Am using GBPVR ver 1.3.11, I get my tv guide from an xml file generated by TVxb. I checked the xml file generated, and it has all the necessary info needed by GBPVR, this is the same file that I have been using before.
But earlier this week, any attempt to update GBPVR with the xml file results in an empty TV guide. I have updated via PVRX2 gui, and through the config program to no avail
I can control the menu in gbpvr with hip but when I go into live tv the up button on the remote which is the up key on the keyboard, can't change the channel or anything else. I have to use the keyboard instead and when I go back to the main menu I still can't control anything. So I have to restart gbpvr again to get it functioning.
For the past 5 years or so, I have been using the Hauppauge PVR-250 and GBPVR, v0.99.5, with good success. However, Comcast, which supplies my video over a cable, had some failure which (I suppose) put a glitch on the cable and damaged the PVR-250 card in my machine. Since the card was past the warranty date, I felt it best to buy a new video device. The HVR-1950 appeared to have what I needed, plus some new capabilities. The device attaches to the computer with a USB cable, which makes it usable on my laptop as well.
However, when I open GBPRV and click on Live TV, I get the following message:
"Failed to Locate Configured Capture Device".
Can anyone suggest how to use the new HVR-1950 with GBPVR? Thanks for any help.
I have been using mythtv for about a year, but recently switched to gbpvr. While I like mythtv, gbpvr is much easier to setup. I have gbpvr setup and running great. Thanks for this great app. My only question is regarding ISO files. I created a custom task in the config to rip a dvd to the hard drive (in ISO format) using dvd decryptor. The task works great and rips the ISO to my hard drive. I have also setup daemon tools in the config to play the ISO through gbpvr. When I play the ISO in gbpvr (through the videos plugin) the previews and the menu play great. But when I click, "play" to start the movie I get no video. I can hear the sound but see no video. Does anyone know what is causing this? I can get around this by going into the chapters menu and clicking on chapter 2 and skipping back to the beginning of chapter 1. Then I get video and sound. But if click on chapter 1 then I get the same (sound but not video) as when I hit "play" in the dvd menu. Is the a codec issue? Any help would be appreciated. Thanks.
A user wishes to record a program late at night (they will be asleep when recording happening)
They would like the recording to finish and after the recording has finished they want the
PC to shutdown to save electricity and the planet ....
Potential issues:
What if a user uses postprocessing.bat to do some handling after the recording?
1. If gbpvr knows when ever a postprocessing.bat has fininshed it can wait until then
then initiate a computer shutdown.
If 1 not possible
2. A timewait variable controlled through config.xml eg <shutdowndelay>3</shutdowndelay>
this would trigger a shutdown 3 minutes after the recording has finished.
Based on most of the posts Iâve read where users are having issues, it seems like the culprit has been the codec, or the lack there of.
So, can you please suggest which codec to use for each of the options in the Config | playback tab? Whether they cost $0 or otherwise, which ones work, or is best suited, or which ones you use?
Does anyone know how to turn down the record volume on a pvr150 with the latest drivers? (2_0_48_25037) For soem reason latley my recordings seem louder to the point that they clip, yet live tv through the same card is fine. Its just the recordings.
I managed to find the old tweak tool but it seemed to make the problem worse! Does anyone know the right registry settings?
I'd like to make the following offer if it would be of help (to both you and other UK users of GB-PVR)...
Regardless of people actually experiencing problems, either once a week/month, I can grab full .ts recordings of however many MBs you want from each of the six UK DVB-T multiplexes and store the files on a server that is connected 24/7 at 100Mbps. No logins or faffing about etc, just standard directory listings that you can point a browser at.
The same can be done for one or more satellite transponders (freesat/fta, astra only). Doing them all is probably a bit impractical, but I'm still getting my head around DVB-S and how it works.
My question is, I see in the screenshot on the above link a DiSEqC tab (greyed out) and would like to know if this config page in the application has settings for controlling a motorised dish. If it does, how do I actually input the different parameters for pointing the dish a certain direction for any given channel.
Any advice would be greatly appreciated. Is anybody using a motorised dish ?
Hey guys
i would like to say thanks in advance for any assitance you can give me on this.
i have a core 2 dual with 2GB mem and 2 PVR 150 MCE capture cards.
i am running a clean XP with only GBPVR installed.
i can record 2 shows at once and play 2 shows at once.
i can record and watch a HD movie without any high CPU or memory usage
but most of the time i watch live tv (analog only - antenna cable directly to the pvr 150), the audio and video are synced but after 2 minutes there is a growing delay. i then go back to the guide and watch again. it started ok and then the delay keeps growing and growing.
it happenes if i press "play" on the remote/enter the menu and select "watch". or move between the channels during live tv.
the only way i can watch live tv is to record the show and then wait a few seconds and start to watch the recording. then it is all ok.
i tried it with only one PVR card ( no change).
i tried it on a clean XP install ( no change).
i removed all the decoders and installed only ffdshow. (no change).
this happens most of the time on the same channels but that may be only an illusion.
i am pretty sure this has nothing to do with CPU, memory, hard disk speed or decoders as i have a friend with a more powerful setup and he use the RCA connector ( or S-video - tried them both) - and he has the same problem.
can anyone help or stir me in the right direction?
i am using the analog recording plugin and tried all the "quality profile settings" but still no dice
