I have one server PC one Client PC and one Popcorn Hour. After upgrading I am not able to record properly. The file gets created but the file size is 0 bytes. I am not sure what the problem is. Also I noticed that I can watch live TV from my server but not from the client or the PCH. I can watch show previously recorded on all three. I am not sure what is going on. I also noticed that on the server some of the channels do not have sound. I tried to remap the channels multiple times but there was no change. From the mapping page in the configuration the sound is fine on all channels. I am not sure what is up.

Help!

Hi I want to go Windows 7 64, what card would work for me.

My Specs are I7 6GB
Analog cable but would like digital option.

I run the Huappage PVR250 on XP Pro but Windows 7 does not play with this card and its drivers?

Thanks for all help

Brad

Lately I'v had problems tuning into History Channel HD, gbpvr says that no signal is found. Sub, can you check if the correct tuning request is submitted?

Hi

Will there be support for this ?

Currently the digital driver for satelite works under Lifeview FlyDVB-S. Have not tested DVB-S support on this card.

Can provide with any info needed.

Hi all,

this post is more for the dutch people. I recently discoverd that floppydtv is stopping its production. In NL (ziggo area) this is a disaster. Why? Well floppydtv is about the only PC card you can put in your HTPC.

I would like to know how you out there record digital tv from Ziggo with a HTPC...

Tnx for the replies

I have a Haupage 150 with blaster. I chose exe and pointed it to haupblast. In live TV and for scheduled recording it blinks but does not change the channel on My Scientific Explorer cable box. Blastconfig changes it no problem, Win TV changes it no problem, sending a manual channel via Haupblaste.exe via the command prompt works fine as well. Not sure what is up. Any thoughts.

Thanks.

Im almost there. Everything is working except for when I want to watch a channel that I select in the guide. If i highlight the show and press OK, the OSD guide updates to that channel but the STB stays at the same channel. Obviously this is something that I might need to set up in HIP however, Im not exactly sure which keypress and code to use.

Does anyone know?

Is it possible to make "WinTV PVR USB" work with GBPVR?

The card works fine with the wintv software but its pretty limited.

It is the orig one not the newer pvr2
here is the data sheet http://www.hauppauge.com/html/wintvpvrusb_datasheet.htm


this is my FilterCheck.log if it helps



a20:53:48.078 INFO Log started
20:53:48.078 INFO Filter Check v1.0
20:53:48.078 INFO
20:53:48.078 INFO
20:53:48.078 INFO Checking AM_KSCATEGORY_CAPTURE filters
20:53:48.093 INFO found: SigmaTel Audio
20:53:48.390 INFO - (input) PC Speaker
20:53:48.390 INFO - (output) DAC
20:53:48.390 INFO - (input) SPDIF Interface
20:53:48.390 INFO - (input) ADC
20:53:48.390 INFO - (output) Recording Control
20:53:48.390 INFO
20:53:48.390 INFO
20:53:48.390 INFO
20:53:48.390 INFO Checking AM_KSCATEGORY_ENCODER filters
20:53:48.390 INFO
20:53:48.390 INFO
20:53:48.390 INFO Checking AM_KSCATEGORY_CROSSBAR filters
20:53:48.390 INFO
20:53:48.390 INFO
20:53:48.390 INFO Checking AM_KSCATEGORY_TVTUNER filters
20:53:48.390 INFO
20:53:48.390 INFO
20:53:48.390 INFO Checking AM_KSCATEGORY_TVAUDIO filters
20:53:48.390 INFO
20:53:48.390 INFO
20:53:48.390 INFO Checking AM_KSCATEGORY_VBICODEC filters
20:53:48.500 INFO found: NABTS/FEC VBI Codec
20:53:48.500 INFO - (input) VBI
20:53:48.500 INFO - (output) NABTS
20:53:48.500 INFO - (input) HWNABTS
20:53:48.500 INFO
20:53:48.500 INFO found: CC Decoder
20:53:48.500 INFO - (input) VBI
20:53:48.500 INFO - (output) CC
20:53:48.500 INFO - (input) HWCC
20:53:48.500 INFO
20:53:48.500 INFO found: WST Codec
20:53:48.500 INFO - (input) VBI
20:53:48.500 INFO - (output) Teletext
20:53:48.500 INFO
20:53:48.500 INFO
20:53:48.500 INFO
20:53:48.500 INFO Checking KSCATEGORY_BDA_NETWORK_TUNER filters
20:53:48.500 INFO
20:53:48.500 INFO
20:53:48.500 INFO Checking KSCATEGORY_BDA_RECEIVER_COMPONENT filters
20:53:48.500 INFO found: BDA Slip De-Framer
20:53:48.515 INFO - (input) NABTS
20:53:48.515 INFO - (output) IPv4
20:53:48.515 INFO

I can watch live TV in PVRX2 from either tuner. When I record I get a 6 KB file that is typical of a failed recording and obviously it won't play. I just upgraded to 1.4.7 and the latest HDHR firmware. I tried going back to older HDHR firmware and re-scanning channels in config.exe, no luck. Logs and config.xml attached.

Bought an avermedia duet since it is such an inexpensive dual ATSC PCI-e tuner. I loaded the drivers on their CD and updated the BDA.ini with this:

[AverMedia Duet A188]
TUNING_TYPE=ATSC
FILTER_TUNER=AVerMedia 716x BDA ATSC Tuner
FILTER_CAPTURE=AVerMedia 716x BDA Digital Capture ATSC
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport

It was from this thread: http://forums.nextpvr.com/showthread.php...light=duet

The scan crashed because the device could not be found (or something like that).

I ran filtercheck (see the log attached) and it had different filters than the thread so I changed BDA to this:

[AverMedia Duet A188]
TUNING_TYPE=ATSC
FILTER_TUNER=AVerMedia 716x BDA ATSC DC Tuner
FILTER_CAPTURE=AVerMedia 716x BDA Digital Capture
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport

Lo and behold I could scan but there were no channels found :eek:

I loaded everything on the avermedia CD thinking there was some middleware I missed, but still no luck. I tried using the avermedia SW and it successfully scanned and showed live TV.

Logs attached. Any ideas?