2nd Capture Device problem
|
2005-04-18, 03:47 AM
I've had a Hauppauge for a while now, it works great. Today I added a 2nd 150 card. The second card won't record or allow pause and rewind. It doesn't write to the hard drive at all. Also, when recording on the first 150, which still works fine, I can watch live TV on the computer monitor, but it won't go to my Media MVP. Any ideas?
2005-04-18, 04:09 AM
Did you set the card type correctly. Also, one should be set to device #1, the other to device #2.
2005-04-18, 02:48 PM
Both are setup as PVR-150 and I have them set up as capture device 1 and 2 respectively. I have tried switching them around both in config and switching PCI slots, with the same result. I have also tried them individually and they both work. Are there other settings I might be missing? Any ideas would be great. Thanks.
Brad
2005-04-18, 03:17 PM
If you have them around the wrong way you will get an error when you try and record something. If you get no error like this then gbpvr likes the order you have them in. Make sure that you have it set to pvr150 and not 250 or something. Are the cards shareing IRQ's? This can cause all kinds of problems
Asus A7V880 Motherboard
AMD Sempron 2400+ 1.67GHz (Socket A) CPU Maxtor DiamondMax Plus 10 200GB SATA 8MB Cache Maxtor DiamondMax Plus 10 160GB SATA 8MB Cache Corsair 512MB DDR Value Select PC3200 Hauppauge PVR150 2 X Hauppauge Nova-T (200009) FX5200 composite out
2005-04-18, 03:32 PM
I'm getting no errors at all, but I will check the IRQs when I get home. Thanks for the advice.
2005-04-18, 11:50 PM
If you can setup a test to try and to use both cards, then send the logs over to me at support@devnz.com and I'll take a look. Include a link to this thread so I know what you're on about.
|
|
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| ATI Wonder USB device not detected | fl!pper | 1 | 3,419 |
2018-02-06, 01:46 AM Last Post: sub |
|
| Composite channel configuration problem. | seymoria | 6 | 4,253 |
2012-01-15, 10:15 PM Last Post: seymoria |
|
| Recording problem with Hauppauge Nova-S USB2 ... | softfoot | 4 | 3,109 |
2011-06-27, 02:06 AM Last Post: sub |
|
| Problem with GB-PVR - Cannot Watch Channels and Administrator Problem | Greg Smith | 10 | 4,099 |
2011-05-22, 05:09 PM Last Post: sub |
|
| Problem with switch to DST | next | 4 | 2,073 |
2011-03-29, 08:42 PM Last Post: darag2358 |
|
| Huge database (+27GB) - is it a problem? | pme | 7 | 2,673 |
2011-01-24, 12:37 AM Last Post: gEd |
|
| MCE 2005 IR Blaster problem | persim | 6 | 3,138 |
2010-12-29, 01:28 AM Last Post: persim |
|
| Another pause problem | fleapower | 10 | 3,498 |
2010-12-15, 09:33 PM Last Post: fleapower |
|
| remote problem in GBPVR | Zacken | 5 | 2,326 |
2010-12-08, 09:00 PM Last Post: Zacken |
|
| Transcode Problem | axeman91 | 7 | 3,002 |
2010-11-22, 09:02 AM Last Post: goelectric |
|
