On Friday 3/6, I set up a couple manual recordings. I went with manual because I was going to be out of town and I was not sure how the system would react to the DST change. I basically wanted to setup to record ch 7.1 and ch 9.1 from 6PM to 11PM on Sunday 3/9. I have a dual tuner HVR 2250 so this is normally not a problem. While doing these manual records, I realized that I had accidentally set the 7.1 recording to 6AM-11AM. I selected the recording and used the Update option to set to 18:00-23:00.
When I got back on Sunday evening (around 9:45) I noticed that my recording for ch 9.1 was running (as expected) but the recording for ch 7.1 was not running. I tried to watch the recording and got just a blank screen. I went and looked at the TS file and it was only 600KB large.
I'm by no means an expert at looking at my log files as I've only been using the software about a month, but it looks to me like both programs were set to record using tuner 2. Since I had originally entered the wrong time for 7.1, this would have been acceptable, but it appears that it was not updated once I updated the times on 7.1. Therefore, at 6PM, ch 7.1 started recording on tuner 2 and almost immediately afterward, the ch 9.1 recording took over tuner 2. All the while, tuner 1 was inactive.
Anyway, that's what I got from the logs but I could be wrong. They are attached. If I read them correctly, there could be a bug here.
Two recordings from my HDHomerun were corrupt last night (first time I've had problems with this device)
24 recorded at 9PM & was ~6MB. Castle recorded at 10:02PM & was 0
Logs are attached.
Thanks
UPDATE: Noticed this in the logs just before each recording: "Unexpected error checking tuning on back-to-back multirecords"
I forgot to uncheck that when I was playing with multirecord before & since I had gone back to my pre-multirecord setup, I had didn't have the patches in place - was that the problem?
Well, I thought everything was working, but of course it wasn't. Not sure what to do about it, since I have no time to troubleshoot, but just in case its helpful.
Current 1.2.x version has at least once successfully scanned/mapped digital channels along with analogs, and has so has two sources - these are numbered 1 and 2.
I copied that directory (you know, keep a backup) and installed 1.3.11 over it, which it detected as an upgrade and successfully installed.
Installed all the patches per the sticky.
Tried to scan/map digital channels, failed, but it still had the old channels in the map list from the 1.2x scan, so used those to map some digital channels.
Every recording fails (analog and digital). I posted this before - it appears as though the recording service crashes when it tries to do any recording. Possibly the source numbers are off now?
Machine is a core2 duo, 2gb ram, .5TB disk, running XP, Hauppaugh HVR 1600, digital side is QAM cable, wintv gets a boatload of clear QAMs, and 1.2.x records clear QAMs just fine.
I restored the old version, it's working fine (recorded several analog and digital shows last night) but for some reason it to now cannot scan for digital channels. I guess I need to re-install it to have it register something back?
Anyway, I really want 1.3.11 to work, but I've got no time to troubleshoot
I'm trying to install a Twinhan 102g using latest version of GBPVR. When I get to the step of registering mdapifilter.ax, GBPVR nor the Config will open after the registration. Even if I unregister MDAPIfilter.ax it's still hosed?
Hey, I have the HVR-2250 MC-Kit and it came with a Hauppauge MCE Remote + IR Receiver + 2 IR Blasters.
I have tried everything to get the blasters to work, but they haven't (I've tried replacement drivers, different software (IRServer, HIP, EventGhost, Girder). I am done tinkering around with this.
I am at the point now where I am willing to buy a new remote and blasters that will be compatible with gbpvr (maybe a USB-UIRT or something).
Does anyone know of the cheapest solution that will work for me (and will work in 64-bit Vista)?
I am using the blasters to change the channel on 2 set-top boxes. Also, are the hauppauge IR blasters compatible with other IR receivers? Could I just buy the IR Receiver (the microsoft one, for example) and still use my Hauppauge blasters?
I´m trying to get the High Def channels from the Thor satellite working.
I use the latest 3592.ini from Joshyfun but when i scan it doesnt find any s2 channels. I have a Hauppauge Nova HD-S2 card.
I've just upgraded to v1.3.11 and was eager to try out multi record. All seemed well until I discoverd that when I tried to record two specific TV staions (ITV1 and Five) they failed to show a picture when I tried to play them back either during recording or after recording had bee stopped.. In one instance (ITV1) the sound was present. The files had recorded and would play back using VLC but not using GBPVR. Both stations show picture and sound when I watch Live TV and both are OK if multi-record is not enabled. They are not on the same channel (frequency) and other stations on the same channels (frequency) behave normally. Any help or suggestions would be appreciated.
Hi all, my EPG shows the channel names which are in the format:
101 BBC ONE
102 BBC TWO
I want to change them so the numbers are removed:
BBC ONE
BBC TWO etc
I have changed the config.xml file to show 'just names', but I have now found that the names themselves actually contain the numbers too. I can't edit the names in the config.exe either. Stumped.
I spent most of last weekend trying to get iso's to play from Video Library
I have latest Daemon Tools Lite installed along with AnyDVD HD
I can only get this to work by increasing the daemon tools preplay delay to a minimum of 14000 (14 secs) and disabling ballon tips in AnyDVD.
In the slysoft forums there seams to be a consensus of opinion that Anydvd and Daemon Tools are not happy together and to use Virtual Clone Drive (Freeware no adverts or hijacking) It is meant to be compatible with 3rd party software written for daemon tools, but after hours of trying I gave up :mad:
Has anyone got Virtual Clone Drive to work with GBPVR or is there a way to decrease the delay for Daemon Tools to start and still play iso first time. (14 secs = 50 button presses in wife time ) )
Help would be very much appriceated as most things are now working purfectly
) )