I created a new skin named "Modern" with a bright, fresh and clean design. Note that this based on the default skin, so only the default screens are supported (no third party plugins). Enjoy!

https://github.com/cweseloh/nextpvr-skin...Modern.zip

Installation Instructions:
1. Unzip and copy the "Modern" folder to "C:\Users\Public\NPVR\Skin\"
2. Open the Settings window in NextPVR. Change the Active Skin to "Modern"

Hi,

I have a number of shows set as "Record all new episodes on this channel" but because of the way that the station has encoded them nPVR picks up all the repeats as well, which I don't want.

I have tried going through the recurring recordings list, picking the instances I don't want and setting those instances to "Cancel" which removes them from the list. However next day the unwanted duplicates are back.

I don't want to miss any episodes, so I need these shows on a recurring basis, but once I have decided that I don't want a particular repeat I should be able to get rid of it off the list permanently.

Am I doing something wrong, or is this a bug?

Thanks
Andrew

I've tried the device scan option for the new prime channel and it wasn't picked up on 12519 MHz.

These are the new settings according to http://freeviewforum.co.nz/page/prime-sat-changes#tech


12519 MHz, Service ID, Video PID, Audio PID, Teletext PID, PCR PID
Prime, 1530, 1013, 1113, 1913, 8183
FOUR PLUS 1, 1510, 1014, 1114, 1914, 8184
The Edge TV, 1511, 1015, 1115, ------, 8185

By manually editing a channel on 12519 MHz to SID 1530, I was able to get the EPG info for prime but not able to get a picture or sound. Must admit I don't understand the TSID and ONID settings - can't relate them to the above.

Any suggestions?

Thanks, Dave

My OTA EPG data shows up just fine on the program interface and I can manage recordings from the Web interface, but none if the EPG data will show up on the Web interface. The only this I have seen that looks funny is this:

9:57.591 [ERROR][33] Unexpected error in EPGEvent.LoadByOID(): System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at NUtility.EPGEvent.GetListingsForTimePeriod(DateTime startTime, DateTime endTime)
2016-05-31 23:19:57.649 [DEBUG][34] Got Web Request (192.168.1.3): /ScriptResource.axd d=yL3eyifVZbU5ickuxREUS2zpDheoIbEPSiY_LGjdjMPUkfjgjNiDYf6aeLOfIXEAX8Svx5zy5OUiwJC-g-9i_pknWEHYRbspkJPOiiCo4tupIFZ6e7O0_ID-zOcCowSsuiKIDIj9cNLPWXoXqPPd6w2&t=34a51159
2016-05-31 23:20:00.360 [DEBUG][34] Got Web Request (192.168.1.3): /public/GuideService/Listing sid=0fb592740604431da22d0671bbf69170&stime=1464747600&etime=1465093200&channelId=7276
2016-05-31 23:20:00.360 [INFO][34] checking incoming API call for sid query string
2016-05-31 23:20:00.360 [INFO][34] sid query string found: 0fb592740604431da22d0671bbf69170
2016-05-31 23:20:00.360 [INFO][34] checking for external access permission
2016-05-31 23:20:00.360 [INFO][34] !!! Overide for external access to REST API found via NPVR Allow Remote Access API setting.. Allowing external access for validated clients. !!!
2016-05-31 23:20:00.360 [INFO][34] !!! Cleint IP: 192.168.1.3
2016-05-31 23:20:00.360 [INFO][34] Using IP4 Address: 192.168.1.3
2016-05-31 23:20:00.360 [INFO][34] Valid Auto Login Network Detected

I'm a big fan of NextPVR and I created my first skin yesterday. I would be happy to share it with the group, but I haven't see anyone else posting them, and the skin page on the wiki hasn't changed in years. What's the best way to do this? Should I just zip my skin folder and post to this forum?

A few screenshots attached.

I'm trying to setup NextPVR but cannot get the channel to change.

I'm running Windows 10 (64) and using a Hauppauge 1800 capture card and have a Motorola set top box.

I have mapped some channels through Schedules Direct and I do have guide info.

I found a utility called uutx.exe that works from the command line to change the channel on the STB.

Under Settings - Devices I select the Hauppauge card and then Device Setup.

In the Executable box I enter the path to uutx.exe and in the Arguments box I enter the same arguments that I use successfully from a command prompt.

When I select a channel no attempt is made to change the channel in the STB.

So, from the command line it works but not from NPVR. What can I try?

Anyone with any STB that uses the Executable/Arguments I would appreciate seeing what you use for those entries.

Thanks

John

I have set the correct path in the config: C:\Program Files (x86)\VideoLAN\VLC

Yet when I click "Stream now" from the tv guide the only thing I get is this error:

[object Object]
error
Internal Server Error

Is this a known issue? Where can I look for more clues about what's actually going on here?

I have a Ceton InfiniTV 6 ETH, I know how to sort of set it up with WMC. It works but it slow, and laggy. I wanted to see if nPVR had the same issues but unfortunately I can't get it to do anything. I have it all set up with channels, each tuner, but live TV just gives a black screen, and sort of lags out. The temp file that is created, no data is in it. Recordings seem to do nothing either. I don't know if it's the fact that I am using windows 7, or what. As I stated I'm a noob at this trying to understand what I did wrong.
My codecs are some sort of windows codecs. And nPVR plays WMC recordings just fine with those windows codecs which I would think is expected. I will try to get more information if needed, I may also need help with understanding how to get more information.

Howdy,

I'm trying to pull schedule details for like 10 channels for the next 15 days, and I'm on the struggle bus. My update EPG bat file was working for a while, but it mysteriously stopped. I don't recall changing anything, but it's borked.

I thought I had my UpdateEPG.bat file set up correctly but I'm starting to suspect that maybe I don't.

The epg file I pull does appear to populate correctly with show data, but NextPVR isn't seeing it or showing it on the schedule

Presently, every channel pulls (no show details) for every time slot on every channel.

I have attached my log files. Any help is appreciated. Thanks in advance!

Sorry. Back again. I downloaded a couple of plugins. I have read around the place, but all I have found is the plugin manager. I get that, but how do I make my new plugins appear in that manager?

Thanks for any help

Nick