I have windows MCE running 1.0.16 and I can see the guide info pannel on the bottom of the screen, and hear the audio, but no video.
WinTV PVR 150
ATI X300
Windows Media Center
problem happens on both gbpvr and pvrx2
Since changing to Schedules direct I have been missing channel 529 TBS from my guide. I just assumed it was a lineup problem, but I have just done an xmltv grab of the raw data and channel 529 with program data is there.
I removed all the EPG data and channel lineup from GBPVR and did an EPG update. The 529 TBS channel appeared in my channel list in the capture source screen and it is enabled. But when I go to the guide, the channel does not appear.
Any ideas? I've used GBPVR for about 2 years and don't remember having this problem before.
But playing the same file through video library works fine!
Thought I had everything sweet:
Intervideo non-css video decoder
Nvidia audio decoder
DVR-MS flux capacitor
Until I tried to play some older recordings - blank screen, no audio, and the PC locked - only option to re-boot.
But the same file plays fine through video library, or if I change the audio decoder to anything other than Nvidia.
Recent recordings are fine, so just curious about this...
Pob
I'm getting poor livetv. It's not jerky but more like "chugging along" like it's wanting to show but like the cpu is over taxed. Thing is that I've checked the cpu (Opteron 165) utilization and it's ~5%.
I did have pure video decoder set and so tried system defaults but that only lost audio.
I'm running pvrx2 16 and output is through 6800GS component. What else should I provide in hopes of getting help resolving this ?
btw I stopped everything and cleared out the logs then tried again so here are the fresh logs.
I have been using GBPVR for a while and have always had to run the Hauppauge Services first in order for the MVP device to aquire the dongle.bin sftware.
I installed tftpd32 on my workstation and configured it for DHCP. It leased an address to MVP but for some reason the MVP unit will not pull down the bin file. Can I push it up to it manually using TFTP? What port?
When the MVP is sending the bootp request shouldn;t the GBPVR service be listening on that port and respond? What port it bootp?
I noticed in TFTP a box for boot file. SHould I have dongle.bin referenced in here?
Firewall is disabled.
Here is the log.
Any ideas.
TIA and thanks for all the input on the previous posts.
Recordings, videos and fotos stopped working, livetv, musiclib2 and netradio work fine.
I get this error in mvp-pvrx2.log:
Code:
2007-10-06 11:11:05.921 VERBOSE [6] User pressed: 13
2007-10-06 11:11:05.921 VERBOSE [6] about to call OnKeyDown()
2007-10-06 11:11:05.921 VERBOSE [6] Key pressed: Return
2007-10-06 11:11:05.921 ERROR [6] Veld niet gevonden: GBPVRX2.BaseButtonListUiTask.mmcModePossible.
2007-10-06 11:11:05.921 ERROR [6] bij GBPVRX2.x2be64c56dcebf65e.initialise()
bij GBPVRX2.BaseButtonListUiTask.Activate()
bij GBPVRX2.MenuTask.xd2a3a83a17aec615.OnKeyDown(KeyEventArgs e)
bij GBPVRX2.MVP.x3ca133dee7547455.x3d75adb3418c5c9e()
2007-10-06 11:11:05.921 VERBOSE [6] MVP sending frame
2007-10-06 11:11:05.921 ERROR [6] handleMVPConnection() exception: De objectverwijzing is niet op een exemplaar van een object ingesteld.
2007-10-06 11:11:05.921 VERBOSE [6] bij GBPVRX2.BaseButtonListUiTask.GetRenderList()
bij GBPVRX2.MenuTask.xd2a3a83a17aec615.GetRenderList()
bij GBPVRX2.MVP.x3ca133dee7547455.x19e39e0d5aeedfb8()
bij GBPVRX2.MVP.x3ca133dee7547455.x3d75adb3418c5c9e()
2007-10-06 11:11:05.921 ERROR [6] handleMVPConnection() exception: De objectverwijzing is niet op een exemplaar van een object ingesteld.
2007-10-06 11:11:05.921 VERBOSE [6] bij GBPVRX2.BaseButtonListUiTask.GetRenderList()
bij GBPVRX2.MenuTask.xd2a3a83a17aec615.GetRenderList()
bij GBPVRX2.MVP.x3ca133dee7547455.x19e39e0d5aeedfb8()
bij GBPVRX2.MVP.x3ca133dee7547455.x3d75adb3418c5c9e()
bij GBPVRX2.MVP.x3ca133dee7547455.xd3faf5962405de4e()
Gbpvr.exe works fine.
Could it be in the latest patch I installed to get netradio working?
Hi sub - before you went on holiday i mentioned the above happening to me in the beta forums - but i think at the time we put it down to xmltvnz having issues - the guide is much better now but the problems still exist - next time it happens i'll post my logs (wife is watching bridezillas right now so cant interupt that !!)
I don't want to sound rude, i was just wondering if there is a time frame when we can expect a new skin. This is such a great plugin that i use all the time, its really wonderful. I was just curious if one was in development at all.
I just love having it all there with my old school NES and SNES controllers hooked up to my PC. Combined with my remote it works like a charm. Thanks for the amazing work you've done.
