I have run with versions prior to 97.9 for many months with no trouble. Since upgrade I've not been able to playback on MVP
I use direct connect between PC and MVP as specified by Hauppauge (ip 192.123.1.1 on PC) and it worked for months prior to upgrade to 97.9.
GBPVR on console works OK
I presume MVP IP is 192.123.1.2 because it responds to ping from the PC and there are no other devices on the cable
Config program seems to work OK
Tray seems to load and behave OK
Recording service loads and works OK
Playback on MVP using Hauppauge swr works ok
Hauppauge swr when loaded manually connect MVP with no problems.
GBPVR is configured to autostart one server (as it was in the past)
Even starting a server manually does not help (it used to in the prior versions)
If left on "cannot connect to server" long enough, eventually a screen appears that shows available servers saying that no server can be found; additional scans for servers do not help (MVP native software connects, however and after it is stopped GBPVR still cannot find server). Scan is the only option available and does nothing.
Any suggestions would be welcome.
[ATTACHMENT NOT FOUND]
Ok at the current time my system setup is like this:
XP 2600 mobile Barton clocked to xp 3400 speeds
Asus radeon A 9800 (their 9800 xt)
Haupauge 150 mce(no radio)
winfast 2000/xp (software plug-in)
AverMedia MCE A180
512 MB of memory right now (one stick got RMA'ed)
Live tv on the HD cards seems a little stuttery on shows, however prerecorded digital shows play just fine, I've tried cyberlink as well as intervideo codecs and well I'm not having much luck here. I dun really know, but is the A9800 not hacking it or are the codecs just not optimized for my videocard (the cpu util goes way up on live tv) recorded shows seem fine :confused:
terramir
does anyone know if this requires you to have windows MCE or can these be installed on Windows XP Pro machines aswell ? i have been told by a supplier that they will only work on MCE ???
Hi everyone. I have been using GB-Pvr for a few months now and have been able to get it working with only a few minor problems that I was able to resolve by reading the forums here. I think I am down to my last issue with having it fully functional and working the way I want it.
My pvr system is a dedicated and purpose built system When I installed GB-Pvr it was on a fresh load of windows with all new hardware. The MB is an ECS P4M800pro-m (if that matters to anyone). The cpu is a P4 Intel 2.66 (not a celeron). 512mb ram. The video is a MSI Geforce FX 5200. It has a Hauppauge PVR-150 and for network access it has a D-Link wireless usb adapter (802.11b). I originally was running this system on a via epia 1ghz system but that proved to be way to slow to be practical for what I needed and it would lock up frequently so I upgraded to the 2.66ghz cpu and mb. The system performance is excellent now but it still locks up.
When the system locks up, the screen stays at the GB-Pvr menu but does not respond to keyboard or remote control inputs, or VNC connection requests.
The 2 consistent patterns that I have noticed.
1: In the event logs, the wireless network adapter will show that it has connected to the network and initiateded normal operation. It shows this about once a minute but does not show any disconnects.
2: After rebooting, the system always boots to the integrated video card and requires a power cycle to reset to the agp card (no bios option to disable integrated)
It will run great for several days and then will go lock up again. The wireless network connection messages come and go at random intervals.
At the time I put it all together, I used all the latest drivers from the manufacturers web sites.
Any suggestions at this point would be appreciated.
Oh, and one last thing. Congratulations Sub on creating a great piece of software.
I can't figure out how to get rid of the windows bars at the top and bottom of the screen, and it is really ruining my viewing experience. Is there an option somewhere that will allow me to do this?
Hello, im sure this is going sound dum, yet humoris to most
my cat walked on my key board and pessed something that has know turned my sound off. Short of reistalling, i was wondering if there was a pause button thats not listed on keyboard page?
I am hoping there is an SQL expert out there that can help me. I have a plug-in that runs SQL querries against the programme table to look up EPG information. I am using trying to use the regular expression syntax to allow remote control input to do text string look ups. Everything works finr when using Access but the querries don't work when using SQL Lite.
I am using something like this for the match text
WHERE (name LIKE '[8ÃÃÃÃtuvùúûü]%' OR name LIKE '% [8ÃÃÃÃtuvùúûü]%')
I would expect it to match name fields that, for example, have a word that start with t, u, or v. In Access it does; is SQL lite it does not.
I'm having trouble getting my PVR150 FM tuner working. When I scan for channels I do not get any. I know the card works as is because I installed Media Portal recently and the FM Tuner worked 'out the box'. Any ideas on what I can try to get it working in GBPvr?
P4 630
1G DDRII ram
ATI X700 PCI-E 256MB ram display
Sapphire Theatre Pro 550 TV card
with latest ATI display and TV card driver
using GB-PVR v0.97.9
I have audio sync problem in live TV mode (no problem in recorded tv program). Audio is 0.5 sec delayed.
I searched thru the forum and many advice to use "encoder pass through" to solve the problem
however, when I select "encoder pass through", it said "microsoft MPEG-2 demultiplexer" is not registered.
after I registered "microsoft MPEG-2 demuliplexer" and start GB-PVR, the audio delay problem gone, but it freeze the machine when switching to timeshift mode
the same did not happen when selecting "none" or "ffdshow...." in deinterlacing mode.
What should I do?
I have tried to use diff. video/audio decoder but just can't find the one working!
