I've noticed since upgrading to 93.13 that my skin is a little off, computer side is fine, it's only the MVP side. Generally i use the fat blue hi vis skin. I get a white line across the screen from the enlarged button (the center one) going all the way to the right and off the screen. I have no idea what's causing it. I tried a couple of other skins just to test and the fat blue is the only one i see it happening on.

It's mostly noticable on the main screen but is aparent on other screens as well. mostly the ones that have a white bottom on the button. I've attched a crude capture from my tv set. you can sort of see it but it's hard getting a non fuzzy screen capture off the mvp screen. But it's just below the recordings button going through the task image and off the side of the screen. Any ideas what might be causing this?

I'm trying to re-create a very useful funtion that was included in the Happauge MVP software. The original software that came with the MVP had a shuffle option, so for example, my daughter has a directory with 50 cartoons in it, she could select shuffle and get a different play order each time. All we have now is a play all option which means she always sees the same ones (typically she'll only want to watch 4 or 5 in one sitting). My Videos has a playlist option but I'm not totally sure how all the options on that work and can't find detailed instructions (what does stacking do?). Ideally I'd like to be able to create a daily, random, playlist outside of GBPVR and then be able to play that....

Any ideas gratefully received.

I am using two capture devices - pvr-250 and pvr-usb2. I want to use regular cable on the 250 and s-video from a digital cable box for the usb (I find the tuner is better on the 250). How do I get two different channel lineups? Do I have to create two separate zap2it accounts or should I be asking how to I add another lineup to my exisiting zap2it account?

Thanks

Hi,

I'm scanning all channels to be sure I get everything - choosing only 1 transmitter leaves loads of channels out. I'm in York.

I'm missing stuff like BBC 3&4, E4+1, etc, although I do have some duplicate channels with no audio. WinTV2000 can tune everything fine, with a good signal.

I'm using WinTV nova-t USB2, BDA to tune (with correct selection for the WinTV usb2). EPC source is Bleb UK.

Anyone any idea how to fix? I saw a reg hack somewhere for manual tuning, but it looks a real nightmare to implement.

Thanks,

TT

Hey guys,

Great Community - and great program Sub. I messed around for days trying to get MythTV going but I suck and couldn't get it to work, so I have turned to Windows and GBPVR.

I have evrything running well, guide, some extra plugins, live TV works well, I have done Record on Demand and it has worked and I have setup some programs to be recorded through the guide. Just wanted to also point out the setup took all of 15 minutes untill it was fully functional, yeah!

Now, my only real issue at this point is my IR Blaster. I have the following Hardware:

Starchoice Satellite Reciever
HTPC - (PVR-150 model 1045 with remote and connected IR Blaster, On Board sound out, Nvidia gf4 mx 400 for TV Out via Svideo)
Hitachi A/V Reciever
36" TV

So I start up windows fresh, IR.exe starts up in my startup group. I launch GBPVR and the remote works perfectly, all functions work as they should.

I program a recording for a different channel at a future time. Everything works well, GBPVR changes the channel on my Sat Reciever when the recording is to begin via the IR Blaster. Everything is still good untill the recording is done, and then the IR blaster completely locks up.

I can change things within the PVR software fine, the remote still responds, but the IR Tranciever that sits of the IR reciever on my Satellite STB dosn't work untill I exit GBPVR and restart IR.exe. I can reproduce this bug on a consistent basis, it happens evrytime GBPVR changes a channel to start a recording.

Any suggestions? Thanks in advance!

Ok, I see lots of posts debating which Codecs are best, and also registry settings to configure the Codecs. But with a setup that uses a Hauppauge 350, and an MVP, am I using any codecs? I understand that the decoding is done with MVP hardware, and I THINK the 350 card encodes it in hardware also. Is this correct? If so, is there any way for me to 'tune' them to work better on my system?

:confused:

Thanks!

Jim

Hi folks... I would really appreciate if you guys could support the PowerView TV Tuner card. When I saw "and lots others" in your list of supported cards, I was pretty hopeful, but upon installing the software, it didn't work for me.

I'm also willing to make a donation if you guys can pull this off.



More information on the card can be obtained by clicking the following link:
http://www.factorydirect.ca/catalog/prod...ode=PO0010

Thanx and anxiously awaiting.

Robin

Hi, I have a very weird one.....I have been using GBPVR with a PVR-150 card for a week, and now I realize certain chanels don't have audio. These channels are from 16 to 20. I'm in Canada and configured the line-up via zap2it.

Any help is appreciated.

Thanks.

I'm using a custom task that adds a button to the GBPvr menu to update my xmltv file. Is it possible to configue the same button to also update the epg when it has finished updating the xmltv file? as i tend not to leave the pc on for it to automatically update so it would be very handy to be able to just press one button in the menu to update both files in one go.
many thanks

In the last day or so, I've had TV stop right after switching to the next program, and I get an "Error playing back file" error.

Here's the error from the GB log:

Quote:9/28/2005 1:00:04 AM.250 ERROR [2] Error: msg=0x8001 hwnd=0xe0110 wparam=0x0 lparam=0x0 result=0x0 : System.Exception: Failure playing back file
at NativeUtilities.MediaHelper.playVideoFile(String filename, Form form)
at xae10db17d26ba033.xbe83d16b02243330.playbackEnded()
at xae10db17d26ba033.xbe83d16b02243330.OnGraphNotify()
at xae10db17d26ba033.xbb1566157f5f8b1f.WndProc(Message& x5f8f2c40c000ab2c)

Quote:01:00:03.609 INFO DirectShowPlayerBase::playVideoFile(D:\captv_studio\Live\Crossing Jordan_1_20050927_23000000.mpg)
01:00:04.015 VERBOSE Stopping previous graph
01:00:04.046 VERBOSE Creating new graph
01:00:04.046 VERBOSE getSetting(PreferredAudioRenderer)
01:00:04.109 VERBOSE getFileFPS() unable to open file, defaulting to 30fps
01:00:04.109 VERBOSE getSetting(PreferredAudioDecoder)
01:00:04.125 VERBOSE audio decoder filter: InterVideo NonCSS Audio Decoder for Hauppauge
01:00:04.125 VERBOSE getSetting(PreferredDecoder)
01:00:04.125 VERBOSE video decoder filter: InterVideo NonCSS Video Decoder for Hauppauge
01:00:04.140 VERBOSE getSetting(ListGraphFilters)
01:00:04.140 VERBOSE Graph contains the following filters:
01:00:04.140 VERBOSE - InterVideo NonCSS Video Decoder for Hauppauge
01:00:04.140 VERBOSE - InterVideo NonCSS Audio Decoder for Hauppauge
01:00:04.140 VERBOSE - Video Renderer
01:00:04.140 VERBOSE getSetting(SaveGraphFiles)
01:00:13.156 INFO DirectShowPlayerBase::playVideoFile(D:\captv_studio\Live\Full Metal Alchemist_1_20050928_01000130-2.mpg)

Quote:22:42:10.359 VERBOSE waited: 1 (1127875330 - 1127875329) filesize: 192448
22:42:10.468 VERBOSE waited: 1 (1127875330 - 1127875329) filesize: 276416
22:42:10.468 VERBOSE Creating new graph
22:42:10.468 VERBOSE getSetting(PreferredAudioRenderer)
22:42:10.500 VERBOSE getSetting(PreferredAudioDecoder)