Combining NTSC and ATSC

[Boiler98]

Hello all.

I have an AVerTV M780, with two tuners currently set up -- one for NTSC and one for ATSC (going to look into QAM soon). I've mapped the ATSC channels to the appropriate analog channels, but can't figure out how I view them.

How do I configure GBPVR to use 4.1 (ATSC) instead of 4 (NTSC) when I press 4, or how do I just tune to 4.1 at all?

Thanks much!

[sub]

You can assign any channel numbers you want to any channel on the main channels tab in the config app.

The rest of the world doesnt use this silly "4.1" numbering convention adopted with ATSC, so GB-PVR has no native understanding of the dot. You'll just have to allocate it some number that makes sense to you.

[Boiler98]

Thanks sub, but I'm still confused as to how I can get to my digital channels.

On my digital tuner setup I mapped 4.1 to channel 4, but when I press 4 in PVRX2 I still get the analog signal. Looking at the 'Channels' tab, I don't see anything that looks to give me the ability to replace that number.

Should I be mapping 4.1 to channel 104 (for example) instead?

EDIT: Yup, that did it. Might have done a few others things in there too, but I've got both NTSC and ATSC up. Woohoo!