Failed to get capture filter output pin. This will ca

[jorm]

I have a PVR 150 and a PVR 250 FM in my box. I was using the ir blaster for the last two years and had to disable the 250 to get that to work. I just got rid of the ir blaster (software removed) and reenabled the 250 card.

The Win TV application can see both cards.

However Gbpvr fails to create the file or will create a file with 0 size. If I disable the 250 card in device manager everything works fine in gbpvr. In the log I see

2008-10-10 16:50:07.218 ERROR Failed to get capture filter output pin. This will cause encoder auto-detection to fail


Anyone have any idea what this means? Or more importantly how to fix it.
I havent upgraded in about a year but I think this is unrelated to that since it is part of the core of gbpvr.

2008-10-10 16:50:06.703 INFO Log started
2008-10-10 16:50:06.703 VERBOSE ConexantRecorder::StartRecording(1, 1, 7, 0)
2008-10-10 16:50:06.703 VERBOSE target filename: F:\movies\StarGate\StarGate_20081010_16001700.mpg
2008-10-10 16:50:06.718 VERBOSE Capture Device is based on BlackBird architecture
2008-10-10 16:50:06.718 VERBOSE Capture Device is using Conexant (derived) drivers
2008-10-10 16:50:06.718 VERBOSE Loading filter names
2008-10-10 16:50:06.718 VERBOSE Found names:
2008-10-10 16:50:06.718 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
2008-10-10 16:50:06.718 VERBOSE Hauppauge WinTV PVR PCI II Capture
2008-10-10 16:50:06.718 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
2008-10-10 16:50:06.718 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
2008-10-10 16:50:06.937 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
2008-10-10 16:50:07.218 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
2008-10-10 16:50:07.218 ERROR Failed to get capture filter output pin. This will cause encoder auto-detection to fail
2008-10-10 16:50:07.265 VERBOSE put_Mode(AMTUNER_MODE_TV)
2008-10-10 16:50:07.281 VERBOSE put_CountryCode(1)
2008-10-10 16:50:07.281 VERBOSE put_TuningSpace(1)
2008-10-10 16:50:07.281 VERBOSE put_InputType(0, 0)
2008-10-10 16:50:07.281 VERBOSE put_ConnectInput(0)
2008-10-10 16:50:07.281 VERBOSE put_Channel(7, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
2008-10-10 16:50:07.500 VERBOSE get_VideoFrequency() returns 175250000
2008-10-10 16:50:07.500 VERBOSE get_CountryCode() returns 1
2008-10-10 16:50:07.515 VERBOSE About to query available formats
2008-10-10 16:50:07.515 VERBOSE Set to MPEG2 width:720 height:480
2008-10-10 16:50:07.703 VERBOSE ConexantRecorder::SetConfigurationECP()
2008-10-10 16:50:07.703 ERROR Failed to get ECP general string
2008-10-10 16:50:07.703 VERBOSE getSetting(EnableTeleText)
2008-10-10 16:50:07.859 VERBOSE getSetting(ListGraphFilters)
2008-10-10 16:50:07.859 VERBOSE Graph contains the following filters:
2008-10-10 16:50:07.859 VERBOSE - GB-PVR Writer
2008-10-10 16:50:07.859 VERBOSE - Capture
2008-10-10 16:50:07.859 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
2008-10-10 16:50:07.859 VERBOSE - TV Audio
2008-10-10 16:50:07.859 VERBOSE - TV Tuner
2008-10-10 16:50:07.859 VERBOSE getSetting(SaveGraphFiles)
2008-10-10 16:50:09.171 VERBOSE ConexantRecorder::StartRecording() done
2008-10-10 16:50:10.828 VERBOSE ConexantRecorder::StartRecording(2, 1, 8, 0)
2008-10-10 16:50:10.828 VERBOSE target filename: F:\movies\The Wayans Bros\The Wayans Bros_20081010_16301700.mpg
2008-10-10 16:50:10.828 VERBOSE Loading filter names
2008-10-10 16:50:10.828 VERBOSE Found names:
2008-10-10 16:50:10.828 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
2008-10-10 16:50:10.828 VERBOSE Hauppauge WinTV PVR PCI II Capture
2008-10-10 16:50:10.828 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
2008-10-10 16:50:10.828 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
2008-10-10 16:50:10.859 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
2008-10-10 16:50:11.078 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
2008-10-10 16:50:11.093 VERBOSE put_Mode(AMTUNER_MODE_TV)
2008-10-10 16:50:11.093 VERBOSE put_CountryCode(1)
2008-10-10 16:50:11.093 VERBOSE put_TuningSpace(1)
2008-10-10 16:50:11.093 VERBOSE put_InputType(0, 0)
2008-10-10 16:50:11.093 VERBOSE put_ConnectInput(0)
2008-10-10 16:50:11.093 VERBOSE put_Channel(8, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
2008-10-10 16:50:11.375 VERBOSE get_VideoFrequency() returns 181437500
2008-10-10 16:50:11.375 VERBOSE get_CountryCode() returns 1
2008-10-10 16:50:11.390 VERBOSE SetFilterProperty - IKsPropertySet->QuerySupported property failed

2008-10-10 16:50:11.390 VERBOSE SetFilterProperty - IKsPropertySet->QuerySupported property failed

2008-10-10 16:50:11.390 VERBOSE GetFilterProperty - IKsPropertySet->QuerySupported property failed

2008-10-10 16:50:11.390 VERBOSE GetFilterProperty - IKsPropertySet->QuerySupported property failed

2008-10-10 16:50:11.390 VERBOSE GetFilterProperty - IKsPropertySet->QuerySupported property failed

2008-10-10 16:50:11.390 VERBOSE GetFilterProperty - IKsPropertySet->QuerySupported property failed

2008-10-10 16:50:11.390 VERBOSE GetFilterProperty - IKsPropertySet->QuerySupported property failed

2008-10-10 16:50:11.390 VERBOSE GetFilterProperty - IKsPropertySet->QuerySupported property failed

2008-10-10 16:50:11.390 VERBOSE GetFilterProperty - IKsPropertySet->QuerySupported property failed

2008-10-10 16:50:11.390 VERBOSE GetFilterProperty - IKsPropertySet->QuerySupported property failed

2008-10-10 16:50:11.390 VERBOSE GetFilterProperty - IKsPropertySet->QuerySupported property failed

[jorm]

adding filter check logs.

[sub]

I think your device numbers are swapped. If you accidentally setup a PVR250 capture source pointing at PVR150 hardware, then you get all these "IKsPropertySet->QuerySupported property failed" messages.

[jorm]

I cant believe that was it. Thank you it is working fine.