
2. Can we reorder the order in which the resources check for files.
Mainly because I find that "EP Guide" gives me the best image for a TV series/show, but not any for a movie, etc. the IMDB works best for movies, but unfortunately, I get junk images from IMDB for TV series/shows.
This would give me more flexibility to get the images I want.
I use the HD-PVR to record off a dish network box and I have noticed that at the beging of the recording it freezes and jumps a bit during the channel change, also when watching the HD-PVR the recording light turns on and off when the channel change occurs. I am using the optical on my dish box and I have noticed looking at the comskip logs that there are a bunch of audio errors at the begining of the file, in addition I have noticed that the dish box on my surround sound receiver also loses the audio signal during channel changes so I am sure its the audio that is the cause of symptoms.
So now to my request, is it possible to have channel changes happen before the recording starts by about 10 to 15 seconds to avoid this problem, I think it might be causing comskip issues since comskip isn't working at for recording off the HD-PVR.
Thanks
UK Freeview has a number of channels that are only broadcasting at certain times of the day. Currently you need to run a scan during the broadcast time-slot in order to add these channels to GB-PVR. This can take a few days, especially if you have multiple tuners. It would be great if GB-PVR could pick up these channels while scanning like the Freeview STBs do.
Disclaimer: wish made with no idea of the work involved in adding this functionality
So. My cable provider has decided to shutdown the analogue services which finally forces me over to digital...
The digital service is subscription only, so, after reading a few threads here, and some googling, I've got a couple of questions before I rush ahead and buy stuff:
1. If I'll use the MultiDec plugins (and a card reader), do I need a tuner card with CI/CAM or is that just unnecessary?
2. I know the analogue cards convert the signal to mpg2 internally, but how does the digital cards work? I've read a lot about .ts files but that is the raw data, correct?
3. What would be the computer minimum requirements if I have two digital cards? Does it even matter much?
4. Any recommendations on what DVB-C tv-card to get? Since it's digital I'd imagine that the difference in image quality between the cheap and expensive cards is a bit less than for analogue cards?
Been a loyal GB-PVR user since 2005 and I've read almost all the treads before posting this one.
Several weeks ago my GB-PVR guide stopped updating from my EPG XML source: yapi2xml
I've tried various solutions including a fresh install of both applications, registry cleanups, etc...
Yapi2xml is downloading and it looks like pvrx2.exe is updating (I have yapi2xml write the xml file to the root to insure it's not a path issue). I update within config and within pvrx2.exe and still nothing.
Code:
2009-07-16 21:24:27.375 VERBOSE [5] Existing channel: NYCTV73
2009-07-16 21:24:27.375 VERBOSE [5] Existing channel: NYCTV74
2009-07-16 21:24:27.375 VERBOSE [5] Existing channel: DHC
2009-07-16 21:24:27.375 VERBOSE [5] about to save listings
2009-07-16 21:24:27.765 VERBOSE [1] labelAction.Text = Saving new listings and channel information
2009-07-16 21:24:28.484 VERBOSE [5] Informing recording service that EPG has updated...
2009-07-16 21:24:28.484 VERBOSE [5] Emptying Zap2it/ScedulesDirect channel cache
2009-07-16 21:24:28.765 VERBOSE [1] labelAction.Text = Saving new listings and channel information
2009-07-16 21:24:29.828 VERBOSE [1] getValue() loading new key/value into cache: /settings/PreferredSubtitleLanguage
2009-07-16 21:24:29.828 VERBOSE [1] getValue: /settings/PreferredSubtitleLanguage : eng
2009-07-16 21:24:29.828 VERBOSE [1] getValue cached value: /settings/TvShape : 16x9
2009-07-16 21:24:30.968 INFO [1] Config is saving settings
2009-07-16 21:24:31.031 INFO [1] ...saving to disk
2009-07-16 21:24:31.031 INFO [1] ...saving custom takes
2009-07-16 21:24:31.031 INFO [1] ...updating channel summaries
2009-07-16 21:24:31.171 INFO [1] ...saving capture sources
2009-07-16 21:24:31.187 VERBOSE [1] Saving DirectRecordingSource
2009-07-16 21:24:31.203 VERBOSE [1] Saving XmltvConfiguration
2009-07-16 21:24:31.234 INFO [1] ...stopping service
2009-07-16 21:24:32.484 INFO [1] ...stopping service
2009-07-16 21:24:32.484 INFO [1] ...starting recording service
2009-07-16 21:24:32.484 VERBOSE [1] getValue() loading new key/value into cache: /settings/AutoStartServiceOnConfigExit
2009-07-16 21:24:32.484 VERBOSE [1] getValue: /settings/AutoStartServiceOnConfigExit : true
2009-07-16 21:24:32.609 INFO [1] ...done
But still when I go into the guide I see "(no show details)"
Any ideas would greatly be appreciated as it's been weeks since I've been able to use GB-PVR
I just got a new DirecTV box so I am having to go from serial control to IR blasting with the MCE 2005 blaster. I installed and setup Hip with the MCE 2005 remote and I also had HIP learn the IR commands from the DirecTV remote. I then successfully tested the IR with HIP, the blaster would light up and the channel on DirecTV would change. However when using HIPsend the IR blaster does not light up and the channel does not change. What am I doing wrong or failing to set up?
I have (had) a completely functional GBPVR setup. I could record and watch HD and SD tv shows just fine. Then last night, I returned and found that I can no longer play recorded HD tv shows without major stuttering!
I hadn't changed any decoder settings. The files themselves are fine and play back without stuttering in VLC, just not in GBPVR or in Windows Media Player. I can watch HD TV shows without stuttering. The only things I can think of that changed between last night (when HD playback was working) and now is that I installed the most recent batch of Microsoft updates and that I checked off the deinterlacing option in the Nvidia Control Panel (I unchecked it just now to see if that was the cause of the stutter, but no dice). The stutter is such that both video and audio are stuttering and the GBPVR interface becomes less responsive (it takes a few tries to Esc/right click back out of the playback view).
I seem to have a lot of dormant entries in my gbpvr.db3 when I look at SQLite, and most of them seem to be from channels that I no longer watch (Unchecked channels in the Config).
Is there some way of flushing the database so that only entries which are valid for current channels, as well as existing recodded shows, are retained?
There are about 3133 entries in the db3 database, which seems a lot for 4 channels, 1~2 weeks epg max. Some I know are not assocaited with those channels.
k.
Having some audio/video sync problems after uninstalling & reinstalling GB-PVR 1.3.11 (no/minimal problems before, now much more noticeable). Audio is typically .25-.5 seconds ahead of the video.
I've tried out several different audio/video codec combos for playback, but nothing really makes a difference. This occurs within GP-PVR and with WMP during playback of ATSC (Live digital TV) content. Video is recorded using DVR-MS (TS used to give me huge problems, so haven't even bothered w/ this install)
I'm not really sure what else I can try aside from what I've already tried w/ the codecs...any suggestions would be very appreciated!!!
