My configuration uses a PVR-350 and a MediaMVP, so I have started GBPVR and GBPVR MediaMVP Server. When I try to play Netradio on the MediaMVP everything is fine. When I try to play the channels directly on the computer I get:
Station: Failed to connect to radio station.
The strange thing is, that the song title is displayed.

I tried to start only GBPVR without the MediaMVP Server after rebooting, but the problem remains the same.

Also is there a possibility, that this is somehow connected to other problems I have with jukebox (playing files and only on the soundcard not on the PVR-350)?

JAK

I've been talking with sub about redesigning the Web interface.  If you have a moment, please take look at these screenshots and provide your feedback.

This first iteration I think would be a basic skin job, keeping GBPVR's current color scheme and identity, with no new functionality.  I'm thinking it would be a good idea to drop the frameset and put the listings in a popup window when you click on them.

TV Guide Screen:
http://www.rightonbro.com/gbpvr/remote3_...stings.jpg

Listing Popup Window:
http://www.rightonbro.com/gbpvr/remote3_with_popup.jpg

Scheduled Recordings:
http://www.rightonbro.com/gbpvr/remote3_scheduled.jpg

I think my wishlist for this aspect of the program is:
* Ability to configure recordings like the main app (setting recording quality, padding time)
* Color-coding listings by type (i.e. green for movies, red for news, or whatever)
* Password protection up front
* Display listing description and other XMLTV data (such as movie rating, stars) if it's available, on the popup window or even on the grid itself
* An "Options" tab to let the user pick a different-colored skin, whether or not to have listings, etc.

Thoughts?  Feedback would be greatly appreciated.

thanks,
mdj

I have a wierd problem:

Firstly I can get GB-PVR to operate fine when using the RF-OUT (NTL STB) to RF-IN (PVR-350), but there is only mono sound because it's RF on 350 (only mono supported). So I now have NTL plugged in via S-Video In on my 350, but whenever I use anything other than the RF option as the source, when I go into LiveTV mode, nothing happens, just blank screen (with the Bleb info on BBC1 at the bottom) and if I click 'Home' on my keyboard, my computer just completely freezes!
Any suggestions? I've tried all other input options, but I just can't seem to get the S-Video In to work at all!
Also, my Hauppauge remote doesn't seem to have any effect on GB-PVR anymore, it used to, but now it doesn't! Batteries are fine and works in WinTV 2000!
Thanks!
josh

Does anoyne out there have a PVR350 and a channel changer so that they have GBPVR getting video through the Svideo line in but switching the channels on their cable or satelite box by use of an IR sender tied into the GBPVR channel guide? Is this possible?

Could someone tell me where the GB-PVR log file is loacated?

Hello,

i still have trouble with my EPG.
Meanwhile i searched in many forums. But i could not find any answer for my problem.

The TV-Guide of GB-PVR is nice. But it would be more nice to see the movie titles in my language.
A movie which is not made in Germany (the most of them are not ) is displayed with the title it has in the country where it was made. The german title is never displayed. So it is hard to find out the movies i want to record.

The 'tvguide.xml' file grabbed with 'XMLTV 0.5.43' contains both, the original title and the german title.

I guess that GB-PVR does not recognize them

Perhaps somebody here in germany can help me in this case?

S.Grobi

Sub:

I came across a problem when playing back a recording the fast forward and skip key will work fine on a 30 minute program. But with I play back a 60 minute recording around 43 minutes and try to fast forward or use the skip key ( to skip commercials) the program will freeze. I can shut off the MEDIAMVP unit and reload GB-PVR V0.19 and it will show the recording list with the program I was playing if I hit any key the screen will go blank I shut off the MVP and some times I can get the Main Menu page to come up but none of the keys will work and the TV Guide is highlighted and GB-PVR is locked. I can go to my computer and try to end GB-PVR but it will not close and I get a beep from my computer. I have to go the Task Manger (ctr-alt-del key) and stop GB-PVR and the error program not responding is shown then I tell it to close down.

This has happen several times playing back recordings it seem to play back fine if I do not use the skip of fast forward key after about 40 minutes in to the recording.

I can play back the recordings with the MEDIAMVP (Hauppauge software) and use the numbers keys to skip to 1 ie 10% 9 ie 90% in to the one hour recording or use the skip key with is a 30 second jump with no problem.

I am using the 250 Hauppauge card, a wired router connected to the MEDIAMVP, a Maxtor USB2 160G hardrive to record and play back the video. WinXP, P4 1.8G and 512 RDRAM (Rambus) memory in my computer.

Thanks.

Hello, I noticed that this software is the only TV application(that's not in Japanese ) that has an EPG and also supports the GO7007SB encoder. The Lifeview TV Walker uses this chipset, but it appears as if the PVR is looking for a specific WIS driver, as my crossbar is called the Lifeview TV Walker mini Crossbar, and this is the error in the log:
<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">03:08:54.157 ERROR Failed to find crossbar filter: WIS GO7007SB CrossBar[/QUOTE]I have found no other driver available for the WIS encoder, other than the ConvertX driver, and it will not work with the Walker. I did find the WIS GO7007SB SDK, but the zip file has a somewhat long password so I can only view it's contents. Also, in the Config utility, I noticed the lack of a tuner option when choosing the GO7007SB generic driver. Does this mean that the tuner will not work at all, or that it will work in a generic fashion? All of the other PVR apps I have tried worked the Walker's tuner just fine, and most even showed good video. None would record though, and only a few(those without an EPG) would render the audio, which you seem to already have worked out.... It seems that I am so very close to getting the software to work, even the EPG is working very well(unrelated, I know). Here is an image of a simple test graph that I built showing all of the Walker's filter names. I also have a list of their identifiers somewhere(or the graph file, itself) if that would help. So is there anything simple I can do to get this working? Seems like a simple label change is all it would take... I don't mind getting my hands dirty, if I need to(I've already scoured the Config.xml and the ini files...) in order to get this working. Any thoughts?

Thank in advance,
Hitek

-------------------------
Shameless plug:
Visit TV-Cards.com!

I am trying to setup PVRs at two different geographic locations. Zap2It actually has a provision for multiple program listings. However, GBPVR tries to pool both listings together. Is there any way to select a particular listing? Or do I need to setup another Zap2It account?

Hi, I am having trouble changing the recording quality with my Plextor PX-M402U. It seems to always be stuck on Medium. If I change the setting, exit the config program, and rerun it, the setting always returns to Medium. I am running the latest build.