problem with second bda-receiver

[mz-system]

hi sub

i´ve this working system:
- windows 2003 server
- gbpvr 0.98.8b
- terratec cinergy 1200 dvb-c (bda-driver 4.8.15)

everything works.
after i build in a second dvb-card (cinergy 1200 dvb-c)
recordings and tv don´t work (the second card isnt
configured yet). even after configuring/re-configuring
the second / first dvb-card recordings and tv.....
mapping digital channels only works with one card. are
both cards in the system the tuning seems don´t work
(on both cards).


the system itself works with both dvb-cards (tested with
dvdviewer).

any idea?

greetings

[mz-system]

i´m still searching for the problem.
in an other thread i find the "hack" with

<BDAAutoDetectTuner>false</BDAAutoDetectTuner>

but this didn´t work.
the problem seems that gbpvr not build the graph right (attached
screenshot from graphedit).

parts of config.exe-native.log:

12:34:41.524 VERBOSE About to render GB-PVR Flow Status pin
12:34:41.524 VERBOSE About to setup IVideoWindow
12:34:41.931 INFO Starting graph...
12:34:42.337 ERROR Failed to start BDA Graph
12:34:42.337 VERBOSE ERROR_DEVICE_NOT_CONNECTED
12:34:42.509 VERBOSE locked=0 present=1 strength=0 quality=0
12:34:42.509 VERBOSE getSetting(ListGraphFilters)
12:34:42.524 VERBOSE Graph contains the following filters:
12:34:42.524 VERBOSE - Default DirectSound Device
12:34:42.524 VERBOSE - Video Renderer
12:34:42.524 VERBOSE - BDA MPEG2 Transport Information Filter
12:34:42.524 VERBOSE - MPEG-2 Sections and Tables
12:34:42.524 VERBOSE - GB-PVR DVB Subtitles
12:34:42.524 VERBOSE - GB-PVR PSI Parser
12:34:42.524 VERBOSE - Cinergy 1200 DVB-C Tuner (BDA)
12:34:42.524 VERBOSE - CyberLink Audio Decoder
12:34:42.524 VERBOSE - CyberLink Video/SP Decoder
12:34:42.524 VERBOSE - Microsoft DVBC Network Provider
12:34:42.524 VERBOSE - MPEG-2 Demultiplexer
12:34:42.524 VERBOSE - Cinergy 1200 DVB-C Capture (BDA)
12:34:42.524 VERBOSE getSetting(SaveGraphFiles)
12:34:42.587 VERBOSE BDARecorder::StartRecording() finished

thx for help

[sub]

Did you set the device numbers correctly on each capture source (ie, one #1, the other #2)? This log only shows an attempt to access #1, which fails with this ERROR_DEVICE_NOT_CONNECTED message.

Also, are you sure the drivers support more than one device at a time? Some dont.