How can I restore version 5.0.5?

The latest version 5.1.0 works uncertainly, about 20% fail.

I have started playing with comskip again and have seen a strange error that happens quite often during parallel processing, but NOT during post-processing.

Depending on the show, when comskip is invoked running in parallel, I am seeing "Invalid frame dimensions" errors which eventually results in a zero length edl file.  However, if I run the same show as a post process, comskip works fine.  

Anyone else seeing this?  what could be causing this type of error?

logs & comskip files attached

Attached Files

  Comskip-files.zip (Size: 14.77 KB / Downloads: 4)
  logs-20210223-0909.zip (Size: 51.81 KB / Downloads: 0)

Hi
Can someone recommend which decoders work perfectly in the UK. My channels are all from Freeview and I am using the latest release of Nextpvr version 5.

The problem I am having is that when both live TV and recorded programmes start, the audio is fine but the video lags for about 10 seconds before they both sync.
This also happens when I skip part of the recording.
Please try not to be too technical if possible.
The following are my current settings

Attached Files

Thumbnail(s)
   

Hello,
Having set up NextPVR on a Pi, I can successfully record shows.

However when I try to download a show using the NextPVR web UI I end up with a 0k file named "download".  I can use rclone to copy the file and the file has recorded OK.

 
~/recordings/Den tynne blå linjen/Den tynne blå linjen_20210221_21352234.ts

This appears to be due to the letter å in the shows title.  (å æ ø are standard letters in the Norwegian alphabet)

Here is a section from the log file:

  

I see that some people have had trouble integrating NextPVR with Jellyfin. I did at first but (v4.x jelly) after some tweaks, I didn't. I used M3U and put in the ip address, port, & pin & it all worked. But the only way I can watch live TV is by using a browser, not the android app (Pixel XL with LineageOS). I get a "Playback Error - no compatible stream.
Any ideas?10.0.0.0.1 192.168.1.254

I currently have an HTPC running Win7 WMC and I don't want to mess up my current configuration. If I install Kodi and NextPVR on this system, will they affect my current setup?
I've searched and searched but can't find anything definitive. Has anyone done this and what were the effects?192.168.0.1 routerlogin 192.168.l.l

Guide update only successful after stop/start of NPVR service. After the initial update , the following EPG updates go thru the processes (seems successful) but will not update the Guide. Logs attached including mylog of activities
Thank you... Text of activity

12-02-21 16.00 stopped npvr service, deleted logs, reboot pc, loaded show status, start npvr client (local pc)
16.45 Checked EPG, guide populated to M/Day fri 19/02/21

13-02-21 16.15 Ran EPG update,Toggled thru all tuners except Winfast #1 Freq 226500 (watched status on local pc)
Checked log of device. It did do update. Sorry forgot to take note of inserted/update/skip
14-02-21 11.00 Checked device logs, o/n EPG update succesful.

15-02-21 10.50 Checked device logs. o/n update succesful. (guide populated M/day sat 20/02/21)

16-02-21 08.30 Checked device logs. o/n update succesful. (guide still only populated M/day sat 20/02/21)?

17-02-21 07.45 Checked device logs. o/n update succesful. (guide still only populated M/day sat 20/02/21)??
09.20 Manual EPG update,toggled thru all tuners (watched status) update result i=0 u=0 s=0
09.30 Reboot PC (another win10 update pending)
10.10 loaded npvr client and status, then manual EPG update, watched status no devices used but went thru update process
Result i=935 u=0 s=0. guide populated to M/day thu 25/02/21.
18-02-21 08.45 Checked device logs. o/n update succesful. (guide still only populated M/day thu 25/02/21)
19-02-21 08.30 Checked device logs. o/n update succesful. (guide still only populated M/day thu 25/02/21)
14.30 Stopped npvr service ,started npvr service,load show status,start npvr client.
Ran EPG update, no tuners shown in use. EPG u/date i=9025 u=0 s=58
Guide populated M/N sat 27/02/21
20-02-21 09.25 Checked device logs. o/n update succesful. (guide still only populated M/day sat 27/02/21)
21-02-21 13.00 Checked device logs. o/n update succesful. (guide still only populated M/day sat 27/02/21)
22-02-21 07.45 Checked device logs. o/n update succesful. (guide still only populated M/day sat 27/02/21)
15.15 Backup logs, stopped server,delete logs,restart server (guide populated M/day sat 27/02/21)

23-02-21 07.43 Checked device logs. o/n update succesful. (guide populated M/day tue 02/03/21)
09.15 Backup log
24-02-21 15.30 Checked device logs. o/n update succesful. (guide populated M/day tue 02/03/21)

25-02-21 09.30 Checked device logs. o/n update succesful. (guide populated M/day tue 02/03/21)

Attached Files

  logs-20210223-0914.zip (Size: 480.59 KB / Downloads: 2)
  logs-20210222-1512.zip (Size: 1.25 MB / Downloads: 2)

Martin,

What does "enable direct streams" do in 19.0? should it be enabled or not?

Hi,
I've patiently deleted ~2500 channels via the GUI / settings / channels.  All good, except now I'd like to get a few of those channels back, and can't find a way to do it.
Is there, for instance, an .xml file I can safely edit?  Or do I have to repeat the whole painful process again?   I'm using Version: 5.1.0.201216

How can I make the TV tab display on Kodi startup? The default is Home screen and I can select either TV Guide or TV Channels, but not the TV tab itself.