hello,

I've a Hauppauge HVR 900[SIZE="4"]H[/SIZE] Tv-card
its a USB-device with a hybrid-receiver that can receive DVB-T and analoguous signals.

I was able to configure GB-PVR (1.3.11) to work with the DBT-channels, but I cant setup this nice program for the analog channels / tuner.

For this issue I added the HVR 900H to the direct.ini (analog devices ?!), and configured 2 capture devices - one fore DVB-T and one for analog on the same TV-card

Now the tuner-assistent shows me an TV-signal - but no audio-signal - because of: "ConnectPins failed" followed by a message: "Failed to connect pinNameCrossbarAudioDecoderOut to pinNameCaptureAnalogAudioIn"

For this try I modified direct.ini in the following way (filtercheck result is appended at the end of this post) - this section is a copy of the existing Hauppauge 900 Section (without H) in that file.

What can I do to enable both capture capabilities - the recorder service should switch to the analog-configuration for analog channels and to DVB-T config for all DBV-T channels

thanks

[Hauppauge HVR-900H]
ARCHITECTURE=88X
INIT_MODE=DEFAULT
INIT_MSP=0
SUPPORTS_FM_RADIO=1
BLACKBIRD=1
CONEXANT=0
ENCODER_DISCONNECT_BUG=1
FORCE_ENCODER=1
FILTER_CROSSBAR=WinTV HVR-900H Crossbar
FILTER_CAPTURE=WinTV HVR-900H Capture
FILTER_TV_TUNER=WinTV HVR-900H TVTuner
FILTER_TV_AUDIO=WinTV HVR-900H TVAudio
FILTER_CAPTURE_AUDIO=
FILTER_ENCODER=MainConcept (MCE) MPEG Encoder
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audio In
PIN_CAPTURE_PREVIEW_AUDIO_OUT=Video Virtual Out
PIN_CAPTURE_CAPTURE_OUT=Capture
PIN_CAPTURE_I2S_OUT=Audio
PIN_CAPTURE_656_OUT=Capture
PIN_ENCODER_I2S_IN=Input Audio
PIN_ENCODER_656_IN=Input Video
PIN_ENCODER_OUT=Output
PIN_WRITER_INPUT_IN=Input


FilterCheck.log:
19:46:01.437 INFO Log started
19:46:01.437 INFO Filter Check v1.0
19:46:01.437 INFO
19:46:01.437 INFO
19:46:01.437 INFO Checking AM_KSCATEGORY_CAPTURE filters
19:46:01.500 INFO found: SoundMAX Digital Audio
19:46:01.515 INFO - (input) DAC
19:46:01.515 INFO - (output) DAC
19:46:01.515 INFO - (output) Aufnahme
19:46:01.515 INFO - (input) ADC
19:46:01.515 INFO
19:46:01.515 INFO found: Logitech QuickCam Communicate
19:46:01.546 INFO - (output) Capture
19:46:01.546 INFO - (output) Standbild
19:46:01.546 INFO
19:46:01.546 INFO found: Logitech Mic (Communicate)
19:46:01.562 INFO - (output) Capture
19:46:01.562 INFO - (input) Mikrofon
19:46:01.562 INFO
19:46:01.562 INFO found: WinTV HVR-900H Capture
19:46:01.562 INFO - (output) Capture
19:46:01.562 INFO - (output) VBI
19:46:01.562 INFO - (output) Audio
19:46:01.562 INFO - (input) Analoger Videoeingang
19:46:01.562 INFO - (input) Lautstärke
19:46:01.562 INFO
19:46:01.562 INFO
19:46:01.578 INFO
19:46:01.578 INFO Checking AM_KSCATEGORY_ENCODER filters
19:46:01.578 INFO
19:46:01.578 INFO
19:46:01.578 INFO Checking AM_KSCATEGORY_CROSSBAR filters
19:46:01.578 INFO found: WinTV HVR-900H Crossbar
19:46:01.593 INFO - (input) 0: Video Tuner In
19:46:01.593 INFO - (input) 1: Video Composite In
19:46:01.593 INFO - (input) 2: Video SVideo In
19:46:01.593 INFO - (input) 3: Audio Tuner In
19:46:01.593 INFO - (input) 4: Audio Line In
19:46:01.593 INFO - (output) 0: Video Decoder Out
19:46:01.593 INFO - (output) 1: Audio Decoder Out
19:46:01.593 INFO
19:46:01.593 INFO
19:46:01.593 INFO
19:46:01.593 INFO Checking AM_KSCATEGORY_TVTUNER filters
19:46:01.625 INFO found: WinTV HVR-900H TVTuner
19:46:01.640 INFO
19:46:01.640 INFO
19:46:01.656 INFO
19:46:01.656 INFO Checking AM_KSCATEGORY_TVAUDIO filters
19:46:01.656 INFO found: WinTV HVR-900H TVAudio
19:46:01.703 INFO - (input) TVAudio In
19:46:01.703 INFO - (output) TVAudio Out
19:46:01.703 INFO
19:46:01.703 INFO
19:46:01.703 INFO
19:46:01.703 INFO Checking AM_KSCATEGORY_VBICODEC filters
19:46:01.718 INFO found: NABTS/FEC VBI-Codec
19:46:01.750 INFO - (input) VBI
19:46:01.765 INFO - (output) NABTS
19:46:01.765 INFO - (input) HWNABTS
19:46:01.765 INFO
19:46:01.781 INFO found: Untertiteldecoder
19:46:01.812 INFO - (input) VBI
19:46:01.812 INFO - (output) CC
19:46:01.812 INFO - (input) HWCC
19:46:01.812 INFO
19:46:01.812 INFO found: WST-Codec
19:46:01.875 INFO - (input) VBI
19:46:01.875 INFO - (output) Videotext
19:46:01.875 INFO
19:46:01.875 INFO
19:46:01.875 INFO
19:46:01.875 INFO Checking KSCATEGORY_BDA_NETWORK_TUNER filters
19:46:01.906 INFO found: WinTV HVR-900H BDA Tuner
19:46:01.937 INFO - (input) Input0
19:46:01.937 INFO - (output) MPEG2-Transport
19:46:01.937 INFO
19:46:01.937 INFO
19:46:01.937 INFO
19:46:01.937 INFO Checking KSCATEGORY_BDA_RECEIVER_COMPONENT filters
19:46:01.984 INFO found: BDA Slip De-Framer
19:46:02.031 INFO - (input) NABTS
19:46:02.031 INFO - (output) IPv4
19:46:02.031 INFO
19:46:02.046 INFO found: BDA MPE-Filter
19:46:02.062 INFO - (input) MPE
19:46:02.062 INFO - (output) IPv4
19:46:02.062 INFO
19:46:02.078 INFO found: WinTV HVR-900H BDA Capture
19:46:02.171 INFO - (input) Input0
19:46:02.171 INFO - (output) MPEG2-Transport
19:46:02.171 INFO

I cant find my new Hauppauge WinTV Nova-T 923(909) in the tuning assistant
so what do I use to scan the channels?

I have one of the above DMB-TH USB sticks which I'm trying to add to GBPVR. However when running "Map digital channels to EPG channels", it crashes with an unhandled interrupt error.

TIA.

I've added the following to dba.ini:

[Magic Pro]
TUNING_TYPE=DVB-T
FILTER_TUNER=Digital TV
FILTER_CAPTURE=Conexant Livewire AVStream TS Capture
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport

The filtercheck.log is as follows:

00:38:30.171 INFO Log started
00:38:30.171 INFO Filter Check v1.0
00:38:30.171 INFO
00:38:30.171 INFO
00:38:30.171 INFO Checking AM_KSCATEGORY_CAPTURE filters
00:38:30.171 INFO found: SigmaTel Audio
00:38:30.187 INFO - (input) PC Speaker
00:38:30.187 INFO - (output) DAC
00:38:30.187 INFO - (input) SPDIF Interface
00:38:30.187 INFO - (input) ADC
00:38:30.187 INFO - (output) Recording Control
00:38:30.187 INFO
00:38:30.187 INFO found: Analog TV
00:38:30.203 INFO - (input) Analog Video In
00:38:30.203 INFO - (input) Analog Audio In
00:38:30.203 INFO - (output) Capture
00:38:30.203 INFO - (output) Audio Out
00:38:30.203 INFO - (output) VBI
00:38:30.203 INFO
00:38:30.203 INFO
00:38:30.203 INFO
00:38:30.203 INFO Checking AM_KSCATEGORY_ENCODER filters
00:38:30.203 INFO
00:38:30.203 INFO
00:38:30.203 INFO Checking AM_KSCATEGORY_CROSSBAR filters
00:38:30.203 INFO found: Conexant Livewire Crossbar
00:38:30.218 INFO - (input) 0: Video Tuner In
00:38:30.218 INFO - (input) 1: Video Composite In
00:38:30.218 INFO - (input) 2: Video SVideo In
00:38:30.218 INFO - (input) 3: Video YRYBY In
00:38:30.218 INFO - (input) 4: Audio Tuner In
00:38:30.218 INFO - (input) 5: Audio Line In
00:38:30.218 INFO - (output) 0: Video Decoder Out
00:38:30.218 INFO - (output) 1: Audio Decoder Out
00:38:30.218 INFO
00:38:30.218 INFO
00:38:30.218 INFO
00:38:30.218 INFO Checking AM_KSCATEGORY_TVTUNER filters
00:38:30.218 INFO found: Conexant Livewire Tuner
00:38:30.218 INFO - (output) Analog Video
00:38:30.218 INFO - (output) Analog Audio
00:38:30.218 INFO
00:38:30.218 INFO
00:38:30.218 INFO
00:38:30.218 INFO Checking AM_KSCATEGORY_TVAUDIO filters
00:38:30.218 INFO found: Conexant Livewire TvAudio
00:38:30.218 INFO - (input) TVAudio In
00:38:30.218 INFO - (output) TVAudio Out
00:38:30.218 INFO
00:38:30.218 INFO
00:38:30.218 INFO
00:38:30.218 INFO Checking AM_KSCATEGORY_VBICODEC filters
00:38:30.218 INFO found: NABTS/FEC VBI Codec
00:38:30.250 INFO - (input) VBI
00:38:30.250 INFO - (output) NABTS
00:38:30.250 INFO - (input) HWNABTS
00:38:30.250 INFO
00:38:30.250 INFO found: CC Decoder
00:38:30.265 INFO - (input) VBI
00:38:30.265 INFO - (output) CC
00:38:30.265 INFO - (input) HWCC
00:38:30.265 INFO
00:38:30.281 INFO found: WST Codec
00:38:30.296 INFO - (input) VBI
00:38:30.296 INFO - (output) Teletext
00:38:30.296 INFO
00:38:30.296 INFO
00:38:30.296 INFO
00:38:30.296 INFO Checking KSCATEGORY_BDA_NETWORK_TUNER filters
00:38:30.296 INFO found: Digital TV
00:38:30.296 INFO - (input) Input0
00:38:30.296 INFO - (output) MPEG2 Transport
00:38:30.296 INFO
00:38:30.296 INFO
00:38:30.296 INFO
00:38:30.296 INFO Checking KSCATEGORY_BDA_RECEIVER_COMPONENT filters
00:38:30.296 INFO found: BDA Slip De-Framer
00:38:30.296 INFO - (input) NABTS
00:38:30.296 INFO - (output) IPv4
00:38:30.296 INFO
00:38:30.312 INFO found: BDA MPE Filter
00:38:30.312 INFO - (input) MPE
00:38:30.312 INFO - (output) IPv4
00:38:30.312 INFO
00:38:30.312 INFO found: Conexant Livewire AVStream TS Capture
00:38:30.312 INFO - (input) MPEG2 Transport
00:38:30.312 INFO - (output) MPEG2 Transport
00:38:30.312 INFO

I have posted other questions but decided I have bitten off more then I can chew for the moment. I have gbpvr and a helius MVP. I have just figured out how to get these to work together to play my GBPVR recorded shows and avi files so long as they are local (see question #3). This finally all works. So some basic questions now to start with before i tackle things like playing vob's again:

1) I have an extensive list of videos (over 1000 titles) is there any way to page down and page up from the mvp? Perhaps a plugin that handles navigation differently?

2) How does one multi tag mp3 files on the mvp aka tag 10 or so files to load into a temporary play list. Also see question one... How does one use a page down or page up function to cycle through long lists of mp3 files on the mvp?

3) I have a pc whose only function is to record shows. The MVP is run through gbpvr but on a separate pc and separate install. In the video library on the MVP pc I point to the recorded shows directory on the recording pc (yes it is shared and the permissions are all in order). When on the MVP I can see the folder but when I click to go into the folder nothing happens. Is there a better way to do this? How can I play my recorded shows from the mvp directly off the recording pc.

Fatman / Hairy: This is the current UI for the "applier" exe. Is this style ok or is more information required or would be useful?

For example, log file info / progress bar / status info. If you have any ideas then feel free to post below.

I had everything working yesterday but today the channels do not change thru TV GUIDE (using keyboard to select channels in the keyboard).

Observations:

1. The TV GUIDE loading is extremely slow!
2. Yesterday when I selected a channel from the GUIDE the USBUIRT would send appropriate signals to my STB and worked but today the USBUIRT is not sending any signals!

Got the following error when exited from GBPVR.

Enclosed the logs as well.

I wondering if there is a USB capture device the does hardware encoding.

I only have 1 PCI slot (small form Dell) and I want to be able to capture the output from 2 STBs. I think the CPU is a little underpowers so I would prefer to have hardware encoding.

Thanks for any suggestions on how I would be able to capture from 2 STBs.

Hi all.

With your help, I have successfully installed GBPVR.

1) Can you please inform how can I view my card's A/V input in GBPVR? (Devices connected through AV cable such as a VCR, DVD, Dish receiver etc.).

2) How to record from one channel while viewing the other? Or simultaneous and manual (non-scheduled) recording from two channels?

3) Also, I have a feeling that the picture quality looks somewhat not at par with that from Hauppauge's WinTV (more snow and lines).

Thanks for help and regards.
Amer

Hi,

I have a scheduled task set to run a XMLTV GUI once a day and grab new listings, and have GVPVR set to do a full EPG reload. If my internet connection happens to be down when the grab is scheduled then I end up with an empty EPG.

Is there any possible way of making XMLTV GUI abort the grab when the connection is down, rather than making me a less than useful xml file?

Youtube has made a website for consoles like PS3 and Wii to stream stuff to TV. Isnt it possible to make a plugin for this on GB-PVR?

http://www.youtube.com/tv

Dutch link:
http://www.bright.nl/youtube-wii-en-ps3-op-tv