Just upgraded to v3.6
Nice work alibert!
Thank You

I don't know if my upgrade to 2.4.3 or switching to HDHomeRun dual tuner causes this problem, but a lot of recordings now won't play back after 2 seconds, or some have completely wrong recording lengths. This does not happen for all recordings. The info for some recordings says "[No errors, but no data delivered. This is usually because the device failed to lock a signal.]" and there is no Play button. This may be the message from TV Listings plugin. The video file is indeed 0 KB.

I missed the part in the 2.4.3 sticky about HDHomeRun and adding a firewall exception, so I have now done that. I have also realized that NPVR asked me if I wanted to copy channel lineup from my Hauppauge device to the HDHomeRun, and I said yes. Maybe there is a bug in that code? I will remove my HDHomeRun channel data and let it scan for the channels.

When I use VideoLan to play the .ts file in question, it gets stuck at the same 2 second mark, but then suddenly plays again at 8 seconds.

Attached is my npvr.log file. I will test more tonight to see if the firewall exception makes the problems go away.

HI

Looks like my motherboard has died.

So I'll probably look at a new MB/CPU/Ram combo - integrated graphics. Most of these Motherboards are pretty light on PCI slots. I'll use one for a HVR3000 DVB-S cards, and thinking about a HDHomeRun or Dual DVB-T

Any issues with this setup?

I have 3.60 installed and NPVR.log has the debug msg "Element not found:" -- should I be concerned?

2012-03-31 17:33:40.014 [DEBUG][18] TV Listings: RecordingSchedule: update procedure starting.
2012-03-31 17:33:40.031 [DEBUG][18] TV Listings: RecordingSchedule: detected change in playback positions.
2012-03-31 17:33:40.039 [DEBUG][18] TV Listings: RecordingSchedule: updated '[8358] General Hospital [1877120] (c_7233, 3/30/2012 2:00 PM - 3:00 PM)'.
2012-03-31 17:33:40.039 [DEBUG][18] TV Listings: RecordingSchedule: detected change in scheduled recordings.
2012-03-31 17:33:40.039 [DEBUG][18] TV Listings: RecordingSchedule: finished updating recording schedule, broadcasting changes.
2012-03-31 17:33:40.039 [DEBUG][18] TV Recordings: Panel: recording schedule changed, updating.
2012-03-31 17:33:40.043 [DEBUG][18] Element not found: /Skin/Element[@name="ListSelectionMetaData"]
2012-03-31 17:33:40.043 [DEBUG][18] Element not found: /Skin/Element[@name="ListSelectionMetaData"]
2012-03-31 17:33:40.044 [DEBUG][18] Element not found: /Skin/Element[@name="ListSelectionMetaData"]
2012-03-31 17:33:40.044 [DEBUG][18] Element not found: /Skin/Element[@name="ListSelectionMetaData"]
2012-03-31 17:33:40.056 [DEBUG][18] TV Listings: DeferredImageLoader [General Hospital]: collecting image urls...
2012-03-31 17:33:40.057 [DEBUG][18] TV Listings: DeferredImageLoader [General Hospital]: collected 'F:\General Hospital\General Hospital_20120330_14001500.jpg'
2012-03-31 17:33:40.057 [DEBUG][18] TV Listings: ImageCache: successfully retrieved 'F:\General Hospital\General Hospital_20120330_14001500.jpg' directly.
2012-03-31 17:33:40.057 [DEBUG][18] TV Listings: DeferredImageLoader [General Hospital]: Image loaded, notifying caller.
2012-03-31 17:33:40.062 [DEBUG][1] Element not found: /Skin/Element[@name="ListSelectionMetaData"]
2012-03-31 17:33:40.062 [DEBUG][1] Element not found: /Skin/Element[@name="ListSelectionMetaData"]

I've experienced 3 client freezes during Live TV on a Client since 2.4.3. It's always been pretty solid prior. I wasn't doing anything during this, just while watching the picture freeze frames and the audio goes out.

The only way to recover is Ctrl+Alt+Del and force close NextPVR.exe.

Logs attached.

Hi. first of all thanx for this great program!!
I`m scheduling a manual recording in the early morning of tomorrow e.g. from 0.50 to 3.00 it says that they are 1300 minutes instead of 130. and fails the scheduling removing this from pending. if i schedule something for today it works fine.
thanx in advance.

I just switched my setup to Win7 from XP. Under XP IRSS controlled the USB-UIRT perfectly. Under Win7 I can't seem to get the -zone parameter to work.

I'm using these options

-host localhost -port Port_1 -channel {channel}

All three emitters fire no matter what I put for the port as if I'd used zero (all ports). Any ideas what's going on?

Edit: Translator works for individual ports but calling from the command prompt does all three ports.

Hi,

I'm having some problems with recurring recordings.
Using Win7 x64 and NPVR 2.4.3.

Noticed that if I manual set a recurring recording with a start time between midnight 12am to morning 7.59am, end time can be any time(maybe 1 or few hrs later), records week days (monday to friday), NPVR will set the pending recording to record from Tue to Sat.

Example :
OK setting : start time 8.00am to end time 9.00am
This setting will record from Monday To Friday correctly.

Not OK setting : start time 7.59am to end time 9.00am
This setting will NPVR record from Tuesday To Saturday instead of Monday To Friday.



Another problem for me is that all my manual recurring recordings have stopped recording after about a week or so.
They didn't appear inside the pending recordings after a week even when the recording entries are still inside the recurring recordings list.
Is the recurring recordings valid for a week only?

Anyone can help me? Thank you.

Hi, I want to deploy any future update when available from my server at client startup, can you run the install in silent mode so that there is no user input required during the install?

Hi,

How do i set the quality settings for the HVR2250, then how do i check this in NPVR?

The PVR150 i had a tool to set each level then i know what it was doing, cant find anything for the 2250.