I came across something intereseting in one of the picture display modes of the video archive (the one with 4 small thumbnails on bottom row and a single large picture on on top. Often the 1st three large pictures in a directory displays in low resolution, with the corresponding thumbnails using correct aspect ratio. However the remaining pictures will display in high resolution, but their corresponing thumbnails will have wrong aspect ratio. Switching modes sometimes changes the behavior, but can't do it reliably.

Hiya,

just want to start by thanking the author for this update to the weather plugin.

The thing is having now rebuilt my sytem about 7 times with GBPVR 1.4.7 I get everything working just as I want until I install this plugin. And I have established that it is when I install this plugin that I start to get a very slow response on the server.

I'll drop back to a clean install again and then install the plugin again and zip up the logs. Everyone else seems to have this working brilliantly would love to know why it seems to go wrong for me!

cheers

Steeb

When I try to start TV Listings or TV Recordings from the NMT I get a ~2.5 minute delay. There are no apparent errors in the logs, but the wait happens prior to TV Listings saying it is about to update recordings schedule (about 10:04 in the attached log file).
2009-10-14 10:02:20.923 VERBOSE [6] Adding: ^K RECORDINGS_DELETE
2009-10-14 10:04:54.033 VERBOSE [6] TV Listings: About to update recording schedule...
2009-10-14 10:04:54.439 VERBOSE [6] TV Listings: Finished updating recording schedule.

Any ideas?

[ATTACHMENT NOT FOUND]

I was playing around a bit today and saw that TV Listings gives a little more in the logs:

2009-11-03 14:46:30.428 VERBOSE [6] User pressed@2: 13
2009-11-03 14:46:30.428 VERBOSE [6] about to call OnKeyDown()
2009-11-03 14:46:30.428 VERBOSE [6] Key pressed: Return
2009-11-03 14:46:30.428 VERBOSE [6] TV Listings: Activating...
2009-11-03 14:46:30.428 INFO [6] TV Listings: v2.10.3572.17427 initialising.
2009-11-03 14:46:30.521 VERBOSE [6] TV Listings: Backend initialised.
2009-11-03 14:46:30.537 VERBOSE [6] Skinhelper loading image from file: C:\Program Files\Devnz\GBPVR\skin2\Community-WS\TV Listings\..\_CoreImages\Detail_Normal.png
2009-11-03 14:46:30.599 VERBOSE [6] Skinhelper loading image from file: C:\Program Files\Devnz\GBPVR\skin2\Community-WS\TV Listings\down.png
2009-11-03 14:46:30.599 VERBOSE [6] Skinhelper loading image from file: C:\Program Files\Devnz\GBPVR\skin2\Community-WS\TV Listings\up.png
2009-11-03 14:48:58.084 VERBOSE [6] getValue cached value: /settings/ActiveMVPSkin : Community-WS
2009-11-03 14:48:58.303 VERBOSE [12] TV Listings: Client identifier is MVP 0006DC4233E0, assuming MVP.
2009-11-03 14:48:58.303 VERBOSE [12] TV Listings: Listings loader thread started.
2009-11-03 14:49:00.349 VERBOSE [6] UiStatic.SetArgs() is setting forceRefresh, and will return true to needsRendering()
2009-11-03 14:49:00.365 VERBOSE [6] TV Listings: About to update recording schedule...
2009-11-03 14:49:02.365 VERBOSE [6] TV Listings: Finished updating recording schedule.
2009-11-03 14:49:02.381 VERBOSE [6] TV Listings: activated.
2009-11-03 14:49:02.381 VERBOSE [6] OnKeyDown() complete
2009-11-03 14:49:02.381 VERBOSE [6] MVP sending frame

Thanks,
Leaded

I am running an older version 99.12 on one of my pcs for compability with PVR350 TV-Out. As Denmark have changed digital TV i was just planning to rescan the channels to get the new ones.

I had problems with that so i cleared the configuration and started from scratch. Deleted GBPVR folder and reinstalled 99.12. But each time i get to scan for channels i get "the capture source needs to be saved first. Save capture source first OK/Cancel". clicking OK i get the error "you must setup the recording source first".

I have checked the filtercheck and bda.ini, but as i can see the cards correctly the i assume that there is nothing wrong here.

However i have found in the config.exe-native gives some "filter"-errors that i do not understand.

This have worked for about 1-2 years. Please advise what i should look for.

Hauppauge wintv7 works fine and can find and show all the available uncoded channels.
That indicates to me that the T-500 drivers are loaded correctly, but i need help to find a workaround to get the new channels configured in GBPVR.

I know that its an old version, but i hope that some can help

I have my files trans-coded to wmv-700kb/s after they are done recording and then sent to a server. I have my students view these files using the mms protocol (mms://hcc-media.hawkeyecollege.edu/psych/11-02.wmv)

Before I switched to gbpvr I was able to ff/rew skip around when I recorded with the generic ATI ehome software, but the scheduling was horrible! The research I have done shows either something called index frames that needed to be added to the file when it trans-codes, or there may be a total duration file length issue.

if you try my older classes, they work fine…
(mms://hcc-media.hawkeyecollege.edu/psych/10-02.wmv)

the ffmpeg documentation doesn’t have anything about index frames, that i can understand (http://ffmpeg.org/ffmpeg-doc.html)

should i use windows media encoder to trans-code after my recordings with postprocessing.bat?

Has anyone succesfully got 2 working Nova T 500 in one machine?
If so can you tell me how?

Hi everyone,

I just upgraded my HVR-1600 to WinTv7 and the digital OTA looks good, for the exception of when there is a fast motion on the screen. Fast motion areas look like “horizontal lines distortions”. Is their a fix for this or setting changes.

Thank you in advance,

-Jay

With the previous version I could get all the way through to where I tried to map, but it hung when I changed to the next channel. I gave up.

Running an HVR-1800 Combo ATSC/QAM on SP3

With the new version, card setup and Schedules direct is fine and I'm through to the point where it scans, but then gives me the windows "send error, don't send box after it scans a few stations. I haven't fiddled with any of the other settings.


I attached my config.

Thanks.

I set up Auto-Convert TS recordings to mpg for the first time last night but it doesn't seem to have gone through with the process since I still don't see the mpg files. Which log do I look at to attempt to find the cause?

I've had this for ages...well propbably since slick skin came in. I quite often use my box to surf the web\ (like now) but leave gb on the main menu in the background.
Minimised or not it gives me a 60+ % cpu usage and the fans start spining up. It's not an issue I just always wondered why this is, in focus live TV gives me about 12% and an in focus maximised main menu about 19%.