I am trying to configure my Hauppauge USB-Live2 device. As it has not got a h/w encoder I have installed WinTV7, with which it works well, and put this entry in the AnalogDevices.xml, admittedly it was guess work!
Hi, now that 2.0.3 is here I took the plunge a few days ago and updated from GBPVR. My system: XP SP3 on a quad core, dual-tuner HVR2200, NZ freeview using DVB-T with line of sight of kaukau.
Firstly let me say I am impressed with the setup - other than checking prerequisites and noting sentiments that npvr works well under Win7, I found setup a breeze. Sub, you've done a good job on tuner setup, much easier than gbpvr. And very timely tuning a new setup - was not aware that stratos had started broadcasting on DVB-T :-)
I have encountered a few issues which I'll list here and follow up with some usability observations...
1) When I start npvr on my 4:3 PC screen (which is a lot of the time) npvr always starts up in widescreen mode. It does not remember the last setting (although it does seem to remember the approximate size), even with 4:3 preselected in the settings. Reproducable.
2) The aspect ratio problems seem to cause drawing issues. Cycling thru them via F7 does not seem to fix; I think it can only be remedied if the window is resized when you first get to the TV guide (before viewing a channel)? See AR1.jpg; in AR2.jpg I thought I'd see a replay of '7 days' (but of course it was tsunami coverage), and when I tried to fix the aspect ratio some of the video resized but a lot of garbage would not go away.
3) I think I'd heard multiplexing was enabled in npvr so I started 'quick record' for 4 programs (cool - on my dual-tuner). When I tried starting a 5th I got a 'no tuner available' message, and after a second or 2 I tried escaping from the message... but I guess there is no focus handler in the message box and the escape exited the TV Guide instead. Reproducable.
3) After the test in (2) I started to cancel the recordings, but after cancelling the second, npvr hung. Wonder if it was caused by npvr freeing up one muxed channel per tuner or both on one tuner... not sure which order I tried to free them in... I could test again if this isn't a known issue.
4) After killing NextPVR and NRecord, restarted the recording service via NTray, then started nPVR again. after killing other 2 recordings (presumably resumed after service restart) NextPVR was using 16-25% CPU and I was only sitting on the TV Guide screen.
5) It seems the status of the tray service does not always show activity - more than once I've started a quick record and the tray status shows nothing. Also on sunday I started quick record of one program (program had already started) and then quickly started another, but after selecting the second when I returned to the quide, it no longer showed the first in red. Under recordings it shows both as failed, 'device failed to start' but I have no idea why that would be so in this case.
Observations:
6) IMHO the TV guide is harder to read... would be easier with a smaller font and making more use of the lower part of the screen (or instead of displaying 8 channels, 7 like gbpvr) - see guide-old.jpg, guide-new.jpg. Maybe my default font is defaulting to bigger than expected (although I have no special XP theme setup) - I've seen quite a few bits of truncated text - couple of examples in truncations.jpg.
7) In the TV guide the current time marker shaded all currently playing programs in grey in gbpvr - it was easier to see where programs start, finish and overlap. Also very handy if scrolling forward several hours, serves as a great visual marker in the guide when scrolling back.
So there is my little list. I really like the feel of npvr but on my rig it does not (yet) seem as robust as gbpvr. Anyone else encountered any/some of these issues?
I finally did the big switch. Before the Big Dance this week I didn't want the crazy issues with gbpvr recordings so I changed over. One quick q, is there a way to search the guide?
Everything was going great until I imported my recordings and then I go the stopped working error. The thing is, it didn't stop working at all. I was able to set up a recording, record, playback, etc. No issues except for the error.
It looks like this:
Quote:Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: nextpvr.exe
Problem Signature 02: 1.0.0.0
Problem Signature 03: 4d741fd3
Problem Signature 04: mscorlib
Problem Signature 05: 2.0.0.0
Problem Signature 06: 4bebd50b
Problem Signature 07: 2b6
Problem Signature 08: 34
Problem Signature 09: System.ArgumentOutOfRange
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
It seems there may be a new problem with the way the panel works under 2.0.3 as there have been a number of reports of the NMT rebooting like in these threads http://forums.nextpvr.com/showthread.php...gs-failing & I also had the same thing happen today with the exact same message in the log.
I am also having major problem with the screen not updating when using TV Recording, it is almost unusable now the way it is, it will either have four or five highlighted boxes all on screen at once or not highlight the selected box at all until I go to the buttons then the right box highlights.
I recorded and then watched The Amazing Race: Unfinished Business tonight. Note, the recording was completely finished before I began playing it. However, I think that comskip was still processing it when I started it on the PCH the first time.
When I first watched it, I was using the PCH and noticed that it showed the length of the recording as 01:13:45. It should have been a 1-hour show plus either 1 or 3 minutes of padding (depending upon whether the post-padding was honored).
When the playback got to the end of the program, mvpmcx2 hung displaying a frame of video. I'm guessing that the hang was caused by npvr reporting the length of the program as 01:13:45, but the file is actually only about 01:03:00, and when mvpmcx2 tried to go past the end of the file, it had problems.
I then tried playing it on the pc. On there, the length kept changing fluxuating between 01:15:00 and 01:07:00 or so. (I only played about 5 minutes, so I don't know if it would have stopped changing at some point or not.)
I've attached logs. The timing.info is from this recording. The putty.log is the info from the PCH for the time when it hung. The npvr.log is from playing it on the pc. Unfortunately, when the PCH hung, it was using an mvp server which wasn't logging, so I don't have the original log from it. But I did go back and begin playing it on the PCH and got an mvp.log which shows beginning playing the file.
I would like the audio for video playback to continue to go out via HDMI but have mp3 and flac files routed to a different audio output device (my m-audio sound card to my amp).
Any chance of adding such a feature or ideas on how I may accomplish this?
In the last couple of weeks I have been experiencing quite a few failed recordings. I am not sure why or how it hangs, the recordings screen does not state failed recordungs until I restart the recording service. Then recordigns are displayed as failed with the reason Recording Service not runnind. But it was running (or prehaps hung but it looks like it is running when looking at the services screen).
My setup is a bit old with P4 4 GHz with 3.5 GB RAM, the on-board graphics card (do not watch anything on the computer, it is tucked away in a cupborad. All viewing is done through NMT), Win XP sp3 with all current patches. Two FloppyDTV DVB-C with CI,
I attach the logs from just now, the strange thing is that viewing other recordings through NMT worked fine.
I am at the latest nPVR (2.0.3) and am running one of the latest mvpmcx2 (i think I might have missed out on the latest updates from Martin). I know I have 2 MVP servers ruinning (since we have two NMT, ane A-100 and one A-110). Can perhaps lower to one if that is the culprit and we need to investigate it.
Unfortunatly I dom't think the logs contain any useful information. Not as far as I can see anyway.
All recorings from yesterday onwards have all failed.
I just ran a fresh install with npvr 2.0.3 on winxp. I setup the hdpvr but forgot to set the channel changer. I went back in to edit it and point it to the haupblast.exe. I hit OK and exited. The change, however, doesn't seem to be saved. I've tried it a couple of times with no luck.
The workaround was to go back and install 1.5.36, setup the hdpvr and then upgrade to version 2.03.
I know the best option is to fork out $95 for VideoRedo H264 Edition but I am cheap by nature.
Is there any freeware alternative for removing adverts and padding on the few programs that are "keepers"?
Its not size that's the problem just convenience during playback - that dreaded WAF again
Comskip not really an option in the UK with our seamless ad breaks :mad:
I notice that when resuming playback of a recording a second or so of the audio at start of the file is heard.
I currently have to use the Divx AAC decoder fo HD recording playback. This decoder does not tolerate audio format changes within a recording.
If the issue I've mentioned could be fixed I could stop and resume a file from the point when the format changes and play the file successfully.
), Win XP sp3 with all current patches. Two FloppyDTV DVB-C with CI,
