Sub,
In FM Radio, the stations list primarily in numerical (frequency) order, but there are a few that are out of order. (This may be the order in which I entered them; I don't recall.)
How can I get them into strictly numerical/frequency order? I looked at the FM_RADIO_STATION table in gbpvr.mdb, and they appear there sorted in frequency order. And I don't see any other place or file where the display order might be set.
Also, I saw your earlier post advising someone to go to Config, select the FM Radio plugin, and hit the Settings button to edit stations. However, when I select the FM Radio plugin the Settings button is 'grayed-out' (not selectable).
Thanks in advance for this, and many thanks in general for your great support.

Cheers .... Bob

I had an older version of GBPVR and installed the newest one for the auto commercial skip. My previous version had been working flawlessly and EPG updates from Zap2IT were no problem. During the new configuration, I attempted to load the EPG and got the following message:

Failure in ChannelFactory:tore Channels[]: The INSERT INTO statement contains the following unknown field name:'wst_subtitle_page'. Make sure you have typed the name correctly, and try the operation again.

I have been trying for two days to load the EPG with no luck. Since I switched ISP from dialup to Roadrunner since I first subscribed to Zap2IT, I thought that might have been the problem. I had my wife fill out a new subscription with a different user name and password using the Roadrunner address, and got the same message when I tried to load the EPG.

Any ideas?

I've installed Video Archiver plug in. Everything seems to work as its supposed to except - DVD to MPEG. I have installed DVD-Decrypter, Besweet and mplex.exe. I believe I setup the paths correctly. I checked the directories and I don't have DVD2MPEG.dll anywhere on my hard drive. Also it seems I don't have VideoArchiveMonitor.exe either. I installed VideoArchivePlug-inSetup.zip. I'm running GBPRVR09413. Shouldn't I have dvd2mpeg.dll? :confused:

Bill

hi there,
i'm trying to play music with the MyMusic plugin and i get an error.
quote from the log file:
10/27/2005 12:23:58 AM.608 ERROR [2] Error: msg=0x100 (WM_KEYDOWN) hwnd=0x200344 wparam=0xd lparam=0x1c0001 result=0x0 : System.NullReferenceException: Object reference not set to an instance of an object.
at MyPicturesPlugin.GBPVREventViewer.Notify(EventTypes type, String eventText)
at xd426863f4d052758.xc4f12ec3a8a4c96b.x85b8d963f05ddf09(EventTypes x4f04899de3605e17, String xbc19b591abc4848a)
at xae10db17d26ba033.x62b73fb0db4f3947.x826e5d374a1e5ab9(String x8b449efd64797843, Boolean x859a785ef30c9007, Boolean xe1ea8da9364d6bfb)
at xae10db17d26ba033.x62b73fb0db4f3947.x313dba8d86564907(Queue x67c4bec203dc37ec)
at xae10db17d26ba033.xbb1566157f5f8b1f.AddAudioFileToQueue(String x8b449efd64797843)
at MyMusicPlugin.Files.Enter()
at MyMusicPlugin.MyMusicTask.OnKeyDown(KeyEventArgs e)
at xae10db17d26ba033.x86396f56243de9fb.OnKeyDown(KeyEventArgs xc4f45905cb1fc7ba)
at xae10db17d26ba033.xbb1566157f5f8b1f.xdae9991ab918b397(Object xdf2e3583f942db7b, KeyEventArgs xc4f45905cb1fc7ba)
at System.Windows.Forms.Control.OnKeyDown(KeyEventArgs e)
at System.Windows.Forms.Control.ProcessKeyEventArgs(Message& m)
at System.Windows.Forms.Control.ProcessKeyMessage(Message& m)
at System.Windows.Forms.Control.WmKeyChar(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at xae10db17d26ba033.xbb1566157f5f8b1f.WndProc(Message& x5f8f2c40c000ab2c)
this error also occours when I exit from Live TV mode.

i'll be thankfull if you could help me!

Just thought I would mention that I have included a zip file with the current Flat Blue High Vis skin which contains some alternate icons if you're bored with the current ones - I was working on a "green orb" skin, which I have since abandoned, but thought I might as well keep the icons around.

As you can see below, they are a bit shinier than the old ones - I played around with them a bit, and have sourced a number of new images from a variety of sourceforge projects (SVG Icons, KDE Graphite Iconsets and MediaPortal).

cheers,

tieke

Ok, This is the last thing I need to figure out before my GBPVR box is complete. I'm trying to get GBPVR to change my Motorola cable box correctly. Sub suggested in another thread that I look in the girder forums but the folks there didn't know gbpvr so I'm back here again. Sorry if this in not directly related to GBPVR but I know allot of folks use girder here so I'm hopping someone will have an answer.

I've read forums until my eyes crossed and I can find a good answer. I don't really know anything about girder other that what I've picked up experimenting with this.

Before I found GBPVR I tested with beyondtv. It worked pretty good. It was able to change channels perfectly on my cable box using a serial cable. GBPVR is so much better I really want to make it work so I installed Girder 3.3 and found the snapstream gml with serial commands for channel changing on the Motorola. I combined it with the needed resources from Pub's GBPVR.GML hosted here.

The GML I created is here
MotoGBPVR.GML

In Girder I can test each command and the proper number shows up on the Motorola's LCD. In GBPVR it seems to be hit and miss. Sometimes it will change to the correct number and sometimes it misses digits. It never works on identical double or triple digits like channel 11 or 33 or 509... If I go to 11 it changes the box to channel 1 If I go to 33 I end up on channel 3, If I go to 509 I end up on 9.

Zero Padding is off in GBPVR. All I got from the girder forums is that it maybe sending them to the box too fast and I need to include a wait command. I experimented with the wait time but I don't really understand what its doing so I didn't get far with it.

Can anyone help a noob? Am I going about this the correct way or is there a better way to accomplish this? My pvr-250 came with some sort of IR dongle but I dont think it will function as a blaster.

Hi

My dvr-ms files transcode to MPEG2 perfectly (and quickly)

but I cannot get the xvid transcoding to work. Either gbpvrconvert hangs or crashes.

log file below. I can't work out why it fails to locate filter: Elecard MPEG2 Video Decoder. Any ideas? I am just running the eval atm. I will gladly buy it if it works ok (or do I need to buy it to make it work?)


Also, why is it trying to locat the (outdated?) LAME MPEG Layer III Audio Encoder instead of "(LAME Audio Encoder", which it then appears to find ok.

I have previously had some partial xvid files which appear ok up until the point that gbpvrconvert crashes.

source is analogue from a pvr-350 (normal and low bitrates)

xvid is 1.03

any help much appreciated (this is the only problem i am currently having with gbpvr atm)

john

22:04:51.718 INFO Log started
22:04:51.718 VERBOSE SOURCE:\Video\TV\Grand Designs Revisited\Grand Designs Revisited_20051026_21002200.mpg DEST:\Video\TV\Grand Designs Revisited\Grand Designs Revisited_20051026_21002200.avi TYPE:XviD MPEG-4 Codec RECORDING_OID:1016
22:04:51.890 VERBOSE FindFilterByName(File Source (Async.))
22:04:51.984 VERBOSE FindFilterByName(GB-PVR Parser)
22:04:52.046 VERBOSE ConnectPins: 'Output' to 'Input'
22:04:52.312 VERBOSE getSetting(PreferredDecoder)
22:04:52.390 VERBOSE PreferredDecoder:default
22:04:52.390 VERBOSE FindFilterByName(Elecard MPEG2 Video Decoder)
22:04:52.406 ERROR FindFilterByName failed to locate filter: Elecard MPEG2 Video Decoder
22:04:52.968 VERBOSE FindFilterByName(AVI Mux)
22:04:52.968 VERBOSE ConnectFilters:1
.

22:04:52.968 VERBOSE ConnectFilters:10
22:04:52.984 VERBOSE ConnectFilters:OK
22:04:52.984 VERBOSE getSetting(PreferredAudioDecoder)
22:04:52.984 VERBOSE PreferredAudioDecoder:System Default
22:04:52.984 VERBOSE FindFilterByName(MPEG Audio Decoder)
22:04:53.015 VERBOSE ConnectFilters:1
.
22:04:53.015 VERBOSE ConnectFilters:10
22:04:53.015 VERBOSE ConnectFilters:OK
22:04:53.015 VERBOSE FindFilterByName(LAME MPEG Layer III Audio Encoder)
22:04:53.015 ERROR FindFilterByName failed to locate filter: LAME MPEG Layer III Audio Encoder
22:04:53.015 VERBOSE FindFilterByName(LAME Audio Encoder)
22:04:53.046 VERBOSE Using LAME Audio Encoder
22:04:53.046 VERBOSE ConnectFilters:1
.
22:04:53.046 VERBOSE ConnectFilters:10
22:04:53.046 VERBOSE ConnectFilters:OK
22:04:53.046 VERBOSE ConnectFilters:1
.
22:04:53.046 VERBOSE ConnectFilters:10
22:04:53.046 VERBOSE ConnectFilters:OK
22:04:53.046 VERBOSE FindFilterByName(File writer)
22:04:53.046 VERBOSE ConnectFilters:1
.
22:04:53.046 VERBOSE ConnectFilters:10
22:04:53.062 VERBOSE ConnectFilters:OK
22:04:53.062 INFO Graph contains the following filters:
22:04:53.062 INFO - GB-PVR Writer
22:04:53.062 INFO - AVI Mux
22:04:53.062 INFO - LAME Audio Encoder
22:04:53.062 INFO - XviD MPEG-4 Codec
22:04:53.062 INFO - MPEG Audio Decoder
22:04:53.062 INFO - Elecard MPEG-2 Video Decoder
22:04:53.062 INFO - GB-PVR Parser
22:04:53.062 INFO - D:\Video\TV\Grand Designs Revisited\Grand Designs Revisited_20051026_21002200.mpg
22:04:53.125 VERBOSE About to start graph
22:04:53.265 VERBOSE transcode processing started
22:04:53.265 VERBOSE getSetting(DatabaseConnectionString)
22:04:53.265 VERBOSE DatabaseConnectionStringrovider=Microsoft.Jet.OLEDB.4.0;Data Source=".\gbpvr.mdb";User Id=admin;Password=
22:20:24.531 VERBOSE Received EC_ERRORABORT
22:20:24.531 VERBOSE transcode processing complete

Reven,
I reported a bug that Sub says is yours. See this thread: http://forums.nextpvr.com/showthread.php?t=10053

Thx .... Bob

Slightly new colours, new buttons.
Supports fastfind and video archive plugins.
http://members.shaw.ca/dvdeo/Mtnlake2.zip

If I'm not mistaken, if you delete a recording, it will just return if you restart, or at the next EPG update. If that's true: Is there a way (or way to add) the ability to do a "Seen It" for a single reocrding (that is part of a reoccuring group), that doesn't mark it as watched (so the next occurance can be recorded)?

Zap2It has the episode of Lost scheduled for 3wks from now as being on tonight (next 3wks are actually repeats). If I just deleted it, it would have returned when I did a restart this afternoon. If I mark it as Seen It, I won't get it when it actually airs. If I suspend the Reoccuring, I may forget to turn it back on.

I believe you can edit a file manually to do this, but it may be nice addition via remote if possible.

Btw, did you get your asking for the house after all?