Im trying to install the second tuner on my Nova T 500 card and Gbpvr always gives me the error the card is in us and to quit the program ......never had this problem before was always able to install both tuners....any suggestions
I am in the UK and watching DVB via a Hauppauge Nova-T I know some multiplexes have a low signal and every now and then this causes the low signal dialog to pop up and PVRX2 then stops responding. Is this the way that the program is supposed to behave on low signal?
Any suggestions to achieve a more graceful behaviour?
I am using 1.3.7 on a Dell Dimension 4600. If I select a program to record then place the system in standby it wakes up and records but when I play the recorded program there is no sound. If I do not place the system in standby everything works as it should. I have tested this carefully and it is 100% reproducible. Any suggestions? Thanks.
Hi I have a DVB-T Nova-500 and am happily recording into the Microsoft format and playing back.
However I don't appear to have mux to make the MP3 files, so consequently the mux tools of subs doesn't show any available encoders and MVP menus work but I can't play back any content.
I've looked at the several threads over the years (and previously had found an encoder which worked but since a recent rebuild I can no longer find it).
The links to the few downloads refered to in threads here seem to now be broken or when unzipped updates to the software mean the encoders mentioned no longer appear there.
I'm happy to buy something if someone can point me to the correct piece of software that I need to buy to ensure I get a working Mux.
Hello all, I have been trying to get gbpvr working for the last 2 week, everything seems to be ok, thank to all the documentation available, I am very happy overall, and I should take the oportunity to thank everyone who has contributed in any way for keeping the forum full of valuable information.
I have a problem with channel searching, I can not get some particular channels in hispasat. witch I find quite easy when searching manually with powercinema.
the satelite details are:
<transponder frequency="12012000" symbol_rate="3000000" polarization="1" fec_inner="3" broadcast_type="DVB-S2" modulation="8PSK" pilot="0" rolloff="35" />
and
<transponder frequency="12052000" symbol_rate="3000000" polarization="1" fec_inner="3" broadcast_type="DVB-S2" modulation="8PSK" pilot="0" rolloff="35" />
also
<transponder frequency="12092000" symbol_rate="3000000" polarization="1" fec_inner="3" broadcast_type="DVB-S2" modulation="8PSK" pilot="0" rolloff="35" />
Package details can be found at hxxp://www.lyngsat.com/packages/meo.html
As I said I have tried pretty much everithing, and did a lot of reading, I apologise in advance in case this issue as been discussed and there is a answer somewhere in the forum or wiki pages, there is a lot of thing I still need to understand, having said that, I really tried very hard with several diferent setting, normally the way I see it, should be enought to include in the DVB-S folder, in hispasat file the S2 details, witch I did, and did not do the job.
52=12012,H,30000,34,S2
57=12052,H,30000,34,S2
65=12092,H,30000,34,S2
I found every other channel available in the satelite, inclusive the AC3 from spanish HD.
It seems is not scanning modulation 8PSK.
As I said it scans ok when searching manually with powercinema from cyberlink.
I tested the hardware, the card shows as being a Hauppauge HVR-4000 (DVB-S/S2) device, having used the filtergrath, is shows exatly the same details as for my card, so it should be ok.
My last attempt was the xmltv, thinking maby if I could get one, maby I could change some details manualy, but no luck, could not get it working, and could not found one allready made.
I think this is all the info about my problem, should any logs, or any extra info be necessary, please let me know.
I hope there is a solution.
Just one other thing, maby I am doing something wrong, but on the GUI, I can not access settings, it tries to go there, but comes back to main menu, not alowing to do anything on settings, from what I could see, maby it would not solve my problem, because it seems is no satelite or channels configuration there.
Thank you all for any possible help.
I'm currently running 1.2.13 and have been having the following problem for a while. I've just been lazy in fixing it. Now with the upgrade I'm thinking I should try and fix it.
I'm at work at the moment so I can't show you any logs but will attach some later when I get home.
So the problem, When watching a recording sometimes GBPVR crashes and is forced to close by Windows (XP) The error message says something about .NET so I'm actually guessing its not Subs problem, more something with .NET. It only happens sometimes (actually getting a bit more regular now) It may happen two or three times before it will let me watch the program. but generally it will let me watch a whole file.
So Assuming there is something wrong with .NET and I need to reinstall it Whats the best way to do it, bearing in mind that I want to maintain all my settings in GBPVR as far as possible!
I'm guessing stop recording service, Uninstall everything .net related version 1, version2 and version 3, and then reinstall them all.
Once I've done that I can install the new version of GBPVR and hopefully all should be fine.
I guess my question is will uninstalling .net b reak the install of GBPVR or will it sort itself out once I reinstall .net?
Just wondering how others are finding the ts mux with a client and multi record setup
a few of my findings so far
on the client i had to select multi record and the ts-mux so that the tv guide would work other wise it would tell me i had no tuners....do you want to watch XXXX been recorded
file sharing works well over wire can even watch live
so its great becuase streaming is a pain when trying to fast forward
wireless i had to turn on packed burst but now it is fine aswell
takes a bit longer for the tv guide to show red once a recording is set to record but gets there in the end
fast forward can be a bit strange on some recordings it jumps backward but not on all recordings so i will see if i can find a patern on that
thats it for now be interested in what others think but im liking the ts files
another thing you may need to do is cancel all recordings and re-add them after you upgrade to multi-record otherwise it will try and record 2 programs from different muxes on the one mux you will end up with 0kb files