The guide in nextpvr 5 updates fine automatically. But the guide does not update automatically in kodi. I know I can clean data and it will reload the guide and update. But is there a command in kodi to do this ? I can program a key in a kodi skin or assign a button on a remote. Apparently the command "startpvr" used to work in kodi but has now been discontinued.

I hope somebody here can help me with this. I am using NPVR V5 for recording TV programmes off air. However, back in May when I updated Windows 10 from version 1909 to version 2004, the recordings I then made were unwatchable (picture all broken up, freezing etc) so I went back to version 1909, and all was fine again. When the new W10 update came recently (version 20H2) I again gave it a try, but with the same result, so again I've gone back to version 1909. Has anyone else had this problem, and if so is there a workaround?

I had a very rare recording failure this morning: Upon signing in, I noticed that the tray icon was red. Normal enough except that no Hauppauge tuners were in use, either the DCR-3250 or the HDPVR2. These are all the devices I have. The desktop app showed what was scheduled to record so I looked at the recording folders and there it was, still open. I also looked at the DCR-3250's website for tuner status and no tuners were in use even though the tray icon showed tuner 0 in use. The recording was scheduled to stop at 10:03am and it did stop on time. But only one hour had been recorded. I looked in the log and saw that at about 9am, messages started repeating. I don't know what these messages mean.

Event start timestamp is 2020-11-23 07:59:00.018

Can anyone tell me what went wrong?

Attached Files

  logs-20201123-1006.zip (Size: 788.54 KB / Downloads: 2)

Using NextPVR 5, the "re-scan for device" setting isn't able to pull up my Magewell capture device.

Attached is the filtercheck output, which does see the device. Note that I'm using with component video and it also has a 3.5" analog audio line-in for the audio which is why you see it show up multiple times. I have tested with other capture software and I can see the video+audio. 

Any suggestions? Thanks in advance.

13:36:47.618 INFO found: USB Capture DVI+ Line In
13:36:47.619 INFO - (output) Capture
13:36:47.619 INFO             [00000000-0000-0000-0000000000000000]-00000000-00000000
13:36:47.619 INFO
13:36:47.619 INFO - (input)  Line In
13:36:47.619 INFO             [00000000-0000-0000-0000000000000000]-00000000-00000000

13:36:47.625 INFO found: USB Capture DVI+
13:36:47.650 INFO - (output) Capture
13:36:47.650 INFO             [00000000-0000-0000-0000000000000000]-00000000-00000000
13:36:47.650 INFO
13:36:47.650 INFO - (input)  Video Camera Terminal
13:36:47.650 INFO             [00000000-0000-0000-0000000000000000]-00000000-00000000
13:36:47.650 INFO
13:36:47.650 INFO
13:36:47.650 INFO found: USB Capture DVI+
13:36:47.650 INFO - (output) Capture
13:36:47.650 INFO             [00000000-0000-0000-0000000000000000]-00000000-00000000
13:36:47.650 INFO
13:36:47.650 INFO - (input)  HDMI
13:36:47.651 INFO             [00000000-0000-0000-0000000000000000]-00000000-00000000

Attached Files

  FilterCheck.zip (Size: 750 bytes / Downloads: 0)

When searching for a program in the guide by selecting "Tomorrow" and then returning by selecting "Today" to the current time in the guide I noticed that the yellow vertical line indicating current time is not displayed as before. After page refresh the timeline is displayed again.

I repeated the same steps and waited about 15 min or so to see if the line would appear again but it did not. Only a page refresh or navigating to a different page and back makes the timeline appear.

Thanks

Managed to figure out howto import an XC login, and populate the epg.
I have a couple issues, but will start with the stream dropping out,will be streaming fine one minute, the next it may or may not buffer, screen freeze, then drops back to the guide.
I'm running the server on 192.168.1.39 Debian buster, the client is 192.168.1.11 Archlinux Kodi Leia, no firewall, fiber to the house, 64 Down 20 up 51ms latency
My ISP assigns a private address 10.XX.XX.x,
Here's the zip

Attached Files

  logs-20201121-1729.zip (Size: 1.32 MB / Downloads: 2)

Hello,
I installed nextPVR version 5.0.9.201026 on a container in my nuc machine.

Nuc finds my tuner, but I can't seem to see on on nextPVR.

Here is my logs


  logs-20201121-1932.zip (Size: 18.15 KB / Downloads: 2)

Attached Files

Thumbnail(s)
   

This may not be that interesting to most, but I found it useful.

Using the Import/Export Recordings feature in NextPVR you can open the export files and view/manipulate the recordings in spreadsheet form (I used LibreOffice Calc).

In my version of Calc I had to go into Tools-Options-LibreOffice-Advanced and enable Experimental Features to make the "XML Sources" menu option available to open the exported recordings.

Attached is the .xsl Export Filter I setup with the recurring recordings formatting.  Note that in my version of Calc (at least) there seems to be a bug with the export filters where if two consecutive columns have the same value, it skips the second one in the output XML file.  In my file that was "Quality" and "Keep" both being zero for most entries.  To remedy this I moved the columns around in Calc, the new positions of which are reflected in the cell offsets in the .xsl file.  The cell offsets are the numerical column position (A=1).

Using this I was able to import my v4 recordings by changing all the v4 recordings to ChannelOID = 0 and ChannelName = All Channels.  I imagine you could get those values if you setup a recording on every station in your v5 install and exported, but that was more work than I wanted to do.  I was also able to eliminate the duplicates (in the v4 export and those we'd already setup in v5) prior to importing.

Cheers,
-Brad

Hello,

Was wondering if it was possible to schedule an advanced recording for a TV Show that may not currently be in my Schedules Direct data but may be at a later date? Say I wanted to schedule "AnyShow" "S04E05"? Is there a way to schedule into the future by Season/Episode numbers?

Thank you,
Mark

I am using Comskip and I think it's working well.  I have NextPVR running on a Windows server and I have Kodi running on a bunch of other Windows PCs.  Is it true that while playing Recordings within Kodi, it uses the NextPVR Add-on, but since Kodi and NextPVR are using http protocol, the markers present in the *.edl files are not available for doing the skipping?  I'm sorry if that's not exactly correct, I'm still learning.

For now, as others have suggested, I am going to have the Kodi clients pull up the actual *.ts files and that seems to do the trick.  It's not a huge deal at all, I just was wondering if there was some "trick" perhaps to get comskip to work within Kodi while maneuvering to the Recordings menu?  Hopefully this hasn't been addressed a million times and I just missed the FAQ!