Hello,

Today, I noticed that whenever the recording service switches channels on my WinTV-PVR150, if I am in the middle of playback of some show - the playback would stutter.

This happened to me twice in the last 2 hours while my wife and I were watching recorded episodes of House MD, and CSI. There were recordings scheduled that began during the time we were watching.

I can pin down the fact that it's the 150 because I could see the USB-UIRT blasting the channel numbers, and the stutter occurred immediately after the blasting was completed. The 150 is the only one of my 2 cards that records off the set-top box...

This never happened to me with the other card (a WinTV-PVR350).
I am using NVidia PureVideo decoders.

Thanks,
GGF

I was wondering if there was a way to make the internet radio work with the inset vis like the music library does. I like to listen to internet radio more than I do my own collection, but I like the neat trippy effects on my screen too

Maybe it does work and I just havn't figured out how to make it.

Thanks in advance.

-T

Is this possible? I have everything set up and have my tuner hooked up to my satellite box via coax. My guide shows all the channels correctly, but if I click +/- to change the channel, it still stays on whatever channel my box is set at. Is there a way to change the channel on the box without use of a remote?

Hi,

How does the GB-PVR store your planed recordings? is it the time tag or a recording ID? what happens if the show changes time will the planed recording also change time or will GB-PVR record the old start/stop time?

Somehow, my Magnavox TV remote is able to control my PVR-150. Some of the buttons, like the number ones, actually work. Others don't do what they're expected, making it pretty annoying. Is there a way to change what IR codes the PVR-150 remote uses to prevent this interference? Thanks

I have installed the latest version of GBPVR, and am having some difficulties getting the ATI TV Wonder VE card working.

I have modified the direct.ini according to the instructions for "Add A Card", by adding this section:

[ATI TV Wonder VE]
INIT_MODE=DEFAULT
INIT_MSP=0
CONEXANT=1
FILTER_CROSSBAR=ATI TV Wonder AV Crossbar
FILTER_CAPTURE=ATI TV Wonder Capture
FILTER_TV_TUNER=ATI TV Wonder TV Tuner
FILTER_TV_AUDIO=ATI TV Wonder TV Audio
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audio In
PIN_CAPTURE_CAPTURE_OUT=Video/Muxed Out
PIN_WRITER_INPUT_IN=Input

This was copied from the existing ATI eHome Wonder section, and then modified with the values that I found using GraphEdit. I then selected the card in Config, changed appropriate settings, and saved config. When I start Live TV, it appears to find the card, but does not start the live feed.

In GBPVR.exe-native.log, I see this:

09:42:35.640 VERBOSE Capture Device is using Conexant (derived) drivers
09:42:35.640 VERBOSE Loading filter names
09:42:35.640 VERBOSE Found names:
09:42:35.640 VERBOSE ATI TV Wonder AV Crossbar
09:42:35.640 VERBOSE ATI TV Wonder Capture
09:42:35.640 VERBOSE ATI TV Wonder TV Tuner
09:42:35.640 VERBOSE ATI TV Wonder TV Audio
09:42:35.703 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
09:42:35.703 ERROR Failed to route video crossbar
09:42:35.750 ERROR ConnectFilters(pCrossbar, pCapture) failed
09:42:35.750 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
09:42:35.750 VERBOSE Dest pin for connect not found
09:42:35.750 VERBOSE ConnectPins failed: hr = 80004005
09:42:35.750 ERROR Failed to connect pinNameCrossbarAudioDecoderOut to pinNameCaptureAnalogAudioIn09:42:35.750 VERBOSE getSetting(PreferredAudioDecoder)
09:42:35.828 VERBOSE put_Mode(AMTUNER_MODE_TV)
09:42:35.828 VERBOSE put_CountryCode(1)
09:42:35.828 VERBOSE put_TuningSpace(1)
09:42:35.828 VERBOSE put_InputType(0, 1)
09:42:35.828 VERBOSE put_ConnectInput(0)
09:42:35.828 VERBOSE put_Channel(5, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
09:42:35.984 VERBOSE get_VideoFrequency() returns 77250000
09:42:35.984 VERBOSE get_CountryCode() returns 1
09:42:35.984 VERBOSE About to query available formats
09:42:36.000 VERBOSE ConexantRecorder::SetConfigurationDefault()
09:42:36.000 VERBOSE getSetting(EnableTeleText)
09:42:36.000 VERBOSE getSetting(ListGraphFilters)
09:42:36.000 VERBOSE Graph contains the following filters:
09:42:36.000 VERBOSE - MPEG-2 Demultiplexer
09:42:36.000 VERBOSE - Capture
09:42:36.000 VERBOSE - ATI TV Wonder AV Crossbar
09:42:36.000 VERBOSE - TV Audio
09:42:36.000 VERBOSE - TV Tuner
09:42:36.000 VERBOSE getSetting(SaveGraphFiles)
09:42:36.015 VERBOSE ConexantRecorder::StartRecording() done
09:42:36.031 INFO DirectShowPlayerBase::playLiveStream(pGB, 'MPEG-2 Demultiplexer', 'Video Pin', 'MPEG-2 Demultiplexer', 'Audio Pin', hwnd)


Can someone give me some advice on what to do to correct this? I am attaching the config, log, and screen shot of filters from GraphEdit. Any help would be appreciated.

Thanks,
Don

I just got GBPVR installed and configured. Boy is this some great software for freeware.

Anyway, I have the Saphhire Theatrix (ATI Based) Theater 550 Pro.

I have the model with the
Dual Tuner

However, so far I have only been able to configure it as being one capture source.

I would like to configure both of the cable / coax inputs on the card as different sources. This way I could watch something while something else is recording.

Does anyone know how to do this?

Thanks for any help!

Hello,
now I'm trying to made GB-PVR use my Nvidia TV-out, and there are litte things I wonder about:

I've got 2 soundcards working in my computer. One of them GB-PVR should use. LiveTV, Movies, DVD and NetRadio worked well. But Radio and also Music don't use the soundcard I've chosen in playback and they play on the other card. Is there any screw I can handle this?

And also curious: After I had used time shift, an went out there, Live TV only shows a black screen. Nothing else happens, no sound, no picture, nothing.

Bevor I wouldn't reboot, it's still not working. Restarting of GB-PVR doesn't help.

cu
Jens

Hi folks first post!

Thanks for having me..

Down to business:

Right, i have this PC sitting doing nothing :

750MHz P3
512MB ram
ATI Radeon 9200 128MB graphics card with s-video out

And i got a tv tuner card coming through which i bought second hand.. hauppauge 56105.


Is this System ok to run GBPVR?

Ok secondly, what i want to do is take this box and connect it up to my main TV through S-Video without using a monitor just my TV screen. Is that ok?

What will i be able to do? Wil i be able to see my sky channels or just analogue? How would i go about doing all this.

As you can see. I'm the big cheese noobi when it comes to HTPC's.

Thanks alot folks!

Does gbpvr have a full-screen mode? The toolbars never seem to go away.

Every other PVR has a fullscreen mode (at least when watching a movie or tv). Why not gbpvr?

Am I missing something obvious?