anybody know of a simple audio editor that can do fades/cuts, handle mp3's and is simple to use?
i have cooledit pro but it's wayy too complicated for a newbie[it's not for me]
i remember a simple editor that came with soundblaster hardware..but can't find it..
and preferably free..
And everything works fine. Vprj gets created by comskip, VideoRedoCut.vbs correctly runs videoredo.exe and everything works.
When NPVR executes my PostProcessing.bat file, comskip creates vprj file, and then I can see (through numerous wscript.echo statements) that the VideoRedoCut.vbs script bombs out when it tries to create an object in the script (line of code in that blows up :::: Set VideoReDoSilent = WScript.CreateObject( "VideoReDo.VideoReDoSilent" ).
What could be causing this and are there any solutions?
ALSO, why can I not see a command window when NPVR runs my PostProcessing.bat file? When I try to use PAUSE statements in my PostProcessing.bat to debug, I cannot see what is going on. Is NPVR hiding the command window when it runs PostProcessing.bat?
Thanks for any help....
PostProcessing.bat:
Code:
@echo off
Rem PostProcessing.bat
Rem This script will be run automatically by GBPVR when found after a recording is finished
Rem To enable it put this file inside your GBPVR default program directory (C:\Program Files\devnz\gbpvr\)
Rem together with Comskip.exe, Comskip.ini and Comskip.dictionary
Rem The script is called with two parameters
Rem %1 is the fully qualified name of the recorded mpeg file.
Rem %2 is the channel number of the recording
echo [%date% %time%] Postprocessing.bat invoked on %1 recorded from channel %2 >>postprocessing.log
Rem The part below can be used to not run Comskip on certain channels, please modify for your conveniance.
Rem The channel numbers that should be skipped are the numbers between the double quotes ("").
Rem You can add "if" lines as much as you want
Rem To disable this behaviour use channel numbers outside the normal range, put a "rem" before the "if" or delete the "if" lines
Rem list of channels to not run comskip on
rem if "%2" == "27" goto eof
rem if "%2" == "36" goto eof
Rem this trick also makes it possible to have dedicated comskip.ini file for certain channels.
rem if the filename contains 'Football' go to the sports comskip
rem if not %1:Football == %1 echo [%date% %time%] Starting comskip using sports.ini..... >>postprocessing.log
rem if not %1:Football == %1 goto sports
C:
cd "C:\Users\Public\NPVR\Scripts\comskip"
if %2 == 6 echo [%date% %time%] Starting comskip using cbs.ini..... >>postprocessing.log
if %2 == 6 goto cbs
if %2 == 5 echo [%date% %time%] Starting comskip using abc.ini..... >>postprocessing.log
if %2 == 5 goto abc
if %2 == 11 echo [%date% %time%] Starting comskip using nbc.ini..... >>postprocessing.log
if %2 == 11 goto nbc
Rem use the default comskip.ini for all other channels
goto generic
:sports
comskip --ini=sports.ini %1
goto continue
:cbs
comskip --ini=cbs.ini %1
goto continue
:abc
comskip --ini=abc.ini %1
goto continue
:nbc
comskip --ini=nbc.ini %1
goto continue
rem This is an example of how to reuse a previously learned logo to prevent Comskip from learning the wrong logo
comskip --ini=channel65.ini --logo=channel65.logo.txt %1
goto continue
:generic
Rem The actual run of Comskip. Only one parameter, the name of the mpeg file to process.
Rem Comskip will read its settings from the Comskip.ini found in the same directory as Comskip.exe
Rem Both are supposed to be in the GBPVR default program directory. (C:\Program Files\devnz\gbpvr\)
echo [%date% %time%] Using generic comskip.ini comskip..... >>postprocessing.log
comskip %1
:continue
echo [%date% %time%] Comskip complete..... >>postprocessing.log
echo [%date% %time%] Starting Cutting/Reassembling process..... >>postprocessing.log
cscript //nologo "C:\Users\Public\NPVR\Scripts\VideoRedoCut.vbs" "%~dpn1.VPrj" "%~dpn1_Cleaned.ts" /t1 /q >>postprocessing2.log
echo [%date% %time%] Cutting/Reassembling process complete..... >>postprocessing.log
Rem RENAME the old .ts file and rename the new one to the old name
rem echo "%~dpn1.ts"
rem echo "%~dpn1_cleaned.ts"
rem move "%~dpn1.ts" "%~dpn1_original.ts"
rem move "%~dpn1_cleaned.ts" "%~dpn1.ts"
rem echo [%date% %time%] File renaming complete..... >>postprocessing.log
echo [%date% %time%] Postprocessing.bat complete >>postprocessing.log
echo [%date% %time%] >>postprocessing.log
echo [%date% %time%] >>postprocessing.log
rem RenameRecordings %1 > renamerecordings.log
:eof
I currently have two Scientific Atlanta STB's in my setup - both from Comcast. Anyone have any tips on keeping them both from responding to commands from the same remote? One of them is dedicated to my GBPVR machine (and uses firewire channel changing, has no need to respond to remote commands) and the other is independent, connected directly to the TV, and needs to be able to work with the remote.
I tried turning the dedicated box around so that the front panel doesn't face out - but it's still responding to the same commands issued by the remote. Would covering the front panel with electrical tape or some other insulator work? foil?
Just shifted to NPVR after real problems getting GBVRP working (see Banging head thread on GBPVR forum) and this is after years of good experience, but a wiped hard disk seems to have stopped GBPVR working properly.
Anyway, I've installed NPVR and can't really get it to work much. I running XP SP3 + all patches & the DirectX & other required patches listed on this forum.
I have 2 Hauppage Nova-T 90002 cards in the pc. I also have WinTV v6 from Hauppage and can watch any channel on that so I know my cards work & the aerial's fine.
My problems are:
1. No live TV.
2. Can't record
3. Channel 4 shows no programs after Sunday morning. Pain, as I want to record Time Team!
I'm used to posting logs for GBPVR, but have no idea if you can/should do the same for NPVR.
As always, any advice is gratefully received. Quite happy to be told I'm doing it all wrong! :o
Works fine OTA & "native" software finds QAM ok. Maybe same situation as Pinnacle 801e AKA PCTV HD Pro Stick that needed a patch?
Also, when I use (Live TV) full screen display (16x9), I get a black border on on edges. If I stretch the window, I can get a larger picture except for the window title bar. Any way to go borderless & use the whole screen? And it would be nice to be able to return from full screen by pressing Esc like many other programs do instead of having to Alt-Enter...
So many thanks.
Diane
Edit: Saw npvr.log was requested for other tuner, so here's mine.
I'm shopping around for a new wireless keyboard and would like to know what people are using on their systems. I'm looking something with a small form factor (i.e. no number pad) and integrated touchpad, trackball or thumbstick. I'd also like to keep it under $100.
I am pretty satisfied of my GPVR 1.4.7 client/server configuration and my wife is too.
Last week I installed NPVR on the server and gave it the access to one of my 4 tuners while the remaining three are still locked to GBPVR. As NPVR seemed working well I decided to install it also on one client and see how it performs.
Client has two networks WiFi for debug/VNC and wired for server connection.
At the kick off of NPVR because of the wired network was unplugged it tried to connect to the server through WiFi. With success indeed because of my DSL WiFi modem to which the server is connected too.
But, after I disconnected the WiFi network and plugged back the wired one I was surprised to see that NPVR now always tries to connect to server trough the WiFi net and not the wired.
Is there a way to change this misbehave?
Logs are attached. All into "NPVR.log.1" even a DirectX problem I have to solve...
Hi Everybody
I have installed Npvr on my developer pc and found that when I start the nPVR application my cpu load rises to approx. 40% and it stays at that level no matter what part of the menu I enter. If I right click an select settings then the cpu load idles out, but as soon as I click OK from the settings then the cpu load rises to 40% untill I close nPVR. When doing a scheduled recording without the nPVR application running the cpu is only loaded around 10%! This issue keeps my computer from entering sleep mode and keeps it running hot => noice from the fans.
I tried to install on a different pc and unfortunately the same thing happend on that machine. Both machines are win7 Pro 32-bit with 4 gb ram and 3.0 GHz Intel Pentium®4
