2006-04-29, 05:04 PM
I have installed the latest version of GBPVR, and am having some difficulties getting the ATI TV Wonder VE card working.
I have modified the direct.ini according to the instructions for "Add A Card", by adding this section:
[ATI TV Wonder VE]
INIT_MODE=DEFAULT
INIT_MSP=0
CONEXANT=1
FILTER_CROSSBAR=ATI TV Wonder AV Crossbar
FILTER_CAPTURE=ATI TV Wonder Capture
FILTER_TV_TUNER=ATI TV Wonder TV Tuner
FILTER_TV_AUDIO=ATI TV Wonder TV Audio
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audio In
PIN_CAPTURE_CAPTURE_OUT=Video/Muxed Out
PIN_WRITER_INPUT_IN=Input
This was copied from the existing ATI eHome Wonder section, and then modified with the values that I found using GraphEdit. I then selected the card in Config, changed appropriate settings, and saved config. When I start Live TV, it appears to find the card, but does not start the live feed.
In GBPVR.exe-native.log, I see this:
09:42:35.640 VERBOSE Capture Device is using Conexant (derived) drivers
09:42:35.640 VERBOSE Loading filter names
09:42:35.640 VERBOSE Found names:
09:42:35.640 VERBOSE ATI TV Wonder AV Crossbar
09:42:35.640 VERBOSE ATI TV Wonder Capture
09:42:35.640 VERBOSE ATI TV Wonder TV Tuner
09:42:35.640 VERBOSE ATI TV Wonder TV Audio
09:42:35.703 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
09:42:35.703 ERROR Failed to route video crossbar
09:42:35.750 ERROR ConnectFilters(pCrossbar, pCapture) failed
09:42:35.750 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
09:42:35.750 VERBOSE Dest pin for connect not found
09:42:35.750 VERBOSE ConnectPins failed: hr = 80004005
09:42:35.750 ERROR Failed to connect pinNameCrossbarAudioDecoderOut to pinNameCaptureAnalogAudioIn09:42:35.750 VERBOSE getSetting(PreferredAudioDecoder)
09:42:35.828 VERBOSE put_Mode(AMTUNER_MODE_TV)
09:42:35.828 VERBOSE put_CountryCode(1)
09:42:35.828 VERBOSE put_TuningSpace(1)
09:42:35.828 VERBOSE put_InputType(0, 1)
09:42:35.828 VERBOSE put_ConnectInput(0)
09:42:35.828 VERBOSE put_Channel(5, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
09:42:35.984 VERBOSE get_VideoFrequency() returns 77250000
09:42:35.984 VERBOSE get_CountryCode() returns 1
09:42:35.984 VERBOSE About to query available formats
09:42:36.000 VERBOSE ConexantRecorder::SetConfigurationDefault()
09:42:36.000 VERBOSE getSetting(EnableTeleText)
09:42:36.000 VERBOSE getSetting(ListGraphFilters)
09:42:36.000 VERBOSE Graph contains the following filters:
09:42:36.000 VERBOSE - MPEG-2 Demultiplexer
09:42:36.000 VERBOSE - Capture
09:42:36.000 VERBOSE - ATI TV Wonder AV Crossbar
09:42:36.000 VERBOSE - TV Audio
09:42:36.000 VERBOSE - TV Tuner
09:42:36.000 VERBOSE getSetting(SaveGraphFiles)
09:42:36.015 VERBOSE ConexantRecorder::StartRecording() done
09:42:36.031 INFO DirectShowPlayerBase::playLiveStream(pGB, 'MPEG-2 Demultiplexer', 'Video Pin', 'MPEG-2 Demultiplexer', 'Audio Pin', hwnd)
Can someone give me some advice on what to do to correct this? I am attaching the config, log, and screen shot of filters from GraphEdit. Any help would be appreciated.
Thanks,
Don
I have modified the direct.ini according to the instructions for "Add A Card", by adding this section:
[ATI TV Wonder VE]
INIT_MODE=DEFAULT
INIT_MSP=0
CONEXANT=1
FILTER_CROSSBAR=ATI TV Wonder AV Crossbar
FILTER_CAPTURE=ATI TV Wonder Capture
FILTER_TV_TUNER=ATI TV Wonder TV Tuner
FILTER_TV_AUDIO=ATI TV Wonder TV Audio
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audio In
PIN_CAPTURE_CAPTURE_OUT=Video/Muxed Out
PIN_WRITER_INPUT_IN=Input
This was copied from the existing ATI eHome Wonder section, and then modified with the values that I found using GraphEdit. I then selected the card in Config, changed appropriate settings, and saved config. When I start Live TV, it appears to find the card, but does not start the live feed.
In GBPVR.exe-native.log, I see this:
09:42:35.640 VERBOSE Capture Device is using Conexant (derived) drivers
09:42:35.640 VERBOSE Loading filter names
09:42:35.640 VERBOSE Found names:
09:42:35.640 VERBOSE ATI TV Wonder AV Crossbar
09:42:35.640 VERBOSE ATI TV Wonder Capture
09:42:35.640 VERBOSE ATI TV Wonder TV Tuner
09:42:35.640 VERBOSE ATI TV Wonder TV Audio
09:42:35.703 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
09:42:35.703 ERROR Failed to route video crossbar
09:42:35.750 ERROR ConnectFilters(pCrossbar, pCapture) failed
09:42:35.750 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
09:42:35.750 VERBOSE Dest pin for connect not found
09:42:35.750 VERBOSE ConnectPins failed: hr = 80004005
09:42:35.750 ERROR Failed to connect pinNameCrossbarAudioDecoderOut to pinNameCaptureAnalogAudioIn09:42:35.750 VERBOSE getSetting(PreferredAudioDecoder)
09:42:35.828 VERBOSE put_Mode(AMTUNER_MODE_TV)
09:42:35.828 VERBOSE put_CountryCode(1)
09:42:35.828 VERBOSE put_TuningSpace(1)
09:42:35.828 VERBOSE put_InputType(0, 1)
09:42:35.828 VERBOSE put_ConnectInput(0)
09:42:35.828 VERBOSE put_Channel(5, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
09:42:35.984 VERBOSE get_VideoFrequency() returns 77250000
09:42:35.984 VERBOSE get_CountryCode() returns 1
09:42:35.984 VERBOSE About to query available formats
09:42:36.000 VERBOSE ConexantRecorder::SetConfigurationDefault()
09:42:36.000 VERBOSE getSetting(EnableTeleText)
09:42:36.000 VERBOSE getSetting(ListGraphFilters)
09:42:36.000 VERBOSE Graph contains the following filters:
09:42:36.000 VERBOSE - MPEG-2 Demultiplexer
09:42:36.000 VERBOSE - Capture
09:42:36.000 VERBOSE - ATI TV Wonder AV Crossbar
09:42:36.000 VERBOSE - TV Audio
09:42:36.000 VERBOSE - TV Tuner
09:42:36.000 VERBOSE getSetting(SaveGraphFiles)
09:42:36.015 VERBOSE ConexantRecorder::StartRecording() done
09:42:36.031 INFO DirectShowPlayerBase::playLiveStream(pGB, 'MPEG-2 Demultiplexer', 'Video Pin', 'MPEG-2 Demultiplexer', 'Audio Pin', hwnd)
Can someone give me some advice on what to do to correct this? I am attaching the config, log, and screen shot of filters from GraphEdit. Any help would be appreciated.
Thanks,
Don