I know I’m perhaps asking something unfeasible, but in my opinion it would be a good idea to make last of the old GBPVR releases available (99.12) and related patches to be downloadable as well. This would let people having slow speed PC’s to enjoy with GBPVR.
I found 99.12 is available at this address http://www.gbpvr.com/GBPVR09912.msi while related patches have been deleted, but why don't let all available in a dedicated page?
Of course all without support in case of troubles.

Not sure if I am posting this in the right forum.

I have a universal LG remote control that came with my telly. Curently the LG Remote used to operate the Tv and the Hifi. The Comrp remote is used to work GBPVR. Is it possible to use the LG remote in place of my Compro Videomate reomote?

If so do I have to enter a manufacturer remote control code for the Compro code? When i set up the remote control for the Hifi, I had to enter a 3digit code into the remote so that i would send the correct commands to the HiFi. If so where can I find the code for Compro?

Currently the Compro remote works with GBPVR using HIP. But due to the WAF it would be better just to use the one remote to do everything.

Many thanks

I have noticed an odd problem lately and wanted to check if anyone else has seen similar behaviour.

When I go into the config app from the tray app's menu, the config is munged with the decoders set at system default and the plugins menu structure is all "flat" in the root rather than having any submenus.

If I close GBPVRtray and then reload config then it all goes back to normal. If I restart the tray app then it stays OK until some undetermined point in the future.

Has anyone got hardware acceleration with the onboard graphics of an Intel G45 working with gbpvr? More specifically for FreeviewHD in NZ?

-Matt

Anyone know if this remote and receiver would be a dropin replacement for the Microsoft MCE remote? They are supposed to be compatible, but would it work with GB-PVR (without the need for HIp or whatever)?

The net radio plug in is pretty cool!

I figured out how to add a station to the favorites, but is there a way to create a section in the "web" area? Specifically I'd like to create a folder for old time radio stations.

Also, the remote control volume control doesn't work for net radio?

Thanks!

Steve

I though I'd post this in case others come across it. One of my clear QAM HD stations stopped working on PVRx2 but it recorded fine and I could watch recording in progress and also play from the PCH. I did the whole decoder and mux roulette thing but no luck. It turns out that the audio and video PID's had changed and I guess for recordings the PID's aren't even used but in preview mode they are quite important.

Martin

Hello,

I just purchased a Pinnacle PCTV HD stick (801e SE) and I am trying to get it to work with GB-PVR. There doesn't seem to be a device that matches that model exactly. I have tried Pinnacle PCTV HD (QAM) and all of the ones that have stick in the name...still no luck. When I have show only devices detected it gives me a Gigabyte GT-U7000-RH and EMTEC 810. Those don't work either. The stick works with the bundled software, but I don't like that software much.

Here are my system specs:
Windows Vista Home Premium x64 SP1
Intel 2.4GHz Quadcore
8GB RAM

Thanks!

Corey Kinard

I'm trying to tune my HVR4000 into the Optus D1 HD transponders. I have done this sucessfully using MyTheatre, but it seems to be a no go with GBPVR. Both under XP ...

I have changed 1601.ini to

[SATTYPE]
1=1601
2=Optus D1 Test (DONT USE)
[DVB]
0=2
1=12331,H,22500,23,xyz
2=12358,H,22500,23,xyz

and for xyz have tried
38, 166, 46, 174, 54, 182, 62, 190, which I believe is every combination of pilot & roll off with spectral inversion set to auto, and the modulation set to 8PSK.

The config log has the following lines

2008-09-08 13:49:29.546 VERBOSE BDARecorder::ScanTransponder(T:12331,H,22500,23,46)
2008-09-08 13:49:29.546 VERBOSE SubmitTuningRequest(T:12331,H,22500,23,46)
2008-09-08 13:49:29.546 VERBOSE getSetting(BDASubmitTuningRequestAlways)
2008-09-08 13:49:29.546 VERBOSE BDASubmitTuningRequestAlways is true. Forcing...
2008-09-08 13:49:29.546 VERBOSE DVB-S2 modulation:0x02 system:0x01 roll-off:0x01 spectral-inversion:0x01 pilot:0x00
2008-09-08 13:49:29.546 VERBOSE Submitting new Tuning Request
2008-09-08 13:49:29.546 VERBOSE BDA_MOD_NBC_8PSK modulation (for Hauppauge DVB-S2)
2008-09-08 13:49:33.609 VERBOSE New tuning request submitted...
2008-09-08 13:49:33.609 VERBOSE Failed to set modulation type to 32
2008-09-08 13:49:33.609 VERBOSE Doing Hauppauge DVB-S2 tuning
2008-09-08 13:49:33.609 VERBOSE SendPilotRollOff_Hauppauge
2008-09-08 13:49:33.609 VERBOSE About to set pilot=off
2008-09-08 13:49:33.609 VERBOSE Failed to set pilot
2008-09-08 13:49:33.609 VERBOSE About to set rolloff 0.25
2008-09-08 13:49:33.609 VERBOSE Failed to set rolloff
2008-09-08 13:49:33.609 VERBOSE SendPilotRollOff_Hauppauge completed

Which just might be the problem ...

Has anyone else got this working?

does anyone know if you can write a plugin in .net 3.5?