When I try any type or record, scheduled, manual, etc. I get entries in "pending recordings" but record never starts. I sure it's something i've overlooked. I've applied latest patches but no help. Live TV digital and analog works great. Logs attached.
Migrated from v2.5.9 to 3.1.1 using the general MSI package, and then applied the NPVR 3.1.1 R1 rollup.
Most functions seem to work well, and I find the new OSD TV Guide super useful (thanks!).
However, a couple of basic play functions that I have come to rely on either don't work at all, or are very fragile. I'll focus on skip in particular since I see what appear to be identical errors in the npvr.exe front end.
I can initiate play on normal recordings, but any time I try to mess with skip functions, either short (via >> IR remote key) or long (via ->| IR remote key), NPVR pops up an unhandled exception with a "divide by zero" error. When this happens, the only recovery is to kill the npvr.exe process completely, I've found no other alternative.
This is really bad during chase play, where I simultaneously play a file that is currently recording. Popups are always unhandled exceptions with divide by zero errors.
Last night I captured npvr.exe log data from one such event where I played a normal, completed recording. I then attempted to skip 50 minutes ahead with my usual technique on the IR remote: 5, 0, ->| . This immediately brought forth the unhandled exception/div0 popup. I extracted the corresponding log entries and attached them to this posting.
I'm a little surprised I wasn't able to find similar reports in the forae... hope I'm not out here on my own with this one.
Let me know if I can extract any additional information. Thanks!
My HTPC is an Acer Aspire X1200-U1520A (specs). The computer is connected to a Samsung (don't have the model number handy at the moment) 37" HDTV (720P native). Two tuners are installed. The first is an ATI 650 Combo PCIe and the other is an AverMedia M780. Operating system is Windows 7 Home Premium. My cable provider is Comcast (Baltimore - Essex, Maryland).
I've been using WMC for some time. WMC has always just worked on my system. No performance issues, artifacts, or anomalies in video or audio.
I'd like to get the same results with NextPVR, but so far I haven't been able to get there. I've installed SAF6 (unlocked). Tried all the Renderer options (but primarily EVR). I've tried all the the MPEG2 Video Decoders (but primarily Microsoft DTV-DVD Video Decoder and PDVD13).
So the problems I'm seeing in NextPVR that I don't ever see with WMC are some artifacts or freezing/stuttering seen in live TV (HD/SD). It's especially noticeable when watching the news and they display their graphics in the background (to the side of the reporters head) our full screen (like say a traffic or weather report graphic). You can see the lines in the graphic (for example a road) flicker momentarily here and there. It happens every few seconds to many seconds apart. I don't know if it's an interlacing problem, some kind of sync problem, frame rate or what. You can also see it happen in regular video - say watching a persons head/face as they speak or watching a train move on the screen. The motion just seems to stutter ever so briefly for a second here and there. Rapidly panning video also seems to be an issue.
So what special sauce is WMC using that NextPVR isn't? There's got to be something different about how the two pieces of software go about their business because they produce different results. I've noted DirectShow vs. Media Foundation, but I'm not a software engineer/programmer so the significance in this application probably escapes me.
I'll also note that I have another desktop the I'm serving live TV to with NPVR Server to NPVR client (hardwired CAT5/Ethernet from Netgear router). I installed a NVidia GeForce 8500 GT in that computer a few years back (it's not using it's integrated). I don't recall off my head the rest of the computer specs (but note that it's a few years older then the Acer I mentioned above). It's connected to a Viewsonic 17" monitor. Anyway, served live TV plays beautifully on this desktop. I'm assuming that it's sent as MPEG2 to the client and is decoded on the client computer via the GeForce 8500 GT (DXVA hardware acceleration). Essentially, my assumption is that NextPVR is doing basically the same thing on both machines except the source is different for the MPEG2 (tuner card vs. Ethernet stream). So why is NPVR working so well on the other desktop vs. my HTPC connected to my HDTV?
I've recently updated from windows 7 to windows 8.1 where i had NextPvr as a backend for xbmc.
Since I've updated I cant get NextPvr to recognize my HP analog tuner..
I have followed the instructions as best i can for adding a analog tuner, I have run the batch SoftPVR as administrator, all files extract successfully.
I have also created a AnalogDevices.xml and placed it in the root of the NPVR folder.
Under Devices i have currently listed.
ATSC HP ATSC tuner
QAM HP ATSC tuner
I am missing the Analog Devise and not sure what I'm missing or if its a windows 8.1 thing..
Thanks for any help in advance..
My AnalogDevices.xml
<Device filter="HP Analog Capture">
<Name>HP Analog Capture</Name>
<Type>SOFT_ENCODE</Type>
</Device>
FilterCheck.log
21:22:44.478 INFO Log started
21:22:44.478 INFO Filter Check v1.0
21:22:44.478 INFO
21:22:44.478 INFO
21:22:44.478 INFO Checking AM_KSCATEGORY_CAPTURE filters
21:22:44.493 INFO found: MicIn
21:22:44.503 INFO - (input) ADC
21:22:44.503 INFO - (output) Recording Control
21:22:44.503 INFO
21:22:44.503 INFO found: MuxedIn1
21:22:44.503 INFO - (input) ADC
21:22:44.503 INFO - (output) Recording Control
21:22:44.503 INFO
21:22:44.503 INFO found: HP Webcam
21:22:44.513 INFO - (output) Capture
21:22:44.513 INFO - (input) Video Camera Terminal
21:22:44.513 INFO - (output) Still
21:22:44.513 INFO
21:22:44.513 INFO found: HP Analog Capture
21:22:47.302 INFO - (output) Capture
21:22:47.302 INFO - (output) VBI
21:22:47.302 INFO - (output) Audio
21:22:47.302 INFO - (input) Analog Video In
21:22:47.302 INFO - (input) Analog Audioinput
21:22:47.302 INFO
21:22:47.302 INFO
21:22:47.302 INFO
21:22:47.302 INFO Checking AM_KSCATEGORY_ENCODER filters
21:22:47.302 INFO
21:22:47.302 INFO
21:22:47.302 INFO Checking AM_KSCATEGORY_MULTIPLEXER filters
21:22:47.302 INFO
21:22:47.302 INFO
21:22:47.302 INFO Checking AM_KSCATEGORY_CROSSBAR filters
21:22:47.307 INFO found: HP Analog Xbar
21:22:47.452 INFO - (input) 0: Video Tuner In
21:22:47.452 INFO - (input) 1: Audio Tuner In
21:22:47.452 INFO - (output) 0: Video Decoder Out
21:22:47.452 INFO - (output) 1: Audio Decoder Out
21:22:47.452 INFO
21:22:47.452 INFO
21:22:47.452 INFO
21:22:47.452 INFO Checking AM_KSCATEGORY_TVTUNER filters
21:22:47.452 INFO found: HP Analog TV Tuner
21:22:47.627 INFO - (output) Analog Video
21:22:47.627 INFO - (output) Analog Audio
21:22:47.627 INFO
21:22:47.627 INFO
21:22:47.627 INFO
21:22:47.627 INFO Checking AM_KSCATEGORY_TVAUDIO filters
21:22:47.627 INFO found: HP Analog TV Audio
21:22:47.627 INFO - (input) TVAudio In
21:22:47.627 INFO - (output) TVAudio Out
21:22:47.627 INFO
21:22:47.627 INFO
21:22:47.627 INFO
21:22:47.627 INFO Checking AM_KSCATEGORY_VBICODEC filters
21:22:47.632 INFO
21:22:47.632 INFO
21:22:47.632 INFO Checking KSCATEGORY_BDA_NETWORK_TUNER filters
21:22:47.632 INFO found: HP ATSC Tuner
21:22:47.632 INFO - (input) Input0
21:22:47.632 INFO - (output) MPEG2 Transport
21:22:47.632 INFO
21:22:47.632 INFO
21:22:47.632 INFO
21:22:47.632 INFO Checking KSCATEGORY_BDA_RECEIVER_COMPONENT filters
21:22:47.632 INFO found: HP Digital Capture
21:22:47.637 INFO - (input) MPEG2 Transport
21:22:47.637 INFO - (output) MPEG2 Transport
21:22:47.637 INFO
I am using XBMC for android on a Galaxy S3 phone with a NextPVR server.
When on my local network, the client works perfectly.
When coming through my firewall from the Internet, the client attaches to the server fine (channel guide updates, next scheduled recording shows correctly). But, when I request to watch a live channel, the XBMC client shows "working" and hangs forever.
A sniff of the traffic between client and server shows this:
- Initial TCP handshake is fine
- Client makes this request: GET /live?channel=2&client=XBMC-43f82ab1acfb4b62b7a120488cca4dbc HTTP/1.0
- Server ACKs
- Client then sends: Connection: close
- Server responds: HTTP/1.1 403 ForbiddenServer: NextPVR Connection: Close
- About 3.5 minutes later the server RSTs the TCP connection
- About 50 seconds later, the client opens new TCP connection and sends: GET /service? method=recording.list&filter=pending&sid=43f82ab1acfb4b62b7a120488cca4dbc HTTP/1.1
Range: bytes=0-
User-Agent: XBMC/12.2 Git:20130502-32b1a5e (Linux; Android; 3.0.31-1152558 armv7l; http://www.xbmc.org)
Host: x.x.x.x:8866
Accept: */*
Connection: keep-alive
- Server reply: HTTP/1.1 200 OK
Server: WinTVExtender
Connection: Close
Content-Length: 110
Content-Type: application/xml
- Client: ACK
- Server: <?xml version="1.0" encoding="utf-8" ?>
<rsp stat="fail">
<err code="8" msg="Invalid Session" />
</rsp>
- Client: ACK
- Client: FIN
- Server: ACK
So, not sure what it is that either the client or the server is having an issue with. The firewall is a straight-through, one-to-one NAT.
Is there a setting either on the client or on the server that needs to be set saying "allow streaming to foreign IP addresses"?
Any help to debug this would be greatly appreciated.
So... Following the instructions I get to the part below. I don't see the the "Find More" button anywhere. What am I missing?
Quote:TheTVDB integration
The plugin is able to automatically enhance the tv shows with information from TheTVDB.com, once a tv show's title has been linked to a TheTVDB series. In order to do so, the following simple steps are needed: In the listings, open the details for a programme of a series you wish to link. Select "Find More", and choose "TheTVDB" from the dropdown button.
We have five new HD channels in UK here from Tuesday plus Al Jazeera HD from a couple of weeks ago.
My NPVR setup has audio glitches on Al Jazeera HD and BBC News HD on Live TV [the other new channels have no audio until Tuesday]
Playback of recordings and even playback of timeshift are both OK.
Older HD channels are OK in Live TV.
There are two audio formats in the streams HE-AAC and MPEG [on all HD channels though]
However if I disable the MPEG decoder in Decoder settings of NPVR the glitches go away.
MPEG decoder choice other than disabled does not help.
I am using LAV Audio for HE-AAC.
Windows Firewall disabled
NOD32 disabled
nDroidServiceSetup-2.0.2.0.exe installed
username admin
password admin
port 8790
IP server 192.168.178.2
nDroid on Samsung S3 and WiFi.
The application remains in research.
Not is it possible to enter new configuration parameters, except by uninstalling and reinstalling the app.
